[Thu Dec  1 15:29:25 2011] Detection parameters:
  Position = (282.7, 280.6) = 9 22 46.02 -63 17 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.8 +/- 10.4
  Background counts = 6.5
  Rate = 0.007 +/- 0.002

[Thu Dec  1 15:29:25 2011] Off-axis axis estimate = 1.73'
[Thu Dec  1 17:12:52 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 17:12:52 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Dec  1 17:12:52 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Dec  1 17:12:52 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 7.29"
[Thu Dec  1 17:47:32 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Dec  1 17:47:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_src5.csv
[Thu Dec  1 17:47:32 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Dec  1 17:47:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_src5.csv
[Thu Dec  1 17:47:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 17:47:32 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Dec  1 17:47:32 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Dec  1 17:47:32 2011] Fit fullrun_mos2_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Dec  1 17:47:43 2011] Warning, spatial fit 5 centroid is now closest to src. 3
[Thu Dec  1 17:47:43 2011] Source 10 is offset by 1.028611 and -0.266070 pixels which is larger than
2 X fitted extent = 0.936354 x 0.936354, not incorporating fit results
[Thu Dec  1 17:47:43 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 17:47:43 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 17:47:43 2011] Assessing source extent using major
[Thu Dec  1 17:47:43 2011] Source does appear to be extended
[Thu Dec  1 17:47:43 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 18:45:39 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 18:45:39 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Dec  1 18:45:39 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Dec  1 18:45:39 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.29"
[Thu Dec  1 18:57:08 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Dec  1 18:57:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_src3.csv
[Thu Dec  1 18:57:08 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Dec  1 18:57:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_src3.csv
[Thu Dec  1 18:57:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 18:57:08 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Dec  1 18:57:08 2011] fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Dec  1 18:57:08 2011] Fit fullrun_mos2_xmm0051590201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Dec  1 18:57:13 2011] Warning, spatial fit 3 centroid is now closest to src. 2
[Thu Dec  1 18:57:13 2011] Spatial fit model total counts = 220.469000, observed total counts = 220.000000
[Thu Dec  1 18:57:13 2011] Offset between fit and detection position for source 10 = 1.054632 pixels
[Thu Dec  1 18:57:13 2011] Warning, changing simple spatial fit ID from 3 to 4
[Thu Dec  1 18:57:13 2011] 228.556030 total counts/ 219.429000 bgd. counts: snr = 0.616144
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.054632 pixels
  Position = (281.7, 281.0) = 9 22 46.65 -63 17 21.2
  Extent = 2.3 (1.9-7.6)", rotation angle = 0
  Source counts = 9.1 +/- 15.1
  Background counts = 219.4
  Rate = 0.001 +/- 0.002
  Deleting source due to low Poisson probability