[Thu Dec  1 15:29:03 2011] Detection parameters:
  Position = (174.0, 254.3) = 9 23 56.28 -63 19 14.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.4 +/- 7.2
  Background counts = 1.6
  Rate = 0.009 +/- 0.002

[Thu Dec  1 15:29:03 2011] Off-axis axis estimate = 9.57'
[Thu Dec  1 16:55:34 2011] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Thu Dec  1 16:55:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec  1 16:55:34 2011] Initial guess for spatial extent in simple fitting = 11.22"
[Thu Dec  1 16:55:34 2011] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.950
[Thu Dec  1 16:55:34 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 11.22"
[Thu Dec  1 17:12:51 2011] fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Dec  1 17:12:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_src3.csv
[Thu Dec  1 17:12:51 2011] fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Dec  1 17:12:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_src3.csv
[Thu Dec  1 17:12:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec  1 17:12:51 2011] fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Dec  1 17:12:51 2011] fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Dec  1 17:12:51 2011] Fit fullrun_mos1_xmm0051590201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Dec  1 17:47:40 2011] Spatial fit model total counts = 43.998400, observed total counts = 44.000000
[Thu Dec  1 17:47:40 2011] Offset between fit and detection position for source 2 = 0.097283 pixels
[Thu Dec  1 17:47:40 2011] 45.053400 total counts/ 22.681700 bgd. counts: snr = 4.697439
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.097283 pixels
  Position = (174.0, 254.4) = 9 23 56.26 -63 19 15.2
  Extent = 4.4 (3.3-6.1)", rotation angle = 0
  Source counts = 22.4 +/- 6.7
  Background counts = 22.7
  Rate = 0.004 +/- 0.001
[Thu Dec  1 17:47:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec  1 17:47:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec  1 17:47:40 2011] Assessing source extent using major axis lower bound
[Thu Dec  1 17:47:40 2011] Source does appear to be extended
[Thu Dec  1 17:47:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec  1 17:47:40 2011] Deleting source due to low Poisson probability 0.8