[Sat Aug 25 13:10:32 2012] Detection parameters:
  Position = (288.1, 216.0) = 9 22 42.56 -63 22 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 17.3
  Background counts = 86.9
  Rate = 0.002 +/- 0.0004

[Sat Aug 25 13:10:32 2012] Off-axis axis estimate = 6.02'
[Sat Aug 25 13:17:33 2012] Using EEF radius (= 9.44 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 13:17:33 2012] Initial guess for spatial extent in simple fitting = 9.44"
[Sat Aug 25 13:17:33 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.262
[Sat Aug 25 13:17:33 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 9.44"
[Sat Aug 25 20:22:08 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src79.ximg exists
[Sat Aug 25 20:22:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src79.csv
[Sat Aug 25 20:22:08 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src79_1.ximg exists
[Sat Aug 25 20:22:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src79.csv
[Sat Aug 25 20:22:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 20:22:10 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Sat Aug 25 20:22:10 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Sat Aug 25 20:22:10 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Sun Aug 26 00:04:12 2012] Spatial fit model total counts = 993.000000, observed total counts = 993.000000
[Sun Aug 26 00:04:12 2012] Offset between fit and detection position for source 81 = 0.224806 pixels
[Sun Aug 26 00:04:12 2012] 999.726600 total counts/ 920.781000 bgd. counts: snr = 2.601655
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 0.224806 pixels
  Position = (287.9, 216.0) = 9 22 42.71 -63 22 3.8
  Extent = 6.2 (3.0-9.1)", rotation angle = 0
  Source counts = 78.9 +/- 31.6
  Background counts = 920.8
  Rate = 0.001 +/- 0.0006
[Sun Aug 26 00:04:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:13 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:13 2012] Source does appear to be extended
[Sun Aug 26 00:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:04:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 00:04:49 2012] Initial guess for spatial extent in simple fitting = 6.22"
[Sun Aug 26 00:04:49 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.075
[Sun Aug 26 00:04:49 2012] Giving source the simple spatial ID 65 for pass 1, mean size = 6.22"
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src65.ximg exists
[Sun Aug 26 08:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src65.csv
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src65_1.ximg exists
[Sun Aug 26 08:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src65.csv
[Sun Aug 26 08:50:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src65_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src65.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 08:50:27 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src65.ximg exists
[Sun Aug 26 08:50:27 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src65_1.ximg exists
[Sun Aug 26 08:50:27 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src65 appears to have run properly
[Sun Aug 26 17:58:41 2012] Spatial fit model total counts = 992.998000, observed total counts = 993.000000
[Sun Aug 26 17:58:41 2012] Offset between fit and detection position for source 81 = 0.006687 pixels
[Sun Aug 26 17:58:41 2012] 999.711000 total counts/ 921.574000 bgd. counts: snr = 2.573900
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 0.006687 pixels
  Position = (287.9, 216.0) = 9 22 42.70 -63 22 3.8
  Extent = 6.2 (3.0-9.1)", rotation angle = 0
  Source counts = 78.1 +/- 31.6
  Background counts = 921.6
  Rate = 0.001 +/- 0.0006
[Sun Aug 26 17:58:41 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:41 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:41 2012] Source does appear to be extended
[Sun Aug 26 17:58:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 17:59:09 2012] XMMSAS src. selection expression = ellipse(24997.763500, 18742.922000, 369.034811, 369.034811, 0.000000, X, Y)
[Sun Aug 26 17:59:09 2012] Writing source region out to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src81_src.reg
[Sun Aug 26 17:59:09 2012] Extracting stamp from image fullrun_pn_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (267, 195) - (309, 237)
[Sun Aug 26 17:59:09 2012] XMMSAS bgd. selection expression = annulus(24997.763500, 18742.922000, 615.058018, 1230.116035, X, Y)
[Sun Aug 26 17:59:09 2012] Writing fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src81.gif
[Sun Aug 26 20:37:48 2012] Mean detx,y = (4519.09, -3133.72) 
[Sun Aug 26 20:37:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 20:38:06 2012] grppha failed
[Sun Aug 26 20:38:06 2012] Setting source spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src81_src.pi.gz
[Sun Aug 26 20:38:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Sun Aug 26 20:47:52 2012] Not generating rmf since there are only 78 counts
[Sun Aug 26 20:47:52 2012] rmf not generated due to insufficient counts
[Sun Aug 26 21:25:44 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:44 2012] Error reading totcts from fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src81_src.pi.gz
[Sun Aug 26 21:25:44 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:49 2012] Source 81 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Aug 26 21:25:50 2012] xmm0051590101/analysis//spectral/fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src81_pl.csv not found, spectral fit skipped or did not complete