[Sat Aug 25 13:10:31 2012] Detection parameters:
  Position = (330.8, 269.2) = 9 22 14.98 -63 18 10.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.8 +/- 22.6
  Background counts = 114.9
  Rate = 0.002 +/- 0.0005

[Sat Aug 25 13:10:32 2012] Off-axis axis estimate = 3.16'
[Sat Aug 25 13:17:33 2012] Using EEF radius (= 8.01 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 13:17:33 2012] Initial guess for spatial extent in simple fitting = 8.01"
[Sat Aug 25 13:17:33 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.912
[Sat Aug 25 13:17:33 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 8.01"
[Sat Aug 25 20:22:08 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src64.ximg exists
[Sat Aug 25 20:22:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src64.csv
[Sat Aug 25 20:22:08 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src64_1.ximg exists
[Sat Aug 25 20:22:08 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src64.csv
[Sat Aug 25 20:22:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 20:22:10 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Sat Aug 25 20:22:10 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Sat Aug 25 20:22:10 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Sun Aug 26 00:04:12 2012] Spatial fit model total counts = 2179.320000, observed total counts = 2131.000000
[Sun Aug 26 00:04:12 2012] Offset between fit and detection position for source 64 = 4.404498 pixels
[Sun Aug 26 00:04:12 2012] 2126.916000 total counts/ 1592.160000 bgd. counts: snr = 13.401775
Spatial fit parameters:
  Offset between fit and detection position for source 64 = 4.404498 pixels
  Position = (326.4, 269.7) = 9 22 17.81 -63 18 10.2
  Extent = 16.0 (16.0-32.0)", rotation angle = 0
  Source counts = 534.8 +/- 46.1
  Background counts = 1592.2
  Rate = 0.009 +/- 0.0008
[Sun Aug 26 00:04:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:13 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:13 2012] Source does appear to be extended
[Sun Aug 26 00:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:04:13 2012] Source is confused with source 59
[Sun Aug 26 00:04:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 00:04:49 2012] Initial guess for spatial extent in simple fitting = 16.02"
[Sun Aug 26 00:04:49 2012] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.029
[Sun Aug 26 00:04:49 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 16.02"
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src51.ximg exists
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src51_1.ximg exists
[Sun Aug 26 08:50:26 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src51 appears to have run properly
[Sun Aug 26 08:50:27 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sun Aug 26 08:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun Aug 26 08:50:27 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sun Aug 26 08:50:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sun Aug 26 08:50:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:41 2012] Warning, spatial fit 51 centroid is now closest to src. 59
[Sun Aug 26 17:58:41 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:41 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:41 2012] Source does appear to be extended
[Sun Aug 26 17:58:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 17:59:09 2012] XMMSAS src. selection expression = ellipse(28351.410000, 23414.518800, 961.302028, 961.302028, 0.000000, X, Y)
[Sun Aug 26 17:59:09 2012] Writing source region out to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src64_src.reg
[Sun Aug 26 17:59:09 2012] Extracting stamp from image fullrun_pn_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (271, 214) - (382, 325)
[Sun Aug 26 17:59:09 2012] XMMSAS bgd. selection expression = annulus(28351.410000, 23414.518800, 1602.170046, 3204.340092, X, Y) && !ellipse(26046.306580, 23984.654000, 1802.834452, 1802.834452, 0.000000, X, Y) && !ellipse(30180.885651, 26781.346313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.504480, 26758.763000, 423.612012, 423.612012, 0.000000, X, Y) && !ellipse(28263.524384, 24232.013733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.266000, 23886.326000, 1228.680035, 1228.680035, 0.000000, X, Y) && !ellipse(27121.675934, 23061.544067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.041931, 21099.946030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26341.665497, 22260.649170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.602051, 21736.705688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27592.949400, 19889.741600, 321.003209, 321.003209, 0.000000, X, Y)
[Sun Aug 26 17:59:09 2012] Writing fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src64.gif
[Sun Aug 26 20:21:26 2012] Mean detx,y = (-938.67, -1878.86) 
[Sun Aug 26 20:21:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 20:21:59 2012] grppha failed
[Sun Aug 26 20:21:59 2012] Setting source spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src64_src.pi.gz
[Sun Aug 26 20:21:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Sun Aug 26 21:25:43 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:43 2012] Error reading totcts from fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src64_src.pi.gz
[Sun Aug 26 21:25:44 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:49 2012] Flag c found in src. 64 procflags, skipping spectral fitting
[Sun Aug 26 21:25:49 2012] Source 64 has no response, skipping
[Sun Aug 26 21:25:50 2012] xmm0051590101/analysis//spectral/fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src64_pl.csv not found, spectral fit skipped or did not complete