[Sat Aug 25 13:10:31 2012] Detection parameters:
  Position = (319.0, 270.7) = 9 22 22.64 -63 18 0.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 168.4 +/- 33.8
  Background counts = 129.2
  Rate = 0.004 +/- 0.0008

[Sat Aug 25 13:10:32 2012] Off-axis axis estimate = 2.50'
[Sat Aug 25 13:17:33 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 13:17:33 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sat Aug 25 13:17:33 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.974
[Sat Aug 25 13:17:33 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 7.68"
[Sat Aug 25 20:22:08 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src62.ximg exists
[Sat Aug 25 20:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src62.csv
[Sat Aug 25 20:22:08 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src62_1.ximg exists
[Sat Aug 25 20:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src62.csv
[Sat Aug 25 20:22:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 20:22:10 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sat Aug 25 20:22:10 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sat Aug 25 20:22:10 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Sun Aug 26 00:04:12 2012] Spatial fit model total counts = 3729.430000, observed total counts = 2837.000000
[Sun Aug 26 00:04:12 2012] Poor agreement between spatial fit and data for source 62
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 26 00:04:12 2012] Spatial fit model total counts = 7009.120000, observed total counts = 7201.000000
[Sun Aug 26 00:04:12 2012] Offset between fit and detection position for source 62 = 7.266291 pixels
[Sun Aug 26 00:04:12 2012] 5813.690000 total counts/ 3362.630000 bgd. counts: snr = 42.268263
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 7.266291 pixels
  Position = (313.2, 275.1) = 9 22 26.36 -63 17 46.6
  Extent = 15.4 (15.3-30.7)", rotation angle = 0
  Source counts = 2451.1 +/- 76.2
  Background counts = 3362.6
  Rate = 0.04 +/- 0.001
[Sun Aug 26 00:04:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:13 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:13 2012] Source does appear to be extended
[Sun Aug 26 00:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:04:13 2012] Source is confused with source 69
[Sun Aug 26 00:04:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 00:04:49 2012] Initial guess for spatial extent in simple fitting = 15.36"
[Sun Aug 26 00:04:49 2012] source mask rpix=3.5, npix_max = 64, mask sum = 37, frac = 0.569
[Sun Aug 26 00:04:49 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 15.36"
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src49.ximg exists
[Sun Aug 26 08:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src49.csv
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src49_1.ximg exists
[Sun Aug 26 08:50:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src49.csv
[Sun Aug 26 08:50:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 08:50:27 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Sun Aug 26 08:50:27 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Sun Aug 26 08:50:27 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Sun Aug 26 17:58:41 2012] Source 62 is offset by -4.800483 and 2.131241 pixels which is larger than
2 X fitted extent = 3.066874 x 3.066874, not incorporating fit results
[Sun Aug 26 17:58:41 2012] Warning, spatial fit 49 centroid is now closest to src. 69
[Sun Aug 26 17:58:41 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:41 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:41 2012] Source does appear to be extended
[Sun Aug 26 17:58:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 17:59:09 2012] Counts = 2451.060000, rescaling region sizes by 2.000000
[Sun Aug 26 17:59:09 2012] XMMSAS src. selection expression = ellipse(27198.266000, 23886.326000, 1843.020053, 1843.020053, 0.000000, X, Y)
[Sun Aug 26 17:59:09 2012] Writing source region out to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src62_src.reg
[Sun Aug 26 17:59:09 2012] Extracting stamp from image fullrun_pn_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (207, 169) - (419, 381)
[Sun Aug 26 17:59:09 2012] XMMSAS bgd. selection expression = annulus(27198.266000, 23886.326000, 6143.400177, 12286.800354, X, Y) && !ellipse(26046.306580, 23984.654000, 1802.834452, 1802.834452, 0.000000, X, Y) && !ellipse(17347.609150, 33373.250910, 1727.880050, 848.296515, 61.403393, X, Y) && !ellipse(18738.045242, 31791.407837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19145.610000, 31316.108000, 1588.792046, 1588.792046, 0.000000, X, Y) && !ellipse(15221.720459, 31395.282776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.608000, 31012.904000, 1615.192046, 1615.192046, 0.000000, X, Y) && !ellipse(19732.155800, 30724.907400, 2050.192059, 426.462412, 46.856000, X, Y) && !ellipse(20633.892000, 29813.116000, 1504.504043, 1504.504043, 0.000000, X, Y) && !ellipse(20460.058000, 29940.865600, 2263.232065, 430.616812, 46.791000, X, Y) && !ellipse(21264.420000, 29181.420000, 1396.160040, 435.658413, 52.356000, X, Y) && !ellipse(21574.250000, 28787.340000, 966.320028, 966.320028, 0.000000, X, Y) && !ellipse(21999.832785, 28472.209535, 1635.856047, 722.281004, 45.764220, X, Y) && !ellipse(22395.406000, 27834.272000, 1977.712057, 1977.712057, 0.000000, X, Y) && !ellipse(32706.078705, 27458.984131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.886000, 26655.508000, 1159.568033, 1159.568033, 0.000000, X, Y) && !ellipse(36070.653961, 21076.873825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38251.781769, 20754.465652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23322.730200, 35275.683200, 543.955216, 327.084009, 355.337324, X, Y) && !ellipse(15085.303781, 22118.539215, 523.681012, 324.567016, 80.804923, X, Y) && !ellipse(15823.756317, 15014.017517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22502.586060, 35516.923706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22348.897034, 34315.910583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16091.353200, 32678.860000, 324.690409, 324.690409, 0.000000, X, Y) && !ellipse(16517.936295, 31018.303131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22007.701874, 29805.390167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19174.792252, 28994.238892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.235200, 28578.378400, 362.732810, 362.732810, 0.000000, X, Y) && !ellipse(30180.885651, 26781.346313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.504480, 26758.763000, 423.612012, 423.612012, 0.000000, X, Y) && !ellipse(35554.046326, 26321.327972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32176.575901, 25721.170657, 604.350972, 333.738574, 97.358008, X, Y) && !ellipse(36588.360779, 24817.973389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20498.897842, 24504.706482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32346.181000, 24362.646600, 423.480012, 423.480012, 0.000000, X, Y) && !ellipse(28263.524384, 24232.013733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20514.577118, 23965.661194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28351.410000, 23414.518800, 1281.736037, 1281.736037, 0.000000, X, Y) && !ellipse(18811.508575, 22668.931610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17047.392944, 22143.312805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40280.266632, 21925.336227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.675934, 23061.544067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.041931, 21099.946030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26341.665497, 22260.649170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.602051, 21736.705688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19515.502760, 20941.831400, 369.832811, 369.832811, 0.000000, X, Y) && !ellipse(27592.949400, 19889.741600, 321.003209, 321.003209, 0.000000, X, Y) && !ellipse(18674.096207, 19828.816238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.354660, 19667.565689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15223.601547, 19573.588272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24997.763500, 18742.922000, 492.046414, 492.046414, 0.000000, X, Y) && !ellipse(33679.709808, 18299.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15121.783829, 17314.342865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35736.930054, 16632.528687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30511.046509, 16733.309616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23855.910800, 16182.717400, 817.400024, 817.400024, 0.000000, X, Y) && !ellipse(34735.633545, 15691.104416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27482.377000, 15668.506800, 409.011212, 409.011212, 0.000000, X, Y) && !ellipse(20138.991364, 15001.277359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24599.217560, 12620.148849, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 26 17:59:09 2012] Writing fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src62.gif
[Sun Aug 26 20:14:37 2012] Mean detx,y = (140.54, -61.75) 
[Sun Aug 26 20:14:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 20:19:49 2012] grppha failed
[Sun Aug 26 20:19:50 2012] Setting source spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src62_src.pi.gz
[Sun Aug 26 20:19:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Sun Aug 26 21:25:43 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:43 2012] Error reading totcts from fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src62_src.pi.gz
[Sun Aug 26 21:25:44 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:49 2012] Flag b found in src. 62 procflags, skipping spectral fitting
[Sun Aug 26 21:25:49 2012] Flag p found in src. 62 procflags, skipping spectral fitting
[Sun Aug 26 21:25:49 2012] Flag c found in src. 62 procflags, skipping spectral fitting
[Sun Aug 26 21:25:49 2012] Source 62 has no response, skipping
[Sun Aug 26 21:25:50 2012] xmm0051590101/analysis//spectral/fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete