[Sat Aug 25 13:10:30 2012] Detection parameters:
  Position = (201.9, 380.9) = 9 23 37.88 -63 10 4.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2219.7 +/- 60.3
  Background counts = 58.0
  Rate = 0.04 +/- 0.001

[Sat Aug 25 13:10:32 2012] Off-axis axis estimate = 9.21'
[Sat Aug 25 13:17:33 2012] Using EEF radius (= 11.03 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 13:17:33 2012] Initial guess for spatial extent in simple fitting = 11.03"
[Sat Aug 25 13:17:33 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.976
[Sat Aug 25 13:17:33 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.03"
[Sat Aug 25 20:22:07 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src3.ximg exists
[Sat Aug 25 20:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src3.csv
[Sat Aug 25 20:22:07 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Aug 25 20:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src3.csv
[Sat Aug 25 20:22:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 20:22:09 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Aug 25 20:22:09 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Aug 25 20:22:09 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Aug 26 00:04:12 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Sun Aug 26 00:04:12 2012] Spatial fit model total counts = 6715.430000, observed total counts = 6849.000000
[Sun Aug 26 00:04:12 2012] Offset between fit and detection position for source 3 = 3.766904 pixels
[Sun Aug 26 00:04:12 2012] Warning, changing simple spatial fit ID from 3 to 4
[Sun Aug 26 00:04:12 2012] 6521.080000 total counts/ 1671.530000 bgd. counts: snr = 118.616295
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.766904 pixels
  Position = (200.0, 384.2) = 9 23 39.14 -63 9 51.4
  Extent = 21.6" x 10.6", rotation angle = 61
  Source counts = 4849.6 +/- 80.8
  Background counts = 1671.5
  Rate = 0.09 +/- 0.001
[Sun Aug 26 00:04:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:13 2012] Assessing source extent using major
[Sun Aug 26 00:04:13 2012] Source does appear to be extended
[Sun Aug 26 00:04:13 2012] Computing asymmetry using major and minor axis, asym = 2.04
[Sun Aug 26 00:04:13 2012] Source is asymmetric
[Sun Aug 26 00:04:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 00:04:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 26 00:04:49 2012] Initial guess for spatial extent in simple fitting = 16.10"
[Sun Aug 26 00:04:49 2012] source mask rpix=3.7, npix_max = 70, mask sum = 64, frac = 0.906
[Sun Aug 26 00:04:49 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 16.10"
[Sun Aug 26 08:50:25 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src2.ximg exists
[Sun Aug 26 08:50:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src2.csv
[Sun Aug 26 08:50:25 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Aug 26 08:50:25 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src2.csv
[Sun Aug 26 08:50:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Aug 26 08:50:26 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Aug 26 17:58:41 2012] Warning, spatial fit 2 centroid is now closest to src. 6
[Sun Aug 26 17:58:41 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:41 2012] Assessing source extent using major
[Sun Aug 26 17:58:41 2012] Source does appear to be extended
[Sun Aug 26 17:58:41 2012] Computing asymmetry using major and minor axis, asym = 2.04
[Sun Aug 26 17:58:41 2012] Source is asymmetric
[Sun Aug 26 17:59:07 2012] Counts = 4849.550000, rescaling region sizes by 2.000000
[Sun Aug 26 17:59:07 2012] XMMSAS src. selection expression = ellipse(17347.609150, 33373.250910, 2591.820075, 1272.444772, 61.403393, X, Y)
[Sun Aug 26 17:59:07 2012] Writing source region out to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src3_src.reg
[Sun Aug 26 17:59:07 2012] Extracting stamp from image fullrun_pn_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (51, 235) - (349, 533)
[Sun Aug 26 17:59:07 2012] XMMSAS bgd. selection expression = annulus(17347.609150, 33373.250910, 8639.400249, 17278.800497, X, Y) && !ellipse(26046.306580, 23984.654000, 1802.834452, 1802.834452, 0.000000, X, Y) && !ellipse(18738.045242, 31791.407837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19145.610000, 31316.108000, 1588.792046, 1588.792046, 0.000000, X, Y) && !ellipse(15221.720459, 31395.282776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19522.608000, 31012.904000, 1615.192046, 1615.192046, 0.000000, X, Y) && !ellipse(19732.155800, 30724.907400, 2050.192059, 426.462412, 46.856000, X, Y) && !ellipse(20633.892000, 29813.116000, 1504.504043, 1504.504043, 0.000000, X, Y) && !ellipse(20460.058000, 29940.865600, 2263.232065, 430.616812, 46.791000, X, Y) && !ellipse(21264.420000, 29181.420000, 1396.160040, 435.658413, 52.356000, X, Y) && !ellipse(21574.250000, 28787.340000, 966.320028, 966.320028, 0.000000, X, Y) && !ellipse(21999.832785, 28472.209535, 1635.856047, 722.281004, 45.764220, X, Y) && !ellipse(22395.406000, 27834.272000, 1977.712057, 1977.712057, 0.000000, X, Y) && !ellipse(32706.078705, 27458.984131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23535.886000, 26655.508000, 1159.568033, 1159.568033, 0.000000, X, Y) && !ellipse(23322.730200, 35275.683200, 543.955216, 327.084009, 355.337324, X, Y) && !ellipse(15085.303781, 22118.539215, 523.681012, 324.567016, 80.804923, X, Y) && !ellipse(21936.140869, 37289.062836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20716.689141, 37272.660991, 620.822941, 349.230084, 340.018740, X, Y) && !ellipse(22502.586060, 35516.923706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22348.897034, 34315.910583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16091.353200, 32678.860000, 324.690409, 324.690409, 0.000000, X, Y) && !ellipse(16517.936295, 31018.303131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22007.701874, 29805.390167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19174.792252, 28994.238892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.235200, 28578.378400, 362.732810, 362.732810, 0.000000, X, Y) && !ellipse(30180.885651, 26781.346313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.504480, 26758.763000, 423.612012, 423.612012, 0.000000, X, Y) && !ellipse(32176.575901, 25721.170657, 604.350972, 333.738574, 97.358008, X, Y) && !ellipse(20498.897842, 24504.706482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32346.181000, 24362.646600, 423.480012, 423.480012, 0.000000, X, Y) && !ellipse(28263.524384, 24232.013733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20514.577118, 23965.661194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27198.266000, 23886.326000, 1228.680035, 1228.680035, 0.000000, X, Y) && !ellipse(11319.529648, 23875.998199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28351.410000, 23414.518800, 1281.736037, 1281.736037, 0.000000, X, Y) && !ellipse(18811.508575, 22668.931610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17047.392944, 22143.312805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.675934, 23061.544067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27739.041931, 21099.946030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26341.665497, 22260.649170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25519.602051, 21736.705688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19515.502760, 20941.831400, 369.832811, 369.832811, 0.000000, X, Y) && !ellipse(27592.949400, 19889.741600, 321.003209, 321.003209, 0.000000, X, Y) && !ellipse(18674.096207, 19828.816238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20777.354660, 19667.565689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15223.601547, 19573.588272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24997.763500, 18742.922000, 492.046414, 492.046414, 0.000000, X, Y) && !ellipse(33679.709808, 18299.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15121.783829, 17314.342865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30511.046509, 16733.309616, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23855.910800, 16182.717400, 817.400024, 817.400024, 0.000000, X, Y) && !ellipse(34735.633545, 15691.104416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26153.044250, 41461.428101, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 26 17:59:07 2012] Writing fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src3.gif
[Sun Aug 26 18:08:18 2012] Mean detx,y = (206.47, 12747.10) 
[Sun Aug 26 18:08:29 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 18:14:47 2012] grppha failed
[Sun Aug 26 18:14:47 2012] Setting source spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sun Aug 26 18:14:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Aug 26 21:25:43 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:43 2012] Error reading totcts from fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sun Aug 26 21:25:44 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:49 2012] Source 3 has no response, skipping
[Sun Aug 26 21:25:50 2012] xmm0051590101/analysis//spectral/fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete