[Sat Aug 25 13:10:30 2012] Detection parameters:
  Position = (245.2, 334.9) = 9 23 10.18 -63 13 26.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2161.3 +/- 59.5
  Background counts = 82.0
  Rate = 0.06 +/- 0.002

[Sat Aug 25 13:10:32 2012] Off-axis axis estimate = 4.68'
[Sat Aug 25 13:17:33 2012] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 13:17:33 2012] Initial guess for spatial extent in simple fitting = 8.77"
[Sat Aug 25 13:17:33 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.987
[Sat Aug 25 13:17:33 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.77"
[Sat Aug 25 20:22:07 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src13.ximg exists
[Sat Aug 25 20:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src13.csv
[Sat Aug 25 20:22:07 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Aug 25 20:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src13.csv
[Sat Aug 25 20:22:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 20:22:09 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Aug 25 20:22:09 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Aug 25 20:22:09 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Aug 26 00:04:12 2012] Warning, spatial fit 13 centroid is now closest to src. 14
[Sun Aug 26 00:04:12 2012] Spatial fit model total counts = 1568.910000, observed total counts = 1569.000000
[Sun Aug 26 00:04:12 2012] Offset between fit and detection position for source 13 = 1.155414 pixels
[Sun Aug 26 00:04:12 2012] Warning, changing simple spatial fit ID from 13 to 42
[Sun Aug 26 00:04:12 2012] 1521.462000 total counts/ 1291.830000 bgd. counts: snr = 6.388953
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.155414 pixels
  Position = (245.0, 336.1) = 9 23 10.29 -63 13 21.2
  Extent = 6.0 (5.3-7.2)", rotation angle = 0
  Source counts = 229.6 +/- 39.0
  Background counts = 1291.8
  Rate = 0.004 +/- 0.0007
[Sun Aug 26 00:04:13 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:13 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:13 2012] Source does appear to be extended
[Sun Aug 26 00:04:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:04:13 2012] Source is confused with source 14
[Sun Aug 26 00:04:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 00:04:49 2012] Initial guess for spatial extent in simple fitting = 6.04"
[Sun Aug 26 00:04:49 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.122
[Sun Aug 26 00:04:49 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.04"
[Sun Aug 26 08:50:25 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src11.ximg exists
[Sun Aug 26 08:50:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src11.csv
[Sun Aug 26 08:50:25 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Aug 26 08:50:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src11.csv
[Sun Aug 26 08:50:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Aug 26 08:50:26 2012] fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Aug 26 08:50:26 2012] Fit fullrun_pn_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Aug 26 17:58:41 2012] Warning, spatial fit 11 centroid is now closest to src. 14
[Sun Aug 26 17:58:41 2012] Spatial fit model total counts = 1567.790000, observed total counts = 1569.000000
[Sun Aug 26 17:58:41 2012] Offset between fit and detection position for source 13 = 0.110253 pixels
[Sun Aug 26 17:58:41 2012] Warning, changing simple spatial fit ID from 11 to 34
[Sun Aug 26 17:58:41 2012] 1522.878000 total counts/ 1280.420000 bgd. counts: snr = 6.775796
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.110253 pixels
  Position = (245.0, 336.0) = 9 23 10.29 -63 13 21.6
  Extent = 17.5 (10.2-34.9)" x 5.4 (4.4-6.3)", rotation angle = 52 (42-67) degrees
  Source counts = 242.5 +/- 39.0
  Background counts = 1280.4
  Rate = 0.004 +/- 0.0007
[Sun Aug 26 17:58:41 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:41 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:41 2012] Source does appear to be extended
[Sun Aug 26 17:58:41 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.63
[Sun Aug 26 17:58:41 2012] Source is asymmetric
[Sun Aug 26 17:59:08 2012] XMMSAS src. selection expression = ellipse(21264.420000, 29181.420000, 1047.120030, 326.743809, 52.356000, X, Y)
[Sun Aug 26 17:59:08 2012] Writing source region out to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src13_src.reg
[Sun Aug 26 17:59:08 2012] Extracting stamp from image fullrun_pn_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (185, 276) - (305, 396)
[Sun Aug 26 17:59:08 2012] XMMSAS bgd. selection expression = annulus(21264.420000, 29181.420000, 1745.200050, 3490.400100, X, Y) && !ellipse(26046.306580, 23984.654000, 1802.834452, 1802.834452, 0.000000, X, Y) && !ellipse(17347.609150, 33373.250910, 1727.880050, 848.296515, 61.403393, X, Y) && !ellipse(18738.045242, 31791.407837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19145.610000, 31316.108000, 1588.792046, 1588.792046, 0.000000, X, Y) && !ellipse(19522.608000, 31012.904000, 1615.192046, 1615.192046, 0.000000, X, Y) && !ellipse(19732.155800, 30724.907400, 2050.192059, 426.462412, 46.856000, X, Y) && !ellipse(20633.892000, 29813.116000, 1504.504043, 1504.504043, 0.000000, X, Y) && !ellipse(20460.058000, 29940.865600, 2263.232065, 430.616812, 46.791000, X, Y) && !ellipse(21574.250000, 28787.340000, 966.320028, 966.320028, 0.000000, X, Y) && !ellipse(21999.832785, 28472.209535, 1635.856047, 722.281004, 45.764220, X, Y) && !ellipse(22395.406000, 27834.272000, 1977.712057, 1977.712057, 0.000000, X, Y) && !ellipse(23535.886000, 26655.508000, 1159.568033, 1159.568033, 0.000000, X, Y) && !ellipse(22007.701874, 29805.390167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19174.792252, 28994.238892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23204.235200, 28578.378400, 362.732810, 362.732810, 0.000000, X, Y)
[Sun Aug 26 17:59:08 2012] Writing fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src13.gif
[Sun Aug 26 19:07:07 2012] Mean detx,y = (163.56, 7021.44) 
[Sun Aug 26 19:07:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 19:08:17 2012] grppha failed
[Sun Aug 26 19:08:17 2012] Setting source spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src13_src.pi.gz
[Sun Aug 26 19:08:17 2012] Setting bgd. spectrum file to fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Aug 26 21:25:43 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:43 2012] Error reading totcts from fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src13_src.pi.gz
[Sun Aug 26 21:25:44 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:49 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Sun Aug 26 21:25:49 2012] Source 13 has no response, skipping
[Sun Aug 26 21:25:50 2012] xmm0051590101/analysis//spectral/fullrun_pn_xmm0051590101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete