[Sat Aug 25 13:11:46 2012] Detection parameters:
  Position = (332.3, 240.8) = 9 22 14.00 -63 20 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.1 +/- 13.5
  Background counts = 30.0
  Rate = 0.002 +/- 0.0003

[Sat Aug 25 13:11:46 2012] Off-axis axis estimate = 4.84'
[Sat Aug 25 22:00:45 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 22:00:45 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Sat Aug 25 22:00:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Sat Aug 25 22:00:45 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 8.85"
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src41.ximg exists
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src41_1.ximg exists
[Sun Aug 26 00:03:49 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src41 appears to have run properly
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Sun Aug 26 00:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Sun Aug 26 00:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Sun Aug 26 00:03:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 00:04:34 2012] Warning, spatial fit 41 centroid is now closest to src. 57
[Sun Aug 26 00:04:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:34 2012] Assessing source extent using major
[Sun Aug 26 00:04:34 2012] Source does appear to be extended
[Sun Aug 26 00:04:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 09:39:13 2012] Using EEF radius (= 8.85 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 09:39:13 2012] Initial guess for spatial extent in simple fitting = 8.85"
[Sun Aug 26 09:39:13 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.973
[Sun Aug 26 09:39:13 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 8.85"
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src35.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src35.csv
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src35.csv
[Sun Aug 26 17:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:25 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun Aug 26 17:58:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Aug 26 17:58:25 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun Aug 26 17:58:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src35.csv
[Sun Aug 26 17:58:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:54 2012] Spatial fit model total counts = 483.007000, observed total counts = 416.000000
[Sun Aug 26 17:58:54 2012] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 26 17:58:54 2012] Warning, spatial fit 35 centroid is now closest to src. 59
[Sun Aug 26 17:58:54 2012] Spatial fit model total counts = 1845.230000, observed total counts = 1692.000000
[Sun Aug 26 17:58:54 2012] Offset between fit and detection position for source 56 = 0.633557 pixels
[Sun Aug 26 17:58:54 2012] Warning, changing simple spatial fit ID from 35 to 38
[Sun Aug 26 17:58:54 2012] 1845.627000 total counts/ 981.220000 bgd. counts: snr = 27.595297
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.633557 pixels
  Position = (332.5, 241.4) = 9 22 13.86 -63 20 13.0
  Extent = 34.4 (34.3-68.7)", rotation angle = 0
  Source counts = 864.4 +/- 43.0
  Background counts = 981.2
  Rate = 0.01 +/- 0.0007
[Sun Aug 26 17:58:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:54 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:54 2012] Source does appear to be extended
[Sun Aug 26 17:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 17:58:54 2012] Source is confused with source 55
[Sun Aug 26 21:00:28 2012] XMMSAS src. selection expression = ellipse(28879.550000, 20956.556000, 2061.984059, 2061.984059, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing source region out to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src56_src.reg
[Sun Aug 26 21:00:28 2012] Extracting stamp from image fullrun_mos2_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (214, 123) - (451, 360)
[Sun Aug 26 21:00:28 2012] XMMSAS bgd. selection expression = annulus(28879.550000, 20956.556000, 3436.640099, 6873.280198, X, Y) && !ellipse(26031.226000, 23979.580000, 1940.704856, 1940.704856, 0.000000, X, Y) && !ellipse(25286.455963, 23505.252563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.087250, 24284.108063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32672.227081, 27512.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.139038, 25254.537201, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(36061.249847, 21068.850327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.806885, 22531.807312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27513.149384, 15702.320587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.750260, 26776.826600, 287.708008, 287.708008, 0.000000, X, Y) && !ellipse(30152.262420, 26682.869600, 385.798411, 385.798411, 0.000000, X, Y) && !ellipse(32344.338928, 24341.310669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.678000, 25482.384000, 1166.160034, 1166.160034, 0.000000, X, Y) && !ellipse(28057.462000, 23484.339200, 1575.280045, 205.823206, 12.944000, X, Y) && !ellipse(22766.071167, 27527.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26874.256000, 26925.654000, 1234.120036, 1234.120036, 0.000000, X, Y) && !ellipse(28019.480000, 21935.026000, 1374.656040, 1374.656040, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src56.gif
[Sun Aug 26 21:21:58 2012] Mean detx,y = (-33.23, 3750.76) 
[Sun Aug 26 21:21:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:23:35 2012] grppha failed
[Sun Aug 26 21:23:35 2012] Setting source spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src56_src.pi.gz
[Sun Aug 26 21:23:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Sun Aug 26 21:25:45 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:45 2012] Error reading totcts from fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src56_src.pi.gz
[Sun Aug 26 21:25:45 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:48 2012] Flag p found in src. 56 procflags, skipping spectral fitting
[Sun Aug 26 21:25:48 2012] Flag c found in src. 56 procflags, skipping spectral fitting
[Sun Aug 26 21:25:48 2012] Source 56 has no response, skipping
[Sun Aug 26 21:25:49 2012] xmm0051590101/analysis//spectral/fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete