[Sat Aug 25 13:11:45 2012] Detection parameters:
  Position = (327.4, 246.3) = 9 22 17.14 -63 19 52.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49.0 +/- 12.0
  Background counts = 33.7
  Rate = 0.001 +/- 0.0002

[Sat Aug 25 13:11:46 2012] Off-axis axis estimate = 4.33'
[Sat Aug 25 22:00:45 2012] Using EEF radius (= 8.59 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 22:00:45 2012] Initial guess for spatial extent in simple fitting = 8.59"
[Sat Aug 25 22:00:45 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.020
[Sat Aug 25 22:00:45 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 8.59"
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src62.ximg exists
[Sun Aug 26 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src62.csv
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src62_1.ximg exists
[Sun Aug 26 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src62.csv
[Sun Aug 26 00:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 00:03:51 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Sun Aug 26 00:03:51 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Sun Aug 26 00:03:51 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Sun Aug 26 00:04:34 2012] Spatial fit model total counts = 557.986000, observed total counts = 511.000000
[Sun Aug 26 00:04:34 2012] Offset between fit and detection position for source 55 = 8.007532 pixels
[Sun Aug 26 00:04:34 2012] 542.577000 total counts/ 291.003000 bgd. counts: snr = 14.747453
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 8.007532 pixels
  Position = (322.6, 252.7) = 9 22 20.26 -63 19 24.2
  Extent = 17.2 (17.1-34.4)", rotation angle = 0
  Source counts = 251.6 +/- 23.3
  Background counts = 291.0
  Rate = 0.004 +/- 0.0004
[Sun Aug 26 00:04:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:34 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:34 2012] Source does appear to be extended
[Sun Aug 26 00:04:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 09:39:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 09:39:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 26 09:39:13 2012] Initial guess for spatial extent in simple fitting = 17.18"
[Sun Aug 26 09:39:13 2012] source mask rpix=4.0, npix_max = 79, mask sum = 75, frac = 0.947
[Sun Aug 26 09:39:13 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 17.18"
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src38.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src38.csv
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src38_1.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src38.csv
[Sun Aug 26 17:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:25 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Sun Aug 26 17:58:25 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Sun Aug 26 17:58:25 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Sun Aug 26 17:58:54 2012] Warning, spatial fit 38 centroid is now closest to src. 56
[Sun Aug 26 17:58:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:54 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:54 2012] Source does appear to be extended
[Sun Aug 26 17:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 17:58:54 2012] Source is confused with source 56
[Sun Aug 26 21:00:28 2012] XMMSAS src. selection expression = ellipse(28019.480000, 21935.026000, 1030.992030, 1030.992030, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing source region out to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src55_src.reg
[Sun Aug 26 21:00:28 2012] Extracting stamp from image fullrun_mos2_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (263, 193) - (382, 312)
[Sun Aug 26 21:00:28 2012] XMMSAS bgd. selection expression = annulus(28019.480000, 21935.026000, 1718.320049, 3436.640099, X, Y) && !ellipse(26031.226000, 23979.580000, 1940.704856, 1940.704856, 0.000000, X, Y) && !ellipse(25286.455963, 23505.252563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.087250, 24284.108063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.139038, 25254.537201, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(26294.806885, 22531.807312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.678000, 25482.384000, 1166.160034, 1166.160034, 0.000000, X, Y) && !ellipse(28057.462000, 23484.339200, 1575.280045, 205.823206, 12.944000, X, Y) && !ellipse(28879.550000, 20956.556000, 2749.312079, 2749.312079, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src55.gif
[Sun Aug 26 21:23:58 2012] Mean detx,y = (72.76, 2503.23) 
[Sun Aug 26 21:23:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:24:12 2012] grppha failed
[Sun Aug 26 21:24:13 2012] Setting source spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src55_src.pi.gz
[Sun Aug 26 21:24:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Sun Aug 26 21:25:45 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:45 2012] Error reading totcts from fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src55_src.pi.gz
[Sun Aug 26 21:25:45 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:48 2012] Flag c found in src. 55 procflags, skipping spectral fitting
[Sun Aug 26 21:25:48 2012] Source 55 has no response, skipping
[Sun Aug 26 21:25:49 2012] xmm0051590101/analysis//spectral/fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete