[Sat Aug 25 13:11:45 2012] Detection parameters:
  Position = (347.3, 307.1) = 9 22 4.39 -63 15 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.9 +/- 15.8
  Background counts = 29.6
  Rate = 0.003 +/- 0.0003

[Sat Aug 25 13:11:46 2012] Off-axis axis estimate = 3.60'
[Sat Aug 25 22:00:45 2012] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 22:00:45 2012] Initial guess for spatial extent in simple fitting = 8.23"
[Sat Aug 25 22:00:45 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.093
[Sat Aug 25 22:00:45 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 8.23"
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src16.ximg exists
[Sun Aug 26 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src16.csv
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun Aug 26 00:03:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src16.csv
[Sun Aug 26 00:03:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun Aug 26 00:03:50 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun Aug 26 00:04:34 2012] Spatial fit model total counts = 413.726000, observed total counts = 414.000000
[Sun Aug 26 00:04:34 2012] Offset between fit and detection position for source 47 = 0.209128 pixels
[Sun Aug 26 00:04:34 2012] 403.762200 total counts/ 319.424000 bgd. counts: snr = 4.718898
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.209128 pixels
  Position = (347.1, 307.3) = 9 22 4.50 -63 15 26.6
  Extent = 4.8 (3.8-6.3)", rotation angle = 0
  Source counts = 84.3 +/- 20.1
  Background counts = 319.4
  Rate = 0.001 +/- 0.0003
[Sun Aug 26 00:04:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:34 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:34 2012] Source does appear to be extended
[Sun Aug 26 00:04:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 09:39:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 09:39:13 2012] Initial guess for spatial extent in simple fitting = 4.82"
[Sun Aug 26 09:39:13 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.870
[Sun Aug 26 09:39:13 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 4.82"
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src16.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src16.csv
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src16.csv
[Sun Aug 26 17:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun Aug 26 17:58:24 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun Aug 26 17:58:54 2012] Warning, spatial fit 16 centroid is now closest to src. 13
[Sun Aug 26 17:58:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:54 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:54 2012] Source does appear to be extended
[Sun Aug 26 17:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:00:28 2012] XMMSAS src. selection expression = ellipse(30152.262420, 26682.869600, 289.348808, 289.348808, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing source region out to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src47_src.reg
[Sun Aug 26 21:00:28 2012] Extracting stamp from image fullrun_mos2_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (331, 291) - (364, 324)
[Sun Aug 26 21:00:28 2012] XMMSAS bgd. selection expression = annulus(30152.262420, 26682.869600, 482.248014, 964.496028, X, Y) && !ellipse(25908.139038, 25254.537201, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(28367.678000, 25482.384000, 1166.160034, 1166.160034, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src47.gif
[Sun Aug 26 21:17:34 2012] Mean detx,y = (4823.23, 679.65) 
[Sun Aug 26 21:17:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:17:46 2012] grppha failed
[Sun Aug 26 21:17:46 2012] Setting source spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src47_src.pi.gz
[Sun Aug 26 21:17:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sun Aug 26 21:24:18 2012] Not generating rmf since there are only 84 counts
[Sun Aug 26 21:24:18 2012] rmf not generated due to insufficient counts
[Sun Aug 26 21:25:45 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:45 2012] Error reading totcts from fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src47_src.pi.gz
[Sun Aug 26 21:25:45 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:48 2012] Source 47 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Aug 26 21:25:49 2012] xmm0051590101/analysis//spectral/fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src47_pl.csv not found, spectral fit skipped or did not complete