[Sat Aug 25 13:11:45 2012] Detection parameters:
  Position = (228.4, 455.1) = 9 23 20.74 -63 4 40.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 147.5 +/- 16.1
  Background counts = 13.0
  Rate = 0.002 +/- 0.0003

[Sat Aug 25 13:11:46 2012] Off-axis axis estimate = 12.44'
[Sat Aug 25 22:00:45 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 22:00:45 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Sat Aug 25 22:00:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055
[Sat Aug 25 22:00:45 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 12.65"
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src21.ximg exists
[Sun Aug 26 00:03:49 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun Aug 26 00:03:49 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src21 appears to have run properly
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun Aug 26 00:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun Aug 26 00:03:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun Aug 26 00:03:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 00:04:34 2012] Warning, spatial fit 21 centroid is now closest to src. 30
[Sun Aug 26 00:04:34 2012] Warning: source 54 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 15.462533 pixels away
[Sun Aug 26 00:04:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:34 2012] Assessing source extent using major
[Sun Aug 26 00:04:34 2012] Source does appear to be extended
[Sun Aug 26 00:04:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 09:39:13 2012] Using EEF radius (= 12.65 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 09:39:13 2012] Initial guess for spatial extent in simple fitting = 12.65"
[Sun Aug 26 09:39:13 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.055
[Sun Aug 26 09:39:13 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 12.65"
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src21.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src21.csv
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src21.csv
[Sun Aug 26 17:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Aug 26 17:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:54 2012] Source 29 is offset by 1.567345 and 8.426887 pixels which is larger than
2 X fitted extent = 1.315030 x 1.315030, not incorporating fit results
[Sun Aug 26 17:58:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:54 2012] Assessing source extent using major
[Sun Aug 26 17:58:54 2012] Source does appear to be extended
[Sun Aug 26 17:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:00:28 2012] XMMSAS src. selection expression = ellipse(19821.670227, 39547.035156, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing source region out to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src29_src.reg
[Sun Aug 26 21:00:28 2012] Extracting stamp from image fullrun_mos2_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (191, 418) - (266, 493)
[Sun Aug 26 21:00:28 2012] XMMSAS bgd. selection expression = annulus(19821.670227, 39547.035156, 1087.500000, 2175.000000, X, Y) && !ellipse(21932.754379, 37266.322510, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 26 21:00:28 2012] Writing fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src29.gif
[Sun Aug 26 21:19:14 2012] Mean detx,y = (5900.60, -15745.48) 
[Sun Aug 26 21:19:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:19:36 2012] grppha failed
[Sun Aug 26 21:19:36 2012] Setting source spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src29_src.pi.gz
[Sun Aug 26 21:19:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sun Aug 26 21:24:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 26 21:24:18 2012] rmf not generated due to insufficient counts
[Sun Aug 26 21:25:45 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:45 2012] Error reading totcts from fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src29_src.pi.gz
[Sun Aug 26 21:25:45 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:48 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Aug 26 21:25:49 2012] xmm0051590101/analysis//spectral/fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete