[Sat Aug 25 13:11:44 2012] Detection parameters:
  Position = (299.7, 276.1) = 9 22 35.05 -63 17 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 215976.7 +/- 551.2
  Background counts = 51.1
  Rate = 4 +/- 0.01

[Sat Aug 25 13:11:46 2012] Off-axis axis estimate = 1.62'
[Sat Aug 25 22:00:45 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 22:00:45 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sat Aug 25 22:00:45 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.854
[Sat Aug 25 22:00:45 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Aug 26 00:03:48 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 26 00:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 26 00:03:48 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 26 00:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 26 00:03:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 26 00:03:50 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 26 00:03:50 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 26 00:04:34 2012] Spatial fit model total counts = 207946.000000, observed total counts = 213569.000000
[Sun Aug 26 00:04:34 2012] Offset between fit and detection position for source 2 = 0.116788 pixels
[Sun Aug 26 00:04:34 2012] 208185.000000 total counts/ 25600.000000 bgd. counts: snr = 1141.156250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.116788 pixels
  Position = (299.8, 276.2) = 9 22 35.02 -63 17 42.0
  Extent = 8.1 (8.1-8.1)", rotation angle = 0
  Source counts = 182585.0 +/- 456.3
  Background counts = 25600.0
  Rate = 3 +/- 0.008
[Sun Aug 26 00:04:34 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:34 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:34 2012] Source does appear to be extended
[Sun Aug 26 00:04:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 00:04:34 2012] Source is confused with source 28
[Sun Aug 26 09:39:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 09:39:13 2012] Initial guess for spatial extent in simple fitting = 8.09"
[Sun Aug 26 09:39:13 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.122
[Sun Aug 26 09:39:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.09"
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src1.csv
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 26 17:58:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src1.csv
[Sun Aug 26 17:58:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 26 17:58:24 2012] fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 26 17:58:24 2012] Fit fullrun_mos2_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 26 17:58:54 2012] Spatial fit model total counts = 208011.000000, observed total counts = 213569.000000
[Sun Aug 26 17:58:54 2012] Offset between fit and detection position for source 2 = 0.000346 pixels
[Sun Aug 26 17:58:54 2012] 208253.000000 total counts/ 25600.000000 bgd. counts: snr = 1141.581250
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000346 pixels
  Position = (299.8, 276.2) = 9 22 35.02 -63 17 42.0
  Extent = 8.1 (8.1-8.1)", rotation angle = 0
  Source counts = 182653.0 +/- 456.3
  Background counts = 25600.0
  Rate = 3 +/- 0.008
[Sun Aug 26 17:58:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:54 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:54 2012] Source does appear to be extended
[Sun Aug 26 17:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 21:00:27 2012] Counts = 182653.000000, rescaling region sizes by 3.000000
[Sun Aug 26 21:00:27 2012] XMMSAS src. selection expression = ellipse(26031.226000, 23979.580000, 1455.528642, 1455.528642, 0.000000, X, Y)
[Sun Aug 26 21:00:27 2012] Writing source region out to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 26 21:00:27 2012] Extracting stamp from image fullrun_mos2_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (216, 193) - (383, 360)
[Sun Aug 26 21:00:27 2012] XMMSAS bgd. selection expression = annulus(26031.226000, 23979.580000, 7277.643209, 14555.286419, X, Y) && !ellipse(25286.455963, 23505.252563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24610.087250, 24284.108063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32672.227081, 27512.772369, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.139038, 25254.537201, 3480.000000, 3480.000000, 0.000000, X, Y) && !ellipse(36061.249847, 21068.850327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26294.806885, 22531.807312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23303.379400, 35239.458600, 471.669614, 471.669614, 0.000000, X, Y) && !ellipse(15082.830566, 22122.437637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40386.773132, 26223.498108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31955.231110, 10295.545914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27513.149384, 15702.320587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28309.750260, 26776.826600, 287.708008, 287.708008, 0.000000, X, Y) && !ellipse(19530.072342, 20902.610977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30152.262420, 26682.869600, 385.798411, 385.798411, 0.000000, X, Y) && !ellipse(21930.816208, 29813.676514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32344.338928, 24341.310669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38260.357513, 20751.371216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21932.754379, 37266.322510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28367.678000, 25482.384000, 1166.160034, 1166.160034, 0.000000, X, Y) && !ellipse(11308.673233, 23879.882507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38155.056396, 14836.227463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28057.462000, 23484.339200, 1575.280045, 205.823206, 12.944000, X, Y) && !ellipse(24397.875836, 9249.295000, 750.420022, 750.420022, 0.000000, X, Y) && !ellipse(20144.763397, 15034.513016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22766.071167, 27527.523712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28879.550000, 20956.556000, 2749.312079, 2749.312079, 0.000000, X, Y) && !ellipse(26874.256000, 26925.654000, 1234.120036, 1234.120036, 0.000000, X, Y) && !ellipse(28019.480000, 21935.026000, 1374.656040, 1374.656040, 0.000000, X, Y)
[Sun Aug 26 21:00:27 2012] Writing fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src2.gif
[Sun Aug 26 21:00:46 2012] Mean detx,y = (-21.42, -138.00) 
[Sun Aug 26 21:00:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 21:06:58 2012] grppha failed
[Sun Aug 26 21:06:59 2012] Setting source spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Aug 26 21:06:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 26 21:25:45 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:45 2012] Error reading totcts from fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src2_src.pi.gz
[Sun Aug 26 21:25:45 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:48 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sun Aug 26 21:25:48 2012] Source 2 has no response, skipping
[Sun Aug 26 21:25:49 2012] xmm0051590101/analysis//spectral/fullrun_mos2_xmm0051590101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete