[Sat Aug 25 13:11:05 2012] Detection parameters:
  Position = (299.9, 276.0) = 9 22 34.94 -63 17 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225014.6 +/- 546.6
  Background counts = 47.6
  Rate = 4 +/- 0.009

[Sat Aug 25 13:11:06 2012] Off-axis axis estimate = 1.63'
[Sat Aug 25 20:22:10 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sat Aug 25 20:22:10 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sat Aug 25 20:22:10 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sat Aug 25 20:22:10 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sat Aug 25 22:00:43 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug 25 22:00:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 25 22:00:43 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug 25 22:00:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_src1.csv
[Sat Aug 25 22:00:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 22:00:44 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug 25 22:00:44 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug 25 22:00:44 2012] Fit fullrun_mos1_xmm0051590101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 26 00:04:23 2012] Spatial fit model total counts = 210994.000000, observed total counts = 219562.000000
[Sun Aug 26 00:04:23 2012] Offset between fit and detection position for source 1 = 0.056545 pixels
[Sun Aug 26 00:04:23 2012] 210833.000000 total counts/ 25600.000000 bgd. counts: snr = 1157.706250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.056545 pixels
  Position = (299.8, 276.1) = 9 22 34.97 -63 17 42.5
  Extent = 8.2 (8.1-8.2)", rotation angle = 0
  Source counts = 185233.0 +/- 459.2
  Background counts = 25600.0
  Rate = 3 +/- 0.008
[Sun Aug 26 00:04:24 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 00:04:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 00:04:24 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 00:04:24 2012] Source does appear to be extended
[Sun Aug 26 00:04:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 08:50:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 26 08:50:28 2012] Initial guess for spatial extent in simple fitting = 8.17"
[Sun Aug 26 08:50:28 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.883
[Sun Aug 26 08:50:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.17"
[Sun Aug 26 09:39:12 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 26 09:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_src1.csv
[Sun Aug 26 09:39:12 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 26 09:39:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_src1.csv
[Sun Aug 26 09:39:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 26 09:39:12 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 26 09:39:12 2012] fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 26 09:39:12 2012] Fit fullrun_mos1_xmm0051590101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 26 17:58:47 2012] Spatial fit model total counts = 211038.000000, observed total counts = 219562.000000
[Sun Aug 26 17:58:47 2012] Offset between fit and detection position for source 1 = 0.001266 pixels
[Sun Aug 26 17:58:47 2012] 210878.000000 total counts/ 25600.000000 bgd. counts: snr = 1157.987500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001266 pixels
  Position = (299.8, 276.1) = 9 22 34.97 -63 17 42.6
  Extent = 8.2 (8.1-8.2)", rotation angle = 0
  Source counts = 185278.0 +/- 459.2
  Background counts = 25600.0
  Rate = 3 +/- 0.008
[Sun Aug 26 17:58:47 2012] Vigneting correction estimate = 1.000000
[Sun Aug 26 17:58:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 26 17:58:47 2012] Assessing source extent using major axis lower bound
[Sun Aug 26 17:58:47 2012] Source does appear to be extended
[Sun Aug 26 17:58:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 26 20:47:54 2012] Counts = 185278.000000, rescaling region sizes by 3.000000
[Sun Aug 26 20:47:54 2012] XMMSAS src. selection expression = ellipse(26037.936660, 23968.440200, 1471.654842, 1471.654842, 0.000000, X, Y)
[Sun Aug 26 20:47:54 2012] Writing source region out to fullrun_mos1_xmm0051590101_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug 26 20:47:54 2012] Extracting stamp from image fullrun_mos1_xmm0051590101_pi300-10000_cl_sm2.00.img.gz, (215, 191) - (384, 361)
[Sun Aug 26 20:47:54 2012] XMMSAS bgd. selection expression = annulus(26037.936660, 23968.440200, 7358.274212, 14716.548423, X, Y) && !ellipse(36035.355347, 21027.660202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32691.308777, 27457.112335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40359.715729, 26232.997803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15091.386026, 22103.406600, 488.809614, 488.809614, 0.000000, X, Y) && !ellipse(31973.200348, 10284.552101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27517.019200, 15668.168000, 461.367213, 461.367213, 0.000000, X, Y) && !ellipse(28310.292800, 26739.612000, 394.164011, 394.164011, 0.000000, X, Y) && !ellipse(23771.848000, 22445.450000, 1253.304036, 1253.304036, 0.000000, X, Y) && !ellipse(19541.122574, 20872.322403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32318.820220, 24333.333600, 408.908812, 408.908812, 0.000000, X, Y) && !ellipse(23289.743835, 35268.285522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30226.759247, 14928.781784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21873.020203, 37285.146667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27515.807068, 22708.523407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30148.929718, 26665.669342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27169.052277, 22215.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38151.067140, 14859.059600, 572.896016, 572.896016, 0.000000, X, Y) && !ellipse(19686.000885, 39529.060608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38224.185394, 20593.649200, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15854.100647, 14851.524414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11324.765366, 23801.136993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20695.846588, 37258.572479, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29736.726000, 27286.070100, 1286.032037, 1286.032037, 0.000000, X, Y)
[Sun Aug 26 20:47:54 2012] Writing fullrun_mos1_xmm0051590101_pi300-10000_pass1_cl_src1.gif
[Sun Aug 26 20:48:11 2012] Mean detx,y = (100.16, -129.72) 
[Sun Aug 26 20:48:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 26 20:52:11 2012] grppha failed
[Sun Aug 26 20:52:11 2012] Setting source spectrum file to fullrun_mos1_xmm0051590101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Aug 26 20:52:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0051590101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug 26 21:25:44 2012] Updating aperture counts using extracted products
[Sun Aug 26 21:25:44 2012] Error reading totcts from fullrun_mos1_xmm0051590101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Aug 26 21:25:45 2012] No arf file for this source, not re-computing flux
[Sun Aug 26 21:25:47 2012] Source 1 has no response, skipping
[Sun Aug 26 21:25:48 2012] xmm0051590101/analysis//spectral/fullrun_mos1_xmm0051590101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete