[Thu Aug  9 10:29:28 2012] Detection parameters:
  Position = (287.1, 278.1) = 5 25 6.07 -33 43 5.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3621.5 +/- 72.2
  Background counts = 24.2
  Rate = 0.1 +/- 0.003

[Thu Aug  9 10:29:29 2012] Off-axis axis estimate = 1.69'
[Thu Aug  9 12:03:33 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 12:03:33 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Aug  9 12:03:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Thu Aug  9 12:03:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Aug  9 12:34:13 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  9 12:34:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 12:34:13 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  9 12:34:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 12:34:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 12:34:13 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  9 12:34:13 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  9 12:34:13 2012] Fit fullrun_mos2_xmm0050150301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  9 12:34:34 2012] Spatial fit model total counts = 3086.760000, observed total counts = 3021.000000
[Thu Aug  9 12:34:34 2012] Offset between fit and detection position for source 1 = 0.078423 pixels
[Thu Aug  9 12:34:34 2012] 3085.461000 total counts/ 736.291000 bgd. counts: snr = 86.574442
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.078423 pixels
  Position = (287.1, 278.2) = 5 25 6.06 -33 43 5.5
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2349.2 +/- 55.5
  Background counts = 736.3
  Rate = 0.09 +/- 0.002
[Thu Aug  9 12:34:34 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 12:34:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 12:34:34 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 12:34:34 2012] Source does appear to be extended
[Thu Aug  9 12:34:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 13:52:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 13:52:54 2012] Initial guess for spatial extent in simple fitting = 5.37"
[Thu Aug  9 13:52:54 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.328
[Thu Aug  9 13:52:54 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.37"
[Thu Aug  9 14:21:45 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  9 14:21:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 14:21:45 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  9 14:21:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 14:21:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 14:21:46 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  9 14:21:46 2012] fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  9 14:21:46 2012] Fit fullrun_mos2_xmm0050150301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  9 14:22:04 2012] Spatial fit model total counts = 3088.550000, observed total counts = 3021.000000
[Thu Aug  9 14:22:04 2012] Offset between fit and detection position for source 1 = 0.006135 pixels
[Thu Aug  9 14:22:04 2012] 3087.261000 total counts/ 735.421000 bgd. counts: snr = 86.724092
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.006135 pixels
  Position = (287.1, 278.2) = 5 25 6.06 -33 43 5.5
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2351.8 +/- 55.6
  Background counts = 735.4
  Rate = 0.09 +/- 0.002
[Thu Aug  9 14:22:04 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 14:22:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 14:22:04 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 14:22:04 2012] Source does appear to be extended
[Thu Aug  9 14:22:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 15:18:41 2012] Counts = 2351.840000, rescaling region sizes by 2.000000
[Thu Aug  9 15:18:41 2012] XMMSAS src. selection expression = ellipse(24929.352160, 24156.168200, 645.687619, 645.687619, 0.000000, X, Y)
[Thu Aug  9 15:18:41 2012] Writing source region out to fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  9 15:18:41 2012] Extracting stamp from image fullrun_mos2_xmm0050150301_pi300-10000_cl_sm2.00.img.gz, (250, 241) - (324, 315)
[Thu Aug  9 15:18:41 2012] XMMSAS bgd. selection expression = annulus(24929.352160, 24156.168200, 2152.292062, 4304.584124, X, Y) && !ellipse(25083.757500, 26755.285800, 396.836011, 396.836011, 0.000000, X, Y) && !ellipse(20863.876755, 25507.442017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26287.671000, 25170.632280, 331.689610, 331.689610, 0.000000, X, Y)
[Thu Aug  9 15:18:41 2012] Writing fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1.gif
[Thu Aug  9 15:18:46 2012] Mean detx,y = (195.82, 123.41) 
[Thu Aug  9 15:18:48 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 15:19:03 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 15:19:03 2012] Setting source spectrum file to fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 15:19:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  9 15:38:01 2012] Updating aperture counts using extracted products
[Thu Aug  9 15:38:01 2012] Error reading totcts from fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 15:38:02 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 15:38:02 2012] Using photon index=1.80, rate=0.0926, arf fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 15:38:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 15:38:02 2012] Updating source flux to 9.8e-13
[Thu Aug  9 15:39:05 2012] Reading fit data from xmm0050150301/analysis//spectral/fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  9 15:39:05 2012] Spectral fit parameter nH value = 4.2821e+20
[Thu Aug  9 15:39:05 2012] Spectral fit parameter PhoIndex value = 1.59593
[Thu Aug  9 15:39:05 2012] Failed to get F(0.3-8.0) from xmm0050150301/analysis//spectral/fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 15:39:05 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 15:39:05 2012] Using Nh = 4.3e+20, photon index=1.60, rate=0.0926, arf fullrun_mos2_xmm0050150301_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 15:39:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 15:39:05 2012] Updating source flux to 1.1e-12