[Thu Aug  9 10:28:48 2012] Detection parameters:
  Position = (287.1, 278.1) = 5 25 6.07 -33 43 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3646.0 +/- 73.3
  Background counts = 23.8
  Rate = 0.1 +/- 0.003

[Thu Aug  9 10:28:49 2012] Off-axis axis estimate = 1.69'
[Thu Aug  9 11:25:06 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Thu Aug  9 11:25:06 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Thu Aug  9 11:25:06 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Thu Aug  9 11:25:06 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Thu Aug  9 12:03:32 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_src1.ximg exists
[Thu Aug  9 12:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 12:03:32 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Aug  9 12:03:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_src1.csv
[Thu Aug  9 12:03:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 12:03:32 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Aug  9 12:03:32 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Aug  9 12:03:32 2012] Fit fullrun_mos1_xmm0050150301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Aug  9 12:34:29 2012] Spatial fit model total counts = 3002.690000, observed total counts = 3003.000000
[Thu Aug  9 12:34:29 2012] Offset between fit and detection position for source 1 = 0.103472 pixels
[Thu Aug  9 12:34:29 2012] 3011.188000 total counts/ 725.948000 bgd. counts: snr = 84.816249
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.103472 pixels
  Position = (287.1, 278.2) = 5 25 6.05 -33 43 5.4
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2285.2 +/- 54.9
  Background counts = 725.9
  Rate = 0.09 +/- 0.002
[Thu Aug  9 12:34:29 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 12:34:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 12:34:29 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 12:34:29 2012] Source does appear to be extended
[Thu Aug  9 12:34:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 13:18:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  9 13:18:47 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Thu Aug  9 13:18:47 2012] source mask rpix=1.2, npix_max = 12, mask sum = 16, frac = 1.321
[Thu Aug  9 13:18:47 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Thu Aug  9 13:52:54 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Aug  9 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 13:52:54 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Aug  9 13:52:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_src1.csv
[Thu Aug  9 13:52:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  9 13:52:54 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Aug  9 13:52:54 2012] fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Aug  9 13:52:54 2012] Fit fullrun_mos1_xmm0050150301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Aug  9 14:21:59 2012] Spatial fit model total counts = 3002.540000, observed total counts = 3003.000000
[Thu Aug  9 14:21:59 2012] Offset between fit and detection position for source 1 = 0.000065 pixels
[Thu Aug  9 14:21:59 2012] 3011.040000 total counts/ 725.890000 bgd. counts: snr = 84.816297
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000065 pixels
  Position = (287.1, 278.2) = 5 25 6.05 -33 43 5.4
  Extent = 5.4 (5.2-5.6)", rotation angle = 0
  Source counts = 2285.2 +/- 54.9
  Background counts = 725.9
  Rate = 0.09 +/- 0.002
[Thu Aug  9 14:21:59 2012] Vigneting correction estimate = 1.000000
[Thu Aug  9 14:21:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  9 14:21:59 2012] Assessing source extent using major axis lower bound
[Thu Aug  9 14:21:59 2012] Source does appear to be extended
[Thu Aug  9 14:21:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  9 14:58:43 2012] Counts = 2285.150000, rescaling region sizes by 2.000000
[Thu Aug  9 14:58:43 2012] XMMSAS src. selection expression = ellipse(24932.156240, 24157.336400, 647.305219, 647.305219, 0.000000, X, Y)
[Thu Aug  9 14:58:43 2012] Writing source region out to fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1_src.reg
[Thu Aug  9 14:58:43 2012] Extracting stamp from image fullrun_mos1_xmm0050150301_pi300-10000_cl_sm2.00.img.gz, (250, 241) - (324, 315)
[Thu Aug  9 14:58:43 2012] XMMSAS bgd. selection expression = annulus(24932.156240, 24157.336400, 2157.684062, 4315.368124, X, Y) && !ellipse(25088.090580, 26729.474160, 421.911048, 421.911048, 0.000000, X, Y) && !ellipse(20873.041400, 25370.282200, 356.108632, 356.108632, 0.000000, X, Y)
[Thu Aug  9 14:58:43 2012] Writing fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1.gif
[Thu Aug  9 14:58:47 2012] Mean detx,y = (336.65, -361.47) 
[Thu Aug  9 14:58:49 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  9 14:59:13 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  9 14:59:13 2012] Setting source spectrum file to fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 14:59:13 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Aug  9 15:38:00 2012] Updating aperture counts using extracted products
[Thu Aug  9 15:38:00 2012] Error reading totcts from fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Aug  9 15:38:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 15:38:01 2012] Using photon index=1.80, rate=0.0898, arf fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 15:38:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 15:38:01 2012] Updating source flux to 8.6e-13
[Thu Aug  9 15:38:31 2012] Reading fit data from xmm0050150301/analysis//spectral/fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Aug  9 15:38:31 2012] Spectral fit parameter nH value = 5.03333e+20
[Thu Aug  9 15:38:31 2012] Spectral fit parameter PhoIndex value = 1.68161
[Thu Aug  9 15:38:31 2012] Failed to get F(0.3-8.0) from xmm0050150301/analysis//spectral/fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Aug  9 15:38:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  9 15:38:31 2012] Using Nh = 5e+20, photon index=1.68, rate=0.0898, arf fullrun_mos1_xmm0050150301_pi300-10000_pass1_cl_src1.arf
[Thu Aug  9 15:38:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  9 15:38:31 2012] Updating source flux to 9.6e-13