[Fri Jul 27 09:52:20 2012] Detection parameters:
  Position = (214.0, 283.9) = 0 27 7.66 17 7 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1345.2 +/- 43.6
  Background counts = 40.0
  Rate = 0.03 +/- 0.0009

[Fri Jul 27 09:52:22 2012] Off-axis axis estimate = 6.21'
[Fri Jul 27 09:55:23 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 09:55:23 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Fri Jul 27 09:55:23 2012] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.759
[Fri Jul 27 09:55:23 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.53"
[Fri Jul 27 13:13:08 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jul 27 13:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src6.csv
[Fri Jul 27 13:13:08 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jul 27 13:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src6.csv
[Fri Jul 27 13:13:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 13:13:09 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jul 27 13:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jul 27 13:13:09 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jul 27 13:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jul 27 13:13:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:21:02 2012] Spatial fit model total counts = 1795.810000, observed total counts = 1371.000000
[Fri Jul 27 17:21:02 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 17:21:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:02 2012] Assessing source extent using major
[Fri Jul 27 17:21:02 2012] Source does appear to be extended
[Fri Jul 27 17:21:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:21:58 2012] Using EEF radius (= 9.53 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:21:58 2012] Initial guess for spatial extent in simple fitting = 9.53"
[Fri Jul 27 17:21:58 2012] source mask rpix=2.2, npix_max = 28, mask sum = 22, frac = 0.759
[Fri Jul 27 17:21:58 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.53"
[Fri Jul 27 19:40:20 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jul 27 19:40:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src6.csv
[Fri Jul 27 19:40:20 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jul 27 19:40:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src6.csv
[Fri Jul 27 19:40:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 19:40:21 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jul 27 19:40:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 27 19:40:21 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jul 27 19:40:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Fri Jul 27 19:40:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:34 2012] Spatial fit model total counts = 1785.390000, observed total counts = 1371.000000
[Fri Jul 27 22:39:34 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 22:39:35 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:35 2012] Assessing source extent using major
[Fri Jul 27 22:39:35 2012] Source does appear to be extended
[Fri Jul 27 22:39:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 22:40:10 2012] Counts = 1345.174194, rescaling region sizes by 2.000000
[Fri Jul 27 22:40:10 2012] XMMSAS src. selection expression = ellipse(18569.918167, 24649.721527, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul 27 22:40:10 2012] Writing source region out to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src6_src.reg
[Fri Jul 27 22:40:10 2012] Extracting stamp from image fullrun_pn_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (139, 209) - (289, 359)
[Fri Jul 27 22:40:10 2012] XMMSAS bgd. selection expression = annulus(18569.918167, 24649.721527, 4350.000000, 8700.000000, X, Y) && !ellipse(24809.543400, 30325.862000, 384.676011, 384.676011, 0.000000, X, Y) && !ellipse(11062.479668, 29689.591064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.991940, 26923.798200, 1111.992032, 1111.992032, 0.000000, X, Y) && !ellipse(11447.460907, 23619.891418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18634.902664, 22834.517822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12140.803223, 22063.782730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19191.787094, 34153.473236, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12932.217010, 31376.256836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25688.010600, 25519.933800, 332.846410, 332.846410, 0.000000, X, Y) && !ellipse(19598.661820, 24128.768800, 483.744814, 388.732011, 320.309000, X, Y) && !ellipse(14965.658813, 22199.237015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15725.644000, 20188.346400, 479.797614, 479.797614, 0.000000, X, Y) && !ellipse(25200.098480, 18313.718460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15976.874512, 16712.102570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.182770, 32994.027252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19325.053635, 32652.255951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23158.383606, 31710.033844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.977600, 31184.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24870.800507, 30918.136841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24757.975037, 27820.609741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19083.229584, 27389.916199, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26319.538483, 27166.856567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17642.113800, 26740.019800, 431.185612, 431.185612, 0.000000, X, Y) && !ellipse(21363.799780, 25838.981600, 445.713613, 445.713613, 0.000000, X, Y) && !ellipse(28201.034000, 25527.164000, 1213.328035, 1213.328035, 0.000000, X, Y) && !ellipse(25114.112701, 25165.227325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20509.262200, 24921.073200, 388.957611, 388.957611, 0.000000, X, Y) && !ellipse(27507.674000, 24392.000400, 523.358415, 523.358415, 0.000000, X, Y) && !ellipse(13227.038400, 24299.457320, 350.322410, 350.322410, 0.000000, X, Y) && !ellipse(25502.385400, 24105.093800, 328.024009, 328.024009, 0.000000, X, Y) && !ellipse(25005.338600, 24005.928600, 340.075210, 340.075210, 0.000000, X, Y) && !ellipse(17654.364502, 21709.080109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.834800, 19949.439160, 363.004010, 363.004010, 0.000000, X, Y) && !ellipse(26268.253937, 16587.026794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22741.241333, 16087.027695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19641.669861, 15115.719742, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 22:40:10 2012] Writing fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src6.gif
[Fri Jul 27 22:49:47 2012] Mean detx,y = (-7181.70, 5506.92) 
[Fri Jul 27 22:49:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 22:53:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 22:53:41 2012] Setting source spectrum file to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Jul 27 22:53:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sat Jul 28 02:03:45 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 02:03:45 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:49:54 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:49:54 2012] Error reading totcts from fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Jul 28 04:49:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:49:59 2012] Using photon index=1.80, rate=0.0281, arf fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src6.arf
[Sat Jul 28 04:49:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:00 2012] Updating source flux to 1.2e-13
[Sat Jul 28 04:52:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting