[Fri Jul 27 09:52:21 2012] Detection parameters:
  Position = (357.4, 335.3) = 0 26 24.13 17 11 31.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.0 +/- 15.5
  Background counts = 52.7
  Rate = 0.002 +/- 0.0004

[Fri Jul 27 09:52:22 2012] Off-axis axis estimate = 5.04'
[Fri Jul 27 09:55:23 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 09:55:23 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Fri Jul 27 09:55:23 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Fri Jul 27 09:55:23 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 8.95"
[Fri Jul 27 13:13:09 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src51.ximg exists
[Fri Jul 27 13:13:09 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src51_1.ximg exists
[Fri Jul 27 13:13:09 2012] Fit fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src51 appears to have run properly
[Fri Jul 27 13:13:11 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Fri Jul 27 13:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src51.csv
[Fri Jul 27 13:13:11 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Fri Jul 27 13:13:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src51.csv
[Fri Jul 27 13:13:11 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:21:02 2012] Source 52 is offset by 6.839740 and 4.418211 pixels which is larger than
2 X fitted extent = 0.801894 x 0.801894, not incorporating fit results
[Fri Jul 27 17:21:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:02 2012] Assessing source extent using major
[Fri Jul 27 17:21:02 2012] Source does appear to be extended
[Fri Jul 27 17:21:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:21:59 2012] Using EEF radius (= 8.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:21:59 2012] Initial guess for spatial extent in simple fitting = 8.95"
[Fri Jul 27 17:21:59 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.956
[Fri Jul 27 17:21:59 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 8.95"
[Fri Jul 27 19:40:21 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src50.ximg exists
[Fri Jul 27 19:40:21 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri Jul 27 19:40:21 2012] Fit fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src50 appears to have run properly
[Fri Jul 27 19:40:22 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri Jul 27 19:40:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Fri Jul 27 19:40:22 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri Jul 27 19:40:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50.csv
[Fri Jul 27 19:40:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:35 2012] Spatial fit model total counts = 568.866000, observed total counts = 536.000000
[Fri Jul 27 22:39:35 2012] Offset between fit and detection position for source 52 = 0.417466 pixels
[Fri Jul 27 22:39:35 2012] 561.318600 total counts/ 512.625000 bgd. counts: snr = 2.150661
Spatial fit parameters:
  Offset between fit and detection position for source 52 = 0.417466 pixels
  Position = (357.1, 335.6) = 0 26 24.22 17 11 31.2
  Extent = 6.7 (4.8-10.7)" x 2.7 (2.2-4.8)", rotation angle = 97 (90-116) degrees
  Source counts = 48.7 +/- 23.7
  Background counts = 512.6
  Rate = 0.001 +/- 0.0005
[Fri Jul 27 22:39:35 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:35 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 22:39:35 2012] Source does appear to be extended
[Fri Jul 27 22:39:35 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Fri Jul 27 22:40:11 2012] XMMSAS src. selection expression = ellipse(31022.079000, 29144.469600, 404.046612, 159.348005, 97.277486, X, Y)
[Fri Jul 27 22:40:11 2012] Writing source region out to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src52_src.reg
[Fri Jul 27 22:40:11 2012] Extracting stamp from image fullrun_pn_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (334, 312) - (380, 359)
[Fri Jul 27 22:40:11 2012] XMMSAS bgd. selection expression = annulus(31022.079000, 29144.469600, 673.411019, 1346.822039, X, Y) && !ellipse(29093.879486, 27735.149658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30465.953491, 27157.747162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33068.580000, 26876.305600, 1538.072044, 1538.072044, 0.000000, X, Y)
[Fri Jul 27 22:40:11 2012] Writing fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src52.gif
[Fri Jul 27 23:19:47 2012] Mean detx,y = (2387.76, -3485.24) 
[Fri Jul 27 23:19:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 23:20:11 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 23:20:12 2012] Setting source spectrum file to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Fri Jul 27 23:20:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Sat Jul 28 02:28:00 2012] Not generating rmf since there are only 48 counts
[Sat Jul 28 02:28:00 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:49:57 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:49:57 2012] Error reading totcts from fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src52_src_b10.pi.gz
[Sat Jul 28 04:50:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:03 2012] Using photon index=1.80, rate=0.00106, arf fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src52.arf
[Sat Jul 28 04:50:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:03 2012] Updating source flux to 4.7e-15
[Sat Jul 28 04:52:42 2012] Flag b found in src. 52 procflags, skipping spectral fitting
[Sat Jul 28 04:52:42 2012] Source 52 has fewer than 100.000000 counts, skipping spectral fitting