[Fri Jul 27 09:52:20 2012] Detection parameters:
  Position = (335.0, 319.4) = 0 26 30.95 17 10 13.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1302.9 +/- 44.4
  Background counts = 58.6
  Rate = 0.04 +/- 0.001

[Fri Jul 27 09:52:22 2012] Off-axis axis estimate = 3.05'
[Fri Jul 27 09:55:23 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 09:55:23 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Fri Jul 27 09:55:23 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.692
[Fri Jul 27 09:55:23 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.95"
[Fri Jul 27 13:13:08 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 27 13:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 13:13:08 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 27 13:13:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src4.csv
[Fri Jul 27 13:13:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 13:13:09 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 27 13:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 27 13:13:09 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 27 13:13:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 27 13:13:09 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:21:02 2012] Spatial fit model total counts = 2382.850000, observed total counts = 1646.000000
[Fri Jul 27 17:21:02 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 17:21:02 2012] Source 4 is offset by -7.569477 and -1.359038 pixels which is larger than
2 X fitted extent = 0.976607 x 0.976607, not incorporating fit results
[Fri Jul 27 17:21:02 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:02 2012] Assessing source extent using major
[Fri Jul 27 17:21:02 2012] Source does appear to be extended
[Fri Jul 27 17:21:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:21:58 2012] Using EEF radius (= 7.95 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 17:21:58 2012] Initial guess for spatial extent in simple fitting = 7.95"
[Fri Jul 27 17:21:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 15, frac = 0.692
[Fri Jul 27 17:21:58 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.95"
[Fri Jul 27 19:40:20 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jul 27 19:40:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src4.csv
[Fri Jul 27 19:40:20 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jul 27 19:40:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src4.csv
[Fri Jul 27 19:40:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 19:40:21 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jul 27 19:40:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 27 19:40:21 2012] fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jul 27 19:40:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri Jul 27 19:40:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:34 2012] Warning, spatial fit 4 centroid is now closest to src. 20
[Fri Jul 27 22:39:35 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:35 2012] Assessing source extent using major
[Fri Jul 27 22:39:35 2012] Source does appear to be extended
[Fri Jul 27 22:39:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 22:40:09 2012] Counts = 1302.895264, rescaling region sizes by 2.000000
[Fri Jul 27 22:40:09 2012] XMMSAS src. selection expression = ellipse(29093.879486, 27735.149658, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jul 27 22:40:09 2012] Writing source region out to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 27 22:40:09 2012] Extracting stamp from image fullrun_pn_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (260, 244) - (410, 394)
[Fri Jul 27 22:40:09 2012] XMMSAS bgd. selection expression = annulus(29093.879486, 27735.149658, 4350.000000, 8700.000000, X, Y) && !ellipse(24809.543400, 30325.862000, 384.676011, 384.676011, 0.000000, X, Y) && !ellipse(27694.991940, 26923.798200, 1111.992032, 1111.992032, 0.000000, X, Y) && !ellipse(30465.953491, 27157.747162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32844.794144, 27015.645305, 651.519249, 304.720143, 44.164658, X, Y) && !ellipse(25688.010600, 25519.933800, 332.846410, 332.846410, 0.000000, X, Y) && !ellipse(34310.188995, 19866.788467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38370.862488, 19502.198517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33671.866852, 18409.381821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31216.578064, 18334.375916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25200.098480, 18313.718460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32206.290680, 35747.120056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29747.884888, 33679.654053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22463.182770, 32994.027252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30135.503235, 32638.704681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37039.649384, 31901.129578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36553.070129, 32020.074890, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23158.383606, 31710.033844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25408.977600, 31184.895599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24870.800507, 30918.136841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35836.339800, 30567.069840, 442.619213, 218.856006, 247.042000, X, Y) && !ellipse(36026.052000, 29944.288800, 386.662411, 386.662411, 0.000000, X, Y) && !ellipse(31022.079000, 29144.469600, 538.728816, 212.464006, 97.277486, X, Y) && !ellipse(24757.975037, 27820.609741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26319.538483, 27166.856567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33068.580000, 26876.305600, 1538.072044, 1538.072044, 0.000000, X, Y) && !ellipse(36053.927277, 26394.126221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29627.562000, 25673.322000, 1236.120036, 1236.120036, 0.000000, X, Y) && !ellipse(21363.799780, 25838.981600, 445.713613, 445.713613, 0.000000, X, Y) && !ellipse(28201.034000, 25527.164000, 1213.328035, 1213.328035, 0.000000, X, Y) && !ellipse(25114.112701, 25165.227325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20509.262200, 24921.073200, 388.957611, 388.957611, 0.000000, X, Y) && !ellipse(28476.887848, 24857.360748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27507.674000, 24392.000400, 523.358415, 523.358415, 0.000000, X, Y) && !ellipse(25502.385400, 24105.093800, 328.024009, 328.024009, 0.000000, X, Y) && !ellipse(25005.338600, 24005.928600, 340.075210, 340.075210, 0.000000, X, Y) && !ellipse(33010.253554, 22979.824800, 370.982411, 370.982411, 0.000000, X, Y) && !ellipse(31317.585999, 22059.468307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33834.272339, 20966.858704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24595.834800, 19949.439160, 363.004010, 363.004010, 0.000000, X, Y) && !ellipse(30763.197840, 19670.340000, 235.281607, 235.281607, 0.000000, X, Y) && !ellipse(32972.962250, 19085.524857, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28762.146851, 19002.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30109.592804, 18169.343277, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 22:40:09 2012] Writing fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src4.gif
[Fri Jul 27 22:42:38 2012] Mean detx,y = (1047.25, -1133.84) 
[Fri Jul 27 22:42:43 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 22:45:10 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 22:45:11 2012] Setting source spectrum file to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 27 22:45:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 27 23:44:57 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 27 23:44:57 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:49:54 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:49:54 2012] Error reading totcts from fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 28 04:49:59 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:49:59 2012] Using photon index=1.80, rate=0.0417, arf fullrun_pn_xmm0050140201_pi300-10000_pass1_cl_src4.arf
[Sat Jul 28 04:49:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:49:59 2012] Updating source flux to 1e-13
[Sat Jul 28 04:52:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting