[Fri Jul 27 09:53:29 2012] Detection parameters:
  Position = (303.0, 190.6) = 0 26 40.66 17 1 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.3 +/- 8.9
  Background counts = 14.0
  Rate = 0.001 +/- 0.0003

[Fri Jul 27 09:53:29 2012] Off-axis axis estimate = 7.83'
[Fri Jul 27 15:13:07 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:13:07 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Fri Jul 27 15:13:07 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.906
[Fri Jul 27 15:13:07 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 10.34"
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src41.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src41.csv
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src41_1.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src41.csv
[Fri Jul 27 17:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Fri Jul 27 17:20:35 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Fri Jul 27 17:21:30 2012] Spatial fit model total counts = 192.000000, observed total counts = 192.000000
[Fri Jul 27 17:21:30 2012] Offset between fit and detection position for source 56 = 0.264237 pixels
[Fri Jul 27 17:21:30 2012] 190.342400 total counts/ 170.149000 bgd. counts: snr = 1.548085
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 0.264237 pixels
  Position = (303.1, 190.8) = 0 26 40.62 17 1 1.7
  Extent = 3.9 (2.6-7.8)", rotation angle = 0
  Source counts = 20.2 +/- 13.8
  Background counts = 170.1
  Rate = 0.0004 +/- 0.0003
  Deleting source due to low Poisson probability