[Fri Jul 27 09:53:29 2012] Detection parameters:
  Position = (317.2, 280.6) = 0 26 36.34 17 7 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.2 +/- 10.4
  Background counts = 17.8
  Rate = 0.001 +/- 0.0002

[Fri Jul 27 09:53:29 2012] Off-axis axis estimate = 1.88'
[Fri Jul 27 15:13:07 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:13:07 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Fri Jul 27 15:13:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.987
[Fri Jul 27 15:13:07 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 7.37"
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src43.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src43.csv
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src43.csv
[Fri Jul 27 17:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Jul 27 17:20:36 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Jul 27 17:21:30 2012] Source 47 is offset by 5.130423 and -6.632160 pixels which is larger than
2 X fitted extent = 0.846864 x 0.846864, not incorporating fit results
[Fri Jul 27 17:21:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:30 2012] Assessing source extent using major
[Fri Jul 27 17:21:30 2012] Source does appear to be extended
[Fri Jul 27 17:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 21:02:01 2012] Using EEF radius (= 7.37 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 21:02:01 2012] Initial guess for spatial extent in simple fitting = 7.37"
[Fri Jul 27 21:02:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 19, frac = 0.987
[Fri Jul 27 21:02:01 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 7.37"
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src42.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src42.csv
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src42_1.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src42.csv
[Fri Jul 27 22:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Fri Jul 27 22:39:14 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src42 appears to have run properly
[Fri Jul 27 22:39:51 2012] Spatial fit model total counts = 248.077000, observed total counts = 233.000000
[Fri Jul 27 22:39:51 2012] Offset between fit and detection position for source 47 = 0.216249 pixels
[Fri Jul 27 22:39:51 2012] 258.008600 total counts/ 223.156000 bgd. counts: snr = 2.333087
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 0.216249 pixels
  Position = (317.1, 280.4) = 0 26 36.38 17 7 31.5
  Extent = 5.8 (2.2-12.4)", rotation angle = 0
  Source counts = 34.9 +/- 16.1
  Background counts = 223.2
  Rate = 0.0007 +/- 0.0003
[Fri Jul 27 22:39:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:51 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 22:39:51 2012] Source does appear to be extended
[Fri Jul 27 22:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 04:04:54 2012] XMMSAS src. selection expression = ellipse(27539.079080, 24348.915400, 348.556810, 348.556810, 0.000000, X, Y)
[Sat Jul 28 04:04:54 2012] Writing source region out to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src47_src.reg
[Sat Jul 28 04:04:54 2012] Extracting stamp from image fullrun_mos2_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (297, 260) - (337, 300)
[Sat Jul 28 04:04:54 2012] XMMSAS bgd. selection expression = annulus(27539.079080, 24348.915400, 580.928017, 1161.856033, X, Y) && !ellipse(28311.519348, 26298.433655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28578.050600, 25012.704680, 756.216822, 756.216822, 0.000000, X, Y) && !ellipse(29694.770000, 25867.332000, 1242.240036, 1242.240036, 0.000000, X, Y)
[Sat Jul 28 04:04:54 2012] Writing fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src47.gif
[Sat Jul 28 04:16:31 2012] Mean detx,y = (-953.70, -2398.65) 
[Sat Jul 28 04:16:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:16:40 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:16:40 2012] Setting source spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Jul 28 04:16:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Sat Jul 28 04:47:29 2012] Not generating rmf since there are only 34 counts
[Sat Jul 28 04:47:29 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:50:17 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:17 2012] Error reading totcts from fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sat Jul 28 04:50:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:19 2012] Using photon index=1.80, rate=0.000673, arf fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src47.arf
[Sat Jul 28 04:50:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:19 2012] Updating source flux to 7.3e-15
[Sat Jul 28 04:51:59 2012] Flag b found in src. 47 procflags, skipping spectral fitting
[Sat Jul 28 04:51:59 2012] Source 47 has fewer than 100.000000 counts, skipping spectral fitting