[Fri Jul 27 09:53:29 2012] Detection parameters:
  Position = (327.8, 287.2) = 0 26 33.11 17 7 58.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.5 +/- 11.0
  Background counts = 17.6
  Rate = 0.0009 +/- 0.0002

[Fri Jul 27 09:53:29 2012] Off-axis axis estimate = 2.28'
[Fri Jul 27 15:13:07 2012] Using EEF radius (= 7.57 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:13:07 2012] Initial guess for spatial extent in simple fitting = 7.57"
[Fri Jul 27 15:13:07 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.797
[Fri Jul 27 15:13:07 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 7.57"
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src49.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src49.csv
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src49_1.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src49.csv
[Fri Jul 27 17:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:20:36 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Fri Jul 27 17:20:36 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Fri Jul 27 17:20:36 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Fri Jul 27 17:21:30 2012] Spatial fit model total counts = 350.145000, observed total counts = 350.000000
[Fri Jul 27 17:21:30 2012] Offset between fit and detection position for source 44 = 1.451573 pixels
[Fri Jul 27 17:21:30 2012] 325.315000 total counts/ 286.802000 bgd. counts: snr = 2.274135
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 1.451573 pixels
  Position = (329.0, 288.1) = 0 26 32.75 17 8 4.6
  Extent = 9.5 (4.4-15.1)", rotation angle = 0
  Source counts = 38.5 +/- 18.0
  Background counts = 286.8
  Rate = 0.0007 +/- 0.0003
[Fri Jul 27 17:21:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 17:21:30 2012] Source does appear to be extended
[Fri Jul 27 17:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 21:02:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 21:02:01 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Fri Jul 27 21:02:01 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.260
[Fri Jul 27 21:02:01 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 9.45"
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src46.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src46.csv
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src46_1.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src46.csv
[Fri Jul 27 22:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Fri Jul 27 22:39:14 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src46 appears to have run properly
[Fri Jul 27 22:39:51 2012] Warning, spatial fit 46 centroid is now closest to src. 19
[Fri Jul 27 22:39:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:51 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 22:39:51 2012] Source does appear to be extended
[Fri Jul 27 22:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 04:04:54 2012] XMMSAS src. selection expression = ellipse(28578.050600, 25012.704680, 567.162616, 567.162616, 0.000000, X, Y)
[Sat Jul 28 04:04:54 2012] Writing source region out to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src44_src.reg
[Sat Jul 28 04:04:54 2012] Extracting stamp from image fullrun_mos2_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (296, 255) - (362, 321)
[Sat Jul 28 04:04:54 2012] XMMSAS bgd. selection expression = annulus(28578.050600, 25012.704680, 945.271027, 1890.542054, X, Y) && !ellipse(27696.032800, 26988.743400, 823.528024, 823.528024, 342.904000, X, Y) && !ellipse(30462.146600, 26855.692800, 356.613610, 356.613610, 0.000000, X, Y) && !ellipse(28311.519348, 26298.433655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28579.369324, 27264.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26923.868286, 27527.558228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.079080, 24348.915400, 464.742413, 464.742413, 0.000000, X, Y) && !ellipse(29694.770000, 25867.332000, 1242.240036, 1242.240036, 0.000000, X, Y)
[Sat Jul 28 04:04:54 2012] Writing fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src44.gif
[Sat Jul 28 04:17:34 2012] Mean detx,y = (-1615.54, -1392.06) 
[Sat Jul 28 04:17:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:17:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:17:43 2012] Setting source spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jul 28 04:17:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Sat Jul 28 04:47:51 2012] Not generating rmf since there are only 38 counts
[Sat Jul 28 04:47:51 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:50:17 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:17 2012] Error reading totcts from fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Sat Jul 28 04:50:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:19 2012] Using photon index=1.80, rate=0.000744, arf fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src44.arf
[Sat Jul 28 04:50:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:19 2012] Updating source flux to 7.1e-15
[Sat Jul 28 04:51:59 2012] Source 44 has fewer than 100.000000 counts, skipping spectral fitting