[Fri Jul 27 09:53:29 2012] Detection parameters:
  Position = (246.1, 298.0) = 0 26 57.91 17 8 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.0 +/- 11.3
  Background counts = 15.5
  Rate = 0.002 +/- 0.0003

[Fri Jul 27 09:53:29 2012] Off-axis axis estimate = 3.79'
[Fri Jul 27 15:13:07 2012] Using EEF radius (= 8.32 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:13:07 2012] Initial guess for spatial extent in simple fitting = 8.32"
[Fri Jul 27 15:13:07 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.858
[Fri Jul 27 15:13:07 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.32"
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src27.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src27.csv
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src27.csv
[Fri Jul 27 17:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Jul 27 17:20:35 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri Jul 27 17:21:30 2012] Spatial fit model total counts = 192.725000, observed total counts = 193.000000
[Fri Jul 27 17:21:30 2012] Offset between fit and detection position for source 41 = 0.094352 pixels
[Fri Jul 27 17:21:30 2012] 188.953600 total counts/ 141.941000 bgd. counts: snr = 3.946030
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.094352 pixels
  Position = (246.2, 298.0) = 0 26 57.88 17 8 47.8
  Extent = 5.2 (3.9-6.9)", rotation angle = 0
  Source counts = 47.0 +/- 13.7
  Background counts = 141.9
  Rate = 0.0009 +/- 0.0003
[Fri Jul 27 17:21:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:30 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 17:21:30 2012] Source does appear to be extended
[Fri Jul 27 17:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 21:02:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 21:02:01 2012] Initial guess for spatial extent in simple fitting = 5.20"
[Fri Jul 27 21:02:01 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.044
[Fri Jul 27 21:02:01 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 5.20"
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src27.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src27.csv
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src27.csv
[Fri Jul 27 22:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri Jul 27 22:39:14 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Fri Jul 27 22:39:51 2012] Spatial fit model total counts = 193.000000, observed total counts = 193.000000
[Fri Jul 27 22:39:51 2012] Offset between fit and detection position for source 41 = 0.009217 pixels
[Fri Jul 27 22:39:51 2012] 190.600200 total counts/ 144.027000 bgd. counts: snr = 3.880736
Spatial fit parameters:
  Offset between fit and detection position for source 41 = 0.009217 pixels
  Position = (246.2, 298.0) = 0 26 57.88 17 8 47.8
  Extent = 5.1 (3.9-6.9)", rotation angle = 0
  Source counts = 46.6 +/- 13.8
  Background counts = 144.0
  Rate = 0.0009 +/- 0.0003
[Fri Jul 27 22:39:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:51 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 22:39:51 2012] Source does appear to be extended
[Fri Jul 27 22:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 04:04:53 2012] XMMSAS src. selection expression = ellipse(21373.551200, 25875.667400, 305.377809, 305.377809, 0.000000, X, Y)
[Sat Jul 28 04:04:53 2012] Writing source region out to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src41_src.reg
[Sat Jul 28 04:04:53 2012] Extracting stamp from image fullrun_mos2_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (229, 280) - (264, 316)
[Sat Jul 28 04:04:53 2012] XMMSAS bgd. selection expression = annulus(21373.551200, 25875.667400, 508.963015, 1017.926029, X, Y) && !ellipse(19668.736557, 24131.844788, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20484.478878, 24923.661400, 360.860010, 360.860010, 0.000000, X, Y)
[Sat Jul 28 04:04:53 2012] Writing fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src41.gif
[Sat Jul 28 04:12:22 2012] Mean detx,y = (5344.03, -3472.56) 
[Sat Jul 28 04:12:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:12:30 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:12:30 2012] Setting source spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Jul 28 04:12:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Sat Jul 28 04:45:13 2012] Not generating rmf since there are only 46 counts
[Sat Jul 28 04:45:13 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:50:16 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:16 2012] Error reading totcts from fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Jul 28 04:50:19 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:19 2012] Using photon index=1.80, rate=0.000899, arf fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src41.arf
[Sat Jul 28 04:50:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:19 2012] Updating source flux to 1.5e-14
[Sat Jul 28 04:51:59 2012] Source 41 has fewer than 100.000000 counts, skipping spectral fitting