[Fri Jul 27 09:53:28 2012] Detection parameters:
  Position = (287.1, 436.9) = 0 26 45.48 17 18 53.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.9 +/- 9.1
  Background counts = 12.6
  Rate = 0.0008 +/- 0.0002

[Fri Jul 27 09:53:29 2012] Off-axis axis estimate = 10.07'
[Fri Jul 27 15:13:07 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:13:07 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Fri Jul 27 15:13:07 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Fri Jul 27 15:13:07 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.47"
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src53.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src53.csv
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src53_1.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src53.csv
[Fri Jul 27 17:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:20:36 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Fri Jul 27 17:20:36 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Fri Jul 27 17:20:36 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Fri Jul 27 17:21:30 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.470471 pixels away
[Fri Jul 27 17:21:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:30 2012] Assessing source extent using major
[Fri Jul 27 17:21:30 2012] Source does appear to be extended
[Fri Jul 27 17:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 21:02:01 2012] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 21:02:01 2012] Initial guess for spatial extent in simple fitting = 11.47"
[Fri Jul 27 21:02:01 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Fri Jul 27 21:02:01 2012] Giving source the simple spatial ID 50 for pass 1, mean size = 11.47"
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src50.ximg exists
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src50_1.ximg exists
[Fri Jul 27 22:39:13 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src50 appears to have run properly
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Fri Jul 27 22:39:14 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Fri Jul 27 22:39:51 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 14.381391 pixels away
[Fri Jul 27 22:39:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:51 2012] Assessing source extent using major
[Fri Jul 27 22:39:51 2012] Source does appear to be extended
[Fri Jul 27 22:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 04:04:54 2012] XMMSAS src. selection expression = ellipse(24929.890839, 37963.222565, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 04:04:54 2012] Writing source region out to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src25_src.reg
[Sat Jul 28 04:04:54 2012] Extracting stamp from image fullrun_mos2_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (250, 399) - (325, 474)
[Sat Jul 28 04:04:54 2012] XMMSAS bgd. selection expression = annulus(24929.890839, 37963.222565, 1087.500000, 2175.000000, X, Y) && !ellipse(22259.563263, 38956.880554, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 04:04:54 2012] Writing fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src25.gif
[Sat Jul 28 04:18:14 2012] Mean detx,y = (6921.54, 8978.04) 
[Sat Jul 28 04:18:15 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:18:23 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:18:23 2012] Setting source spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jul 28 04:18:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jul 28 04:48:09 2012] Not generating rmf since there are only 42 counts
[Sat Jul 28 04:48:09 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:50:17 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:17 2012] Error reading totcts from fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jul 28 04:50:20 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:20 2012] Using photon index=1.80, rate=0.000829, arf fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src25.arf
[Sat Jul 28 04:50:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:20 2012] Updating source flux to 1.9e-14
[Sat Jul 28 04:51:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting