[Fri Jul 27 09:53:28 2012] Detection parameters:
  Position = (326.0, 302.8) = 0 26 33.68 17 9 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 153.2 +/- 16.7
  Background counts = 18.9
  Rate = 0.003 +/- 0.0004

[Fri Jul 27 09:53:29 2012] Off-axis axis estimate = 2.02'
[Fri Jul 27 15:13:07 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:13:07 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Fri Jul 27 15:13:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.716
[Fri Jul 27 15:13:07 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.44"
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src12.csv
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src12.csv
[Fri Jul 27 17:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jul 27 17:20:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jul 27 17:20:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jul 27 17:20:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:21:30 2012] Warning, spatial fit 12 centroid is now closest to src. 7
[Fri Jul 27 17:21:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:30 2012] Assessing source extent using major
[Fri Jul 27 17:21:30 2012] Source does appear to be extended
[Fri Jul 27 17:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 21:02:01 2012] Using EEF radius (= 7.44 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 21:02:01 2012] Initial guess for spatial extent in simple fitting = 7.44"
[Fri Jul 27 21:02:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.716
[Fri Jul 27 21:02:01 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.44"
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src12.csv
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src12.csv
[Fri Jul 27 22:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jul 27 22:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jul 27 22:39:14 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jul 27 22:39:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri Jul 27 22:39:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:51 2012] Source 19 is offset by 6.689487 and -7.002671 pixels which is larger than
2 X fitted extent = 5.299908 x 5.299908, not incorporating fit results
[Fri Jul 27 22:39:51 2012] Source 19 is offset by 1.414682 and 7.155145 pixels which is larger than
2 X fitted extent = 1.086520 x 1.086520, not incorporating fit results
[Fri Jul 27 22:39:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:51 2012] Assessing source extent using major
[Fri Jul 27 22:39:51 2012] Source does appear to be extended
[Fri Jul 27 22:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 04:04:53 2012] XMMSAS src. selection expression = ellipse(28311.519348, 26298.433655, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 04:04:53 2012] Writing source region out to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src19_src.reg
[Sat Jul 28 04:04:53 2012] Extracting stamp from image fullrun_mos2_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (288, 265) - (363, 340)
[Sat Jul 28 04:04:53 2012] XMMSAS bgd. selection expression = annulus(28311.519348, 26298.433655, 1087.500000, 2175.000000, X, Y) && !ellipse(27696.032800, 26988.743400, 823.528024, 823.528024, 342.904000, X, Y) && !ellipse(29081.571180, 27619.936600, 494.266414, 326.083209, 28.668800, X, Y) && !ellipse(30462.146600, 26855.692800, 356.613610, 356.613610, 0.000000, X, Y) && !ellipse(28423.147400, 27782.435730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28579.369324, 27264.975830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26923.868286, 27527.558228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27539.079080, 24348.915400, 464.742413, 464.742413, 0.000000, X, Y) && !ellipse(28578.050600, 25012.704680, 756.216822, 756.216822, 0.000000, X, Y) && !ellipse(29694.770000, 25867.332000, 1242.240036, 1242.240036, 0.000000, X, Y)
[Sat Jul 28 04:04:53 2012] Writing fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src19.gif
[Sat Jul 28 04:08:32 2012] Mean detx,y = (-748.17, -280.88) 
[Sat Jul 28 04:08:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:08:42 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:08:42 2012] Setting source spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jul 28 04:08:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jul 28 04:43:23 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 28 04:43:23 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:50:15 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:15 2012] Error reading totcts from fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jul 28 04:50:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:18 2012] Using photon index=1.80, rate=0.00323, arf fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src19.arf
[Sat Jul 28 04:50:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:18 2012] Updating source flux to 3.1e-14
[Sat Jul 28 04:51:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting