[Fri Jul 27 09:53:28 2012] Detection parameters:
  Position = (317.7, 168.3) = 0 26 36.18 16 59 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 218.3 +/- 19.1
  Background counts = 14.1
  Rate = 0.008 +/- 0.0007

[Fri Jul 27 09:53:29 2012] Off-axis axis estimate = 9.54'
[Fri Jul 27 15:13:07 2012] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 15:13:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 15:13:07 2012] Initial guess for spatial extent in simple fitting = 11.20"
[Fri Jul 27 15:13:07 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953
[Fri Jul 27 15:13:07 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.20"
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src7.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 17:20:34 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Jul 27 17:20:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src7.csv
[Fri Jul 27 17:20:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Jul 27 17:20:35 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Jul 27 17:20:35 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Jul 27 17:21:30 2012] Source 12 is offset by 3.805970 and -6.574887 pixels which is larger than
2 X fitted extent = 2.734221 x 2.734221, not incorporating fit results
[Fri Jul 27 17:21:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:30 2012] Assessing source extent using major
[Fri Jul 27 17:21:30 2012] Source does appear to be extended
[Fri Jul 27 17:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:21:30 2012] Source is confused with source 1
[Fri Jul 27 21:02:01 2012] Using EEF radius (= 11.20 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 21:02:01 2012] Initial guess for spatial extent in simple fitting = 11.20"
[Fri Jul 27 21:02:01 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953
[Fri Jul 27 21:02:01 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.20"
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src7.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src7.csv
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src7_1.ximg exists
[Fri Jul 27 22:39:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src7.csv
[Fri Jul 27 22:39:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Fri Jul 27 22:39:13 2012] fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Fri Jul 27 22:39:13 2012] Fit fullrun_mos2_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Jul 27 22:39:51 2012] Spatial fit model total counts = 958.510000, observed total counts = 1060.000000
[Fri Jul 27 22:39:51 2012] Offset between fit and detection position for source 12 = 9.954986 pixels
[Fri Jul 27 22:39:51 2012] 968.829000 total counts/ 338.755000 bgd. counts: snr = 34.233295
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 9.954986 pixels
  Position = (325.9, 162.6) = 0 26 33.71 16 58 59.1
  Extent = 22.4 (22.2-44.8)", rotation angle = 0
  Source counts = 630.1 +/- 31.1
  Background counts = 338.8
  Rate = 0.01 +/- 0.0006
[Fri Jul 27 22:39:51 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:51 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 22:39:51 2012] Source does appear to be extended
[Fri Jul 27 22:39:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 04:04:53 2012] XMMSAS src. selection expression = ellipse(28305.398000, 14101.234000, 1343.538039, 1343.538039, 0.000000, X, Y)
[Sat Jul 28 04:04:53 2012] Writing source region out to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src12_src.reg
[Sat Jul 28 04:04:53 2012] Extracting stamp from image fullrun_mos2_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (249, 85) - (403, 240)
[Sat Jul 28 04:04:53 2012] XMMSAS bgd. selection expression = annulus(28305.398000, 14101.234000, 2239.230064, 4478.460129, X, Y) && !ellipse(27260.428100, 15157.579120, 484.773614, 484.773614, 0.000000, X, Y) && !ellipse(29303.853200, 11619.482000, 473.152814, 473.152814, 0.000000, X, Y) && !ellipse(29752.500400, 15765.090000, 472.368014, 472.368014, 0.000000, X, Y) && !ellipse(25206.174200, 18261.223400, 487.277614, 487.277614, 0.000000, X, Y) && !ellipse(31141.690308, 18381.510651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24547.346252, 12590.366058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.933800, 12857.425200, 545.220016, 545.220016, 0.000000, X, Y) && !ellipse(24726.948200, 10211.209600, 627.404818, 320.396009, 5.314470, X, Y)
[Sat Jul 28 04:04:53 2012] Writing fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src12.gif
[Sat Jul 28 04:06:34 2012] Mean detx,y = (-5284.55, -11386.39) 
[Sat Jul 28 04:06:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 04:06:52 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 04:06:52 2012] Setting source spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jul 28 04:06:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jul 28 04:50:15 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:15 2012] Error reading totcts from fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jul 28 04:50:18 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:18 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos2_xmm0050140201_pi300-10000_pass1_cl_src12.arf
[Sat Jul 28 04:50:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:18 2012] Updating source flux to 2e-13
[Sat Jul 28 04:51:59 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Sat Jul 28 04:51:59 2012] Flag c found in src. 12 procflags, skipping spectral fitting