[Fri Jul 27 09:52:54 2012] Detection parameters:
  Position = (325.8, 280.8) = 0 26 33.72 17 7 32.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.1 +/- 9.8
  Background counts = 17.1
  Rate = 0.0008 +/- 0.0002

[Fri Jul 27 09:52:54 2012] Off-axis axis estimate = 2.36'
[Fri Jul 27 13:13:12 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 13:13:12 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Fri Jul 27 13:13:12 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.791
[Fri Jul 27 13:13:12 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 7.61"
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src50.ximg exists
[Fri Jul 27 15:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src50.csv
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Jul 27 15:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src50.csv
[Fri Jul 27 15:13:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 15:13:07 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Jul 27 15:13:07 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Jul 27 15:13:07 2012] Fit fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Fri Jul 27 17:21:15 2012] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 10.883440 pixels away
[Fri Jul 27 17:21:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:15 2012] Assessing source extent using major
[Fri Jul 27 17:21:15 2012] Source does appear to be extended
[Fri Jul 27 17:21:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 19:40:23 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 19:40:23 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Fri Jul 27 19:40:23 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.791
[Fri Jul 27 19:40:23 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 7.61"
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src45.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src45.csv
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src45.csv
[Fri Jul 27 21:02:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 21:02:01 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri Jul 27 21:02:01 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri Jul 27 21:02:01 2012] Fit fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Fri Jul 27 22:39:43 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 40 at 10.883440 pixels away
[Fri Jul 27 22:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:43 2012] Assessing source extent using major
[Fri Jul 27 22:39:43 2012] Source does appear to be extended
[Fri Jul 27 22:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:01:50 2012] XMMSAS src. selection expression = ellipse(28299.672607, 24380.939636, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 03:01:50 2012] Writing source region out to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src40_src.reg
[Sat Jul 28 03:01:50 2012] Extracting stamp from image fullrun_mos1_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (288, 243) - (363, 318)
[Sat Jul 28 03:01:50 2012] XMMSAS bgd. selection expression = annulus(28299.672607, 24380.939636, 1087.500000, 2175.000000, X, Y) && !ellipse(27744.580200, 26927.749000, 1069.040031, 1069.040031, 0.000000, X, Y) && !ellipse(30459.823000, 26866.635800, 378.921611, 378.921611, 0.000000, X, Y) && !ellipse(28792.183197, 26759.293640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25229.818000, 24067.994800, 1153.688033, 538.623215, 348.321000, X, Y) && !ellipse(25469.467133, 24092.545044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27980.291168, 25626.528046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27708.850000, 27285.436000, 1186.128034, 1186.128034, 0.000000, X, Y)
[Sat Jul 28 03:01:50 2012] Writing fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src40.gif
[Sat Jul 28 03:20:19 2012] Mean detx,y = (-1874.87, 1399.61) 
[Sat Jul 28 03:20:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 03:20:29 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 03:20:29 2012] Setting source spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jul 28 03:20:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sat Jul 28 04:04:18 2012] Not generating rmf since there are only 39 counts
[Sat Jul 28 04:04:18 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:50:11 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:11 2012] Error reading totcts from fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Jul 28 04:50:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:14 2012] Using photon index=1.80, rate=0.000798, arf fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src40.arf
[Sat Jul 28 04:50:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:14 2012] Updating source flux to 7.8e-15
[Sat Jul 28 04:50:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting