[Fri Jul 27 09:52:53 2012] Detection parameters:
  Position = (319.8, 310.9) = 0 26 35.55 17 9 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 767.1 +/- 34.6
  Background counts = 18.3
  Rate = 0.02 +/- 0.0007

[Fri Jul 27 09:52:54 2012] Off-axis axis estimate = 1.80'
[Fri Jul 27 13:13:12 2012] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 13:13:12 2012] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Jul 27 13:13:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.838
[Fri Jul 27 13:13:12 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.33"
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jul 27 15:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jul 27 15:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src3.csv
[Fri Jul 27 15:13:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jul 27 15:13:07 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jul 27 15:13:07 2012] Fit fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jul 27 17:21:15 2012] Spatial fit model total counts = 1855.340000, observed total counts = 1854.000000
[Fri Jul 27 17:21:15 2012] Offset between fit and detection position for source 4 = 0.923362 pixels
[Fri Jul 27 17:21:15 2012] 1848.610000 total counts/ 951.656000 bgd. counts: snr = 29.075700
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.923362 pixels
  Position = (319.5, 310.1) = 0 26 35.66 17 9 40.4
  Extent = 13.4 (11.8-14.7)", rotation angle = 0
  Source counts = 897.0 +/- 43.0
  Background counts = 951.7
  Rate = 0.02 +/- 0.0008
[Fri Jul 27 17:21:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:15 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 17:21:15 2012] Source does appear to be extended
[Fri Jul 27 17:21:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 19:40:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 19:40:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 19:40:23 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Fri Jul 27 19:40:23 2012] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.097
[Fri Jul 27 19:40:23 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.36"
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src3.csv
[Fri Jul 27 21:02:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jul 27 21:02:00 2012] Fit fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jul 27 22:39:43 2012] Warning, spatial fit 3 centroid is now closest to src. 33
[Fri Jul 27 22:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 22:39:43 2012] Source does appear to be extended
[Fri Jul 27 22:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 22:39:43 2012] Source is confused with source 30
[Sat Jul 28 03:01:49 2012] XMMSAS src. selection expression = ellipse(27744.580200, 26927.749000, 801.780023, 801.780023, 0.000000, X, Y)
[Sat Jul 28 03:01:49 2012] Writing source region out to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src4_src.reg
[Sat Jul 28 03:01:49 2012] Extracting stamp from image fullrun_mos1_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (273, 264) - (366, 356)
[Sat Jul 28 03:01:49 2012] XMMSAS bgd. selection expression = annulus(27744.580200, 26927.749000, 1336.300038, 2672.600077, X, Y) && !ellipse(29079.981600, 27617.880600, 480.360014, 480.360014, 0.000000, X, Y) && !ellipse(30459.823000, 26866.635800, 378.921611, 378.921611, 0.000000, X, Y) && !ellipse(25696.214200, 25533.286600, 415.312012, 268.108008, 279.058312, X, Y) && !ellipse(28792.183197, 26759.293640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25229.818000, 24067.994800, 1153.688033, 538.623215, 348.321000, X, Y) && !ellipse(31103.232208, 29125.487610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25469.467133, 24092.545044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27980.291168, 25626.528046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27708.850000, 27285.436000, 1186.128034, 1186.128034, 0.000000, X, Y) && !ellipse(28299.672607, 24380.939636, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:01:49 2012] Writing fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src4.gif
[Sat Jul 28 03:02:43 2012] Mean detx,y = (221.37, -58.53) 
[Sat Jul 28 03:02:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 03:03:02 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 03:03:02 2012] Setting source spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 28 03:03:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jul 28 04:50:08 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:08 2012] Error reading totcts from fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jul 28 04:50:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:12 2012] Using photon index=1.80, rate=0.0173, arf fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src4.arf
[Sat Jul 28 04:50:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:12 2012] Updating source flux to 1.6e-13
[Sat Jul 28 04:50:23 2012] Flag c found in src. 4 procflags, skipping spectral fitting