[Fri Jul 27 09:52:53 2012] Detection parameters:
  Position = (358.1, 335.3) = 0 26 23.94 17 11 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.7 +/- 10.4
  Background counts = 17.3
  Rate = 0.001 +/- 0.0002

[Fri Jul 27 09:52:54 2012] Off-axis axis estimate = 5.08'
[Fri Jul 27 13:13:12 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 13:13:12 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Fri Jul 27 13:13:12 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.914
[Fri Jul 27 13:13:12 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 8.97"
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src30.ximg exists
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src30_1.ximg exists
[Fri Jul 27 15:13:06 2012] Fit fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src30 appears to have run properly
[Fri Jul 27 15:13:07 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Fri Jul 27 15:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jul 27 15:13:07 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Fri Jul 27 15:13:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src30.csv
[Fri Jul 27 15:13:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 17:21:15 2012] Warning: source 30 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 11.252459 pixels away
[Fri Jul 27 17:21:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:15 2012] Assessing source extent using major
[Fri Jul 27 17:21:15 2012] Source does appear to be extended
[Fri Jul 27 17:21:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 19:40:23 2012] Using EEF radius (= 8.97 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 19:40:23 2012] Initial guess for spatial extent in simple fitting = 8.97"
[Fri Jul 27 19:40:23 2012] source mask rpix=2.1, npix_max = 26, mask sum = 24, frac = 0.914
[Fri Jul 27 19:40:23 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.97"
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src30.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src30.csv
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src30_1.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src30.csv
[Fri Jul 27 21:02:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 21:02:01 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Fri Jul 27 21:02:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Jul 27 21:02:01 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Fri Jul 27 21:02:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src30.csv
[Fri Jul 27 21:02:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:43 2012] Spatial fit model total counts = 235.608000, observed total counts = 210.000000
[Fri Jul 27 22:39:43 2012] Poor agreement between spatial fit and data for source 29
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 22:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:43 2012] Assessing source extent using major
[Fri Jul 27 22:39:43 2012] Source does appear to be extended
[Fri Jul 27 22:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:01:49 2012] XMMSAS src. selection expression = ellipse(31103.232208, 29125.487610, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 28 03:01:49 2012] Writing source region out to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src29_src.reg
[Sat Jul 28 03:01:49 2012] Extracting stamp from image fullrun_mos1_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (321, 298) - (396, 373)
[Sat Jul 28 03:01:49 2012] XMMSAS bgd. selection expression = annulus(31103.232208, 29125.487610, 1087.500000, 2175.000000, X, Y) && !ellipse(29079.981600, 27617.880600, 480.360014, 480.360014, 0.000000, X, Y) && !ellipse(30459.823000, 26866.635800, 378.921611, 378.921611, 0.000000, X, Y) && !ellipse(32843.287140, 27034.561200, 532.260815, 345.482410, 0.000000, X, Y) && !ellipse(28792.183197, 26759.293640, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:01:49 2012] Writing fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src29.gif
[Sat Jul 28 03:17:01 2012] Mean detx,y = (3544.53, 2097.98) 
[Sat Jul 28 03:17:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 03:17:12 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 03:17:12 2012] Setting source spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jul 28 03:17:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jul 28 03:55:04 2012] Not generating rmf since there are only 57 counts
[Sat Jul 28 03:55:04 2012] rmf not generated due to insufficient counts
[Sat Jul 28 04:50:10 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:10 2012] Error reading totcts from fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jul 28 04:50:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:13 2012] Using photon index=1.80, rate=0.0013, arf fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src29.arf
[Sat Jul 28 04:50:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:13 2012] Updating source flux to 1.4e-14
[Sat Jul 28 04:50:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting