[Fri Jul 27 09:52:53 2012] Detection parameters:
  Position = (317.9, 168.9) = 0 26 36.13 16 59 25.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 229.8 +/- 19.9
  Background counts = 11.0
  Rate = 0.004 +/- 0.0004

[Fri Jul 27 09:52:54 2012] Off-axis axis estimate = 9.50'
[Fri Jul 27 13:13:12 2012] Using EEF radius (= 11.18 ")to estimate initial spatial extent for simple fitting
[Fri Jul 27 13:13:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 13:13:12 2012] Initial guess for spatial extent in simple fitting = 11.18"
[Fri Jul 27 13:13:12 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.955
[Fri Jul 27 13:13:12 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.18"
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src8.ximg exists
[Fri Jul 27 15:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src8.csv
[Fri Jul 27 15:13:06 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Jul 27 15:13:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src8.csv
[Fri Jul 27 15:13:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 15:13:07 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Jul 27 15:13:07 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Jul 27 15:13:07 2012] Fit fullrun_mos1_xmm0050140201_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Jul 27 17:21:15 2012] Spatial fit model total counts = 992.408000, observed total counts = 1074.000000
[Fri Jul 27 17:21:15 2012] Offset between fit and detection position for source 10 = 7.359850 pixels
[Fri Jul 27 17:21:15 2012] 1008.693147 total counts/ 0.013147 bgd. counts: snr = 8797.144588
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 7.359850 pixels
  Position = (323.3, 163.9) = 0 26 34.49 16 59 4.7
  Extent = 22.4 (22.2-44.7)", rotation angle = 0
  Source counts = 1008.7 +/- 31.8
  Background counts = 0.0
  Rate = 0.02 +/- 0.0006
[Fri Jul 27 17:21:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 17:21:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 17:21:15 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 17:21:15 2012] Source does appear to be extended
[Fri Jul 27 17:21:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 17:21:15 2012] Source is confused with source 1
[Fri Jul 27 19:40:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 27 19:40:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jul 27 19:40:23 2012] Initial guess for spatial extent in simple fitting = 22.35"
[Fri Jul 27 19:40:23 2012] source mask rpix=5.1, npix_max = 127, mask sum = 132, frac = 1.038
[Fri Jul 27 19:40:23 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 22.35"
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src8.ximg exists
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri Jul 27 21:02:00 2012] Fit fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_src8 appears to have run properly
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jul 27 21:02:00 2012] fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri Jul 27 21:02:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri Jul 27 21:02:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0050140201_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 22:39:43 2012] Warning, spatial fit 8 centroid is now closest to src. 47
[Fri Jul 27 22:39:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 22:39:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 22:39:43 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 22:39:43 2012] Source does appear to be extended
[Fri Jul 27 22:39:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 28 03:01:49 2012] Counts = 1008.680000, rescaling region sizes by 2.000000
[Sat Jul 28 03:01:49 2012] XMMSAS src. selection expression = ellipse(28082.790000, 14213.808000, 2682.372077, 2682.372077, 0.000000, X, Y)
[Sat Jul 28 03:01:49 2012] Writing source region out to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src10_src.reg
[Sat Jul 28 03:01:49 2012] Extracting stamp from image fullrun_mos1_xmm0050140201_pi300-10000_cl_sm2.00.img.gz, (169, 10) - (478, 318)
[Sat Jul 28 03:01:49 2012] XMMSAS bgd. selection expression = annulus(28082.790000, 14213.808000, 8941.240257, 17882.480515, X, Y) && !ellipse(27278.838720, 15189.470400, 491.966414, 491.966414, 0.000000, X, Y) && !ellipse(18569.852394, 24690.255268, 655.164477, 481.435295, 82.380822, X, Y) && !ellipse(27744.580200, 26927.749000, 1069.040031, 1069.040031, 0.000000, X, Y) && !ellipse(24823.680640, 30328.533400, 414.227212, 414.227212, 0.000000, X, Y) && !ellipse(29079.981600, 27617.880600, 480.360014, 480.360014, 0.000000, X, Y) && !ellipse(30459.823000, 26866.635800, 378.921611, 378.921611, 0.000000, X, Y) && !ellipse(34320.294037, 19873.761902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19676.491898, 24130.198669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11449.177383, 23624.681091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29750.991272, 15862.741440, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33684.523376, 18412.014282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25101.091437, 18293.274956, 610.140818, 526.168062, 198.805255, X, Y) && !ellipse(25696.214200, 25533.286600, 415.312012, 268.108008, 279.058312, X, Y) && !ellipse(32843.287140, 27034.561200, 532.260815, 345.482410, 0.000000, X, Y) && !ellipse(20727.170000, 20544.090000, 331.279210, 331.279210, 0.000000, X, Y) && !ellipse(12174.527400, 21968.070600, 522.861615, 522.861615, 0.000000, X, Y) && !ellipse(26240.677180, 16537.053800, 304.799209, 304.799209, 0.000000, X, Y) && !ellipse(28792.183197, 26759.293640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11071.029526, 29612.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18654.309601, 22972.135956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24532.594910, 12643.847641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20511.911469, 24922.865631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12946.895600, 31381.145000, 505.123215, 505.123215, 0.000000, X, Y) && !ellipse(25229.818000, 24067.994800, 1153.688033, 538.623215, 348.321000, X, Y) && !ellipse(15687.109924, 20205.980408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24839.564087, 10189.940796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31103.232208, 29125.487610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19073.696400, 27388.631600, 409.252812, 409.252812, 0.000000, X, Y) && !ellipse(42052.565420, 23582.738600, 517.160015, 517.160015, 0.000000, X, Y) && !ellipse(32797.708000, 16655.579600, 517.848015, 517.848015, 0.000000, X, Y) && !ellipse(25469.467133, 24092.545044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36952.305200, 14257.714200, 515.358415, 515.358415, 0.000000, X, Y) && !ellipse(38375.633575, 19527.147827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14936.641256, 22244.841401, 609.408119, 310.440552, 54.434282, X, Y) && !ellipse(27980.291168, 25626.528046, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41264.868400, 32381.143000, 410.598412, 410.598412, 0.000000, X, Y) && !ellipse(22778.823273, 16035.403305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27708.850000, 27285.436000, 1186.128034, 1186.128034, 0.000000, X, Y) && !ellipse(28299.672607, 24380.939636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29129.916199, 12859.530273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26958.829712, 9884.968201, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 28 03:01:49 2012] Writing fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src10.gif
[Sat Jul 28 03:04:13 2012] Mean detx,y = (-11026.69, 4816.87) 
[Sat Jul 28 03:04:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 28 03:10:46 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 28 03:10:46 2012] Setting source spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jul 28 03:10:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Sat Jul 28 04:50:09 2012] Updating aperture counts using extracted products
[Sat Jul 28 04:50:09 2012] Error reading totcts from fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Sat Jul 28 04:50:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 28 04:50:12 2012] Using photon index=1.80, rate=0.0195, arf fullrun_mos1_xmm0050140201_pi300-10000_pass1_cl_src10.arf
[Sat Jul 28 04:50:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 28 04:50:12 2012] Updating source flux to 3e-13
[Sat Jul 28 04:50:23 2012] Flag c found in src. 10 procflags, skipping spectral fitting