[Wed Jun 27 17:46:16 2012] Detection parameters:
  Position = (283.4, 152.2) = 5 35 15.18 -4 44 42.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3579.0 +/- 71.2
  Background counts = 25.1
  Rate = 0.2 +/- 0.005

[Wed Jun 27 17:46:17 2012] Off-axis axis estimate = 10.66'
[Wed Jun 27 17:49:15 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 17:49:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 17:49:15 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Wed Jun 27 17:49:15 2012] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.023
[Wed Jun 27 17:49:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.76"
[Wed Jun 27 21:06:06 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 21:06:06 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 21:06:06 2012] Fit fullrun_pn_xmm0049560301_pi300-10000_cl_pass0_src1 appears to have run properly
[Wed Jun 27 21:06:08 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 21:06:08 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 21:06:08 2012] Fit fullrun_pn_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 28 02:41:40 2012] Warning, spatial fit 1 centroid is now closest to src. 2
[Thu Jun 28 02:41:41 2012] Spatial fit model total counts = 4103.090000, observed total counts = 4106.000000
[Thu Jun 28 02:41:41 2012] Offset between fit and detection position for source 1 = 0.594934 pixels
[Thu Jun 28 02:41:41 2012] Warning, changing simple spatial fit ID from 1 to 2
[Thu Jun 28 02:41:41 2012] 3935.677000 total counts/ 3029.170000 bgd. counts: snr = 16.470597
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.594934 pixels
  Position = (284.0, 152.4) = 5 35 15.02 -4 44 42.1
  Extent = 4.0 (3.7-4.3)", rotation angle = 0
  Source counts = 906.5 +/- 62.7
  Background counts = 3029.2
  Rate = 0.06 +/- 0.004
[Thu Jun 28 02:41:41 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:41:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:41:41 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 02:41:41 2012] Source does appear to be extended
[Thu Jun 28 02:41:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 02:42:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 02:42:32 2012] Initial guess for spatial extent in simple fitting = 4.01"
[Thu Jun 28 02:42:32 2012] source mask rpix=0.9, npix_max = 8, mask sum = 6, frac = 0.742
[Thu Jun 28 02:42:32 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.01"
[Thu Jun 28 05:47:08 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 28 05:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 05:47:08 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 28 05:47:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_src1.csv
[Thu Jun 28 05:47:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 05:47:09 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 28 05:47:09 2012] fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 28 05:47:09 2012] Fit fullrun_pn_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 28 11:03:27 2012] Spatial fit model total counts = 4183.030000, observed total counts = 4191.000000
[Thu Jun 28 11:03:27 2012] Offset between fit and detection position for source 1 = 0.628401 pixels
[Thu Jun 28 11:03:27 2012] 4293.110000 total counts/ 1904.030000 bgd. counts: snr = 54.751220
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.628401 pixels
  Position = (283.4, 152.3) = 5 35 15.20 -4 44 42.5
  Extent = 5.8 (5.5-5.9)", rotation angle = 0
  Source counts = 2389.1 +/- 65.5
  Background counts = 1904.0
  Rate = 0.2 +/- 0.004
[Thu Jun 28 11:03:27 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:03:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:03:27 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 11:03:27 2012] Source does appear to be extended
[Thu Jun 28 11:03:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 11:04:49 2012] Counts = 2389.080000, rescaling region sizes by 2.000000
[Thu Jun 28 11:04:49 2012] XMMSAS src. selection expression = ellipse(24603.595600, 13201.005000, 690.350420, 690.350420, 0.000000, X, Y)
[Thu Jun 28 11:04:49 2012] Writing source region out to fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 28 11:04:49 2012] Extracting stamp from image fullrun_pn_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (244, 113) - (323, 192)
[Thu Jun 28 11:04:50 2012] XMMSAS bgd. selection expression = annulus(24603.595600, 13201.005000, 2301.168066, 4602.336132, X, Y) && !ellipse(25381.180000, 13525.648000, 327.927209, 327.927209, 0.000000, X, Y) && !ellipse(22326.910736, 8650.405464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23751.522461, 17384.454224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22158.171677, 14743.585526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21161.822000, 9328.965500, 2207.184064, 2207.184064, 0.000000, X, Y) && !ellipse(29762.299042, 7835.565689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27663.596619, 7914.098137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22296.588200, 8208.769200, 488.131214, 488.131214, 0.000000, X, Y) && !ellipse(24108.361053, 18214.770828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26139.689453, 17343.471191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22461.995972, 16299.240204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20614.655792, 15728.650513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25050.314800, 15277.237600, 614.310418, 614.310418, 0.000000, X, Y) && !ellipse(19262.360428, 14059.567673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23827.209381, 13031.647858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20807.718903, 12808.751511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24099.012695, 11970.909225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25654.514709, 10949.928993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20700.994690, 9895.339409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27493.106567, 9168.752144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28373.585968, 7917.789955, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 11:04:50 2012] Writing fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1.gif
[Thu Jun 28 11:05:05 2012] Mean detx,y = (-361.85, -11260.08) 
[Thu Jun 28 11:05:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 11:06:24 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 11:06:24 2012] Setting source spectrum file to fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 11:06:24 2012] Setting bgd. spectrum file to fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 28 16:37:46 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:46 2012] Error reading totcts from fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 16:37:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:47 2012] Using photon index=1.80, rate=0.154, arf fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 16:37:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:48 2012] Updating source flux to 1e-12
[Thu Jun 28 16:44:06 2012] Reading fit data from xmm0049560301/analysis//spectral/fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 28 16:44:06 2012] Spectral fit parameter nH value = 2.25322e+21
[Thu Jun 28 16:44:06 2012] Spectral fit parameter PhoIndex value = 3.19692
[Thu Jun 28 16:44:06 2012] Failed to get F(0.3-8.0) from xmm0049560301/analysis//spectral/fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 28 16:44:06 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:44:06 2012] Using Nh = 2.3e+21, photon index=3.20, rate=0.154, arf fullrun_pn_xmm0049560301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 16:44:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:44:06 2012] Updating source flux to 7.5e-13