[Wed Jun 27 17:47:38 2012] Detection parameters:
  Position = (239.8, 147.8) = 5 35 27.86 -4 45 3.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.1 +/- 11.7
  Background counts = 9.3
  Rate = 0.006 +/- 0.0009

[Wed Jun 27 17:47:39 2012] Off-axis axis estimate = 11.72'
[Wed Jun 27 23:36:02 2012] Using EEF radius (= 12.29 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 23:36:02 2012] Initial guess for spatial extent in simple fitting = 12.29"
[Wed Jun 27 23:36:02 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.950
[Wed Jun 27 23:36:02 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.29"
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src25.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src25.csv
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src25_1.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src25.csv
[Thu Jun 28 02:41:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Thu Jun 28 02:41:19 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Thu Jun 28 02:42:09 2012] Spatial fit model total counts = 148.988000, observed total counts = 149.000000
[Thu Jun 28 02:42:09 2012] Offset between fit and detection position for source 62 = 0.193330 pixels
[Thu Jun 28 02:42:09 2012] 151.783600 total counts/ 96.281300 bgd. counts: snr = 5.656399
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.193330 pixels
  Position = (240.0, 147.8) = 5 35 27.80 -4 45 2.0
  Extent = 6.0 (3.6-8.2)", rotation angle = 0
  Source counts = 55.5 +/- 12.3
  Background counts = 96.3
  Rate = 0.002 +/- 0.0005
[Thu Jun 28 02:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:42:09 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 02:42:09 2012] Source does appear to be extended
[Thu Jun 28 02:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 07:55:44 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 28 07:55:44 2012] Initial guess for spatial extent in simple fitting = 6.00"
[Thu Jun 28 07:55:44 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.132
[Thu Jun 28 07:55:44 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 6.00"
[Thu Jun 28 11:02:55 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jun 28 11:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src25.csv
[Thu Jun 28 11:02:55 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jun 28 11:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src25.csv
[Thu Jun 28 11:02:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jun 28 11:02:56 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Thu Jun 28 11:04:08 2012] Spatial fit model total counts = 147.682000, observed total counts = 146.000000
[Thu Jun 28 11:04:08 2012] Offset between fit and detection position for source 62 = 0.262581 pixels
[Thu Jun 28 11:04:08 2012] 151.512200 total counts/ 104.648000 bgd. counts: snr = 4.581163
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.262581 pixels
  Position = (239.9, 147.6) = 5 35 27.85 -4 45 2.8
  Extent = 4.6 (3.4-7.7)", rotation angle = 0
  Source counts = 46.9 +/- 12.3
  Background counts = 104.6
  Rate = 0.002 +/- 0.0005
[Thu Jun 28 11:04:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:04:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:04:08 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 11:04:08 2012] Source does appear to be extended
[Thu Jun 28 11:04:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:11:31 2012] XMMSAS src. selection expression = ellipse(20820.243380, 12794.206200, 277.614008, 277.614008, 0.000000, X, Y)
[Thu Jun 28 15:11:31 2012] Writing source region out to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src62_src.reg
[Thu Jun 28 15:11:31 2012] Extracting stamp from image fullrun_mos2_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (224, 132) - (256, 164)
[Thu Jun 28 15:11:31 2012] XMMSAS bgd. selection expression = annulus(20820.243380, 12794.206200, 462.690013, 925.380027, X, Y)
[Thu Jun 28 15:11:31 2012] Writing fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src62.gif
[Thu Jun 28 15:20:20 2012] Mean detx,y = (-2692.37, 10546.28) 
[Thu Jun 28 15:20:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:20:28 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:20:28 2012] Setting source spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Thu Jun 28 15:20:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Thu Jun 28 16:25:46 2012] Not generating rmf since there are only 46 counts
[Thu Jun 28 16:25:46 2012] rmf not generated due to insufficient counts
[Thu Jun 28 16:37:53 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:53 2012] Error reading totcts from fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Thu Jun 28 16:37:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:56 2012] Using photon index=1.80, rate=0.00178, arf fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src62.arf
[Thu Jun 28 16:37:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:56 2012] Updating source flux to 7.6e-14
[Thu Jun 28 16:39:47 2012] Source 62 has fewer than 100.000000 counts, skipping spectral fitting