[Wed Jun 27 17:47:37 2012] Detection parameters:
  Position = (165.3, 429.7) = 5 35 49.54 -4 24 35.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 170.5 +/- 16.3
  Background counts = 5.4
  Rate = 0.006 +/- 0.0006

[Wed Jun 27 17:47:39 2012] Off-axis axis estimate = 13.56'
[Wed Jun 27 23:36:02 2012] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 23:36:02 2012] Initial guess for spatial extent in simple fitting = 13.21"
[Wed Jun 27 23:36:02 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.980
[Wed Jun 27 23:36:02 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 13.21"
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src23.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src23.csv
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src23.csv
[Thu Jun 28 02:41:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Jun 28 02:41:19 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Thu Jun 28 02:42:09 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 17.158711 pixels away
[Thu Jun 28 02:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:42:09 2012] Assessing source extent using major
[Thu Jun 28 02:42:09 2012] Source does appear to be extended
[Thu Jun 28 02:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 07:55:44 2012] Using EEF radius (= 13.21 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 07:55:44 2012] Initial guess for spatial extent in simple fitting = 13.21"
[Thu Jun 28 07:55:44 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.980
[Thu Jun 28 07:55:44 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 13.21"
[Thu Jun 28 11:02:55 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src23.ximg exists
[Thu Jun 28 11:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src23.csv
[Thu Jun 28 11:02:55 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src23_1.ximg exists
[Thu Jun 28 11:02:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src23.csv
[Thu Jun 28 11:02:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Thu Jun 28 11:02:56 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Thu Jun 28 11:04:08 2012] Spatial fit model total counts = 218.100000, observed total counts = 216.000000
[Thu Jun 28 11:04:08 2012] Offset between fit and detection position for source 5 = 0.145821 pixels
[Thu Jun 28 11:04:08 2012] 219.709000 total counts/ 105.070000 bgd. counts: snr = 11.183894
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.145821 pixels
  Position = (165.2, 429.6) = 5 35 49.56 -4 24 36.3
  Extent = 6.2 (4.1-7.9)", rotation angle = 0
  Source counts = 114.6 +/- 14.8
  Background counts = 105.1
  Rate = 0.004 +/- 0.0006
[Thu Jun 28 11:04:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:04:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:04:08 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 11:04:08 2012] Source does appear to be extended
[Thu Jun 28 11:04:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:11:31 2012] XMMSAS src. selection expression = ellipse(14325.441160, 37323.939600, 372.886479, 372.886479, 0.000000, X, Y)
[Thu Jun 28 15:11:31 2012] Writing source region out to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src5_src.reg
[Thu Jun 28 15:11:31 2012] Extracting stamp from image fullrun_mos2_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (144, 408) - (187, 451)
[Thu Jun 28 15:11:31 2012] XMMSAS bgd. selection expression = annulus(14325.441160, 37323.939600, 621.477465, 1242.954930, X, Y) && !ellipse(15192.963837, 35427.943054, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 15:11:31 2012] Writing fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src5.gif
[Thu Jun 28 15:19:28 2012] Mean detx,y = (-11008.68, -12375.68) 
[Thu Jun 28 15:19:29 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:19:42 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:19:42 2012] Setting source spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 28 15:19:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Jun 28 16:37:53 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:53 2012] Error reading totcts from fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Jun 28 16:37:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:56 2012] Using photon index=1.80, rate=0.00435, arf fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src5.arf
[Thu Jun 28 16:37:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:56 2012] Updating source flux to 1.4e-13