[Wed Jun 27 17:47:37 2012] Detection parameters:
  Position = (292.6, 156.1) = 5 35 12.51 -4 44 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1086.6 +/- 39.5
  Background counts = 9.1
  Rate = 0.04 +/- 0.001

[Wed Jun 27 17:47:39 2012] Off-axis axis estimate = 10.33'
[Wed Jun 27 23:36:02 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 23:36:02 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Wed Jun 27 23:36:02 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.048
[Wed Jun 27 23:36:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.59"
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src3.csv
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src3.csv
[Thu Jun 28 02:41:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jun 28 02:41:19 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jun 28 02:42:09 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 14.013158 pixels away
[Thu Jun 28 02:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:42:09 2012] Assessing source extent using major
[Thu Jun 28 02:42:09 2012] Source does appear to be extended
[Thu Jun 28 02:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 02:42:09 2012] Source is confused with source 1
[Thu Jun 28 07:55:44 2012] Using EEF radius (= 11.59 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 07:55:44 2012] Initial guess for spatial extent in simple fitting = 11.59"
[Thu Jun 28 07:55:44 2012] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.048
[Thu Jun 28 07:55:44 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 11.59"
[Thu Jun 28 11:02:54 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jun 28 11:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src3.csv
[Thu Jun 28 11:02:54 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jun 28 11:02:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src3.csv
[Thu Jun 28 11:02:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jun 28 11:02:56 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jun 28 11:04:08 2012] Warning, spatial fit 3 centroid is now closest to src. 1
[Thu Jun 28 11:04:08 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.178603 pixels away
[Thu Jun 28 11:04:08 2012] Source 28 is offset by 7.170417 and -5.335290 pixels which is larger than
2 X fitted extent = 1.365182 x 1.365182, not incorporating fit results
[Thu Jun 28 11:04:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:04:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:04:08 2012] Assessing source extent using major
[Thu Jun 28 11:04:08 2012] Source does appear to be extended
[Thu Jun 28 11:04:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:11:30 2012] Counts = 1086.559570, rescaling region sizes by 2.000000
[Thu Jun 28 15:11:30 2012] XMMSAS src. selection expression = ellipse(25406.994293, 13530.997803, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 28 15:11:30 2012] Writing source region out to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src28_src.reg
[Thu Jun 28 15:11:30 2012] Extracting stamp from image fullrun_mos2_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (218, 81) - (368, 231)
[Thu Jun 28 15:11:30 2012] XMMSAS bgd. selection expression = annulus(25406.994293, 13530.997803, 4350.000000, 8700.000000, X, Y) && !ellipse(24667.504000, 13202.718000, 404.688012, 404.688012, 0.000000, X, Y) && !ellipse(22161.734726, 14734.501343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21106.421460, 9834.470000, 536.406809, 536.406809, 0.000000, X, Y) && !ellipse(25866.404080, 18911.076000, 435.865613, 435.865613, 0.000000, X, Y) && !ellipse(24123.690100, 18228.331200, 393.233611, 393.233611, 0.000000, X, Y) && !ellipse(22472.730119, 16291.472135, 623.299954, 407.502241, 4.252654, X, Y) && !ellipse(29123.322800, 20192.920000, 343.907210, 343.907210, 0.000000, X, Y) && !ellipse(18609.004181, 9630.480988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22353.054400, 8656.144600, 686.239220, 227.811207, 8.736174, X, Y) && !ellipse(17293.187686, 18398.648677, 598.529754, 349.026034, 45.926926, X, Y) && !ellipse(32650.524872, 9661.095467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33756.740173, 16141.354904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20820.243380, 12794.206200, 370.152011, 370.152011, 0.000000, X, Y) && !ellipse(25031.838654, 15271.017715, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19308.237600, 14069.137600, 424.099212, 424.099212, 0.000000, X, Y) && !ellipse(17125.511000, 11765.337200, 389.170411, 389.170411, 0.000000, X, Y) && !ellipse(31764.793823, 9275.711327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23953.381100, 17390.905400, 473.763214, 322.086409, 26.398833, X, Y) && !ellipse(19076.629920, 21064.423000, 421.879523, 421.879523, 0.000000, X, Y) && !ellipse(34286.746179, 16101.747980, 351.708850, 243.536747, 319.675274, X, Y) && !ellipse(18832.690720, 18457.743000, 398.295211, 398.295211, 0.000000, X, Y) && !ellipse(22188.476181, 7942.635719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30028.839000, 11527.226200, 319.087516, 319.087516, 0.000000, X, Y) && !ellipse(23806.837341, 13010.175308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30559.418488, 8740.414276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17181.632553, 13988.560242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31467.342926, 18668.013535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20588.139380, 15719.906400, 336.368810, 336.368810, 0.000000, X, Y) && !ellipse(26230.699000, 17330.434800, 563.384816, 563.384816, 0.000000, X, Y) && !ellipse(27974.524000, 7765.612000, 2206.392063, 2206.392063, 0.000000, X, Y) && !ellipse(19702.991200, 17563.167600, 1020.968029, 1020.968029, 0.000000, X, Y) && !ellipse(25602.912000, 10994.173200, 418.640012, 418.640012, 0.000000, X, Y) && !ellipse(25193.154900, 4798.943800, 767.173622, 767.173622, 0.000000, X, Y) && !ellipse(27554.087280, 7805.136398, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31956.929400, 14315.856000, 1146.216033, 1146.216033, 0.000000, X, Y) && !ellipse(34950.462585, 14613.356339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34883.488200, 18444.004600, 801.520023, 260.833608, 304.241829, X, Y) && !ellipse(22764.170560, 5959.362000, 352.287210, 191.476806, 359.618259, X, Y) && !ellipse(27578.075470, 9176.771660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18326.475876, 5298.022102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27439.692688, 8314.018562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16860.683319, 8568.699593, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 15:11:30 2012] Writing fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src28.gif
[Thu Jun 28 15:12:12 2012] Mean detx,y = (1265.84, 10168.34) 
[Thu Jun 28 15:12:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:13:58 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:13:58 2012] Setting source spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 28 15:13:58 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Thu Jun 28 15:44:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 15:44:26 2012] rmf not generated due to insufficient counts
[Thu Jun 28 16:37:52 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:53 2012] Error reading totcts from fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Jun 28 16:37:55 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:55 2012] Using photon index=1.80, rate=0.0412, arf fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src28.arf
[Thu Jun 28 16:37:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:55 2012] Updating source flux to 9.2e-13
[Thu Jun 28 16:39:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting