[Wed Jun 27 17:47:37 2012] Detection parameters:
  Position = (277.8, 210.1) = 5 35 16.82 -4 40 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.9 +/- 18.1
  Background counts = 8.8
  Rate = 0.01 +/- 0.001

[Wed Jun 27 17:47:39 2012] Off-axis axis estimate = 6.58'
[Wed Jun 27 23:36:02 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 23:36:02 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Wed Jun 27 23:36:02 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.836
[Wed Jun 27 23:36:02 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.72"
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src12.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src12.csv
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src12.csv
[Thu Jun 28 02:41:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu Jun 28 02:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu Jun 28 02:41:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu Jun 28 02:41:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:42:09 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 13.126922 pixels away
[Thu Jun 28 02:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:42:09 2012] Assessing source extent using major
[Thu Jun 28 02:42:09 2012] Source does appear to be extended
[Thu Jun 28 02:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 07:55:44 2012] Using EEF radius (= 9.72 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 07:55:44 2012] Initial guess for spatial extent in simple fitting = 9.72"
[Thu Jun 28 07:55:44 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.836
[Thu Jun 28 07:55:44 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 9.72"
[Thu Jun 28 11:02:54 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src12.ximg exists
[Thu Jun 28 11:02:54 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src12_1.ximg exists
[Thu Jun 28 11:02:55 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src12 appears to have run properly
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Thu Jun 28 11:02:56 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Thu Jun 28 11:04:08 2012] Spatial fit model total counts = 251.513000, observed total counts = 269.000000
[Thu Jun 28 11:04:08 2012] Offset between fit and detection position for source 21 = 0.079829 pixels
[Thu Jun 28 11:04:08 2012] 258.447100 total counts/ 83.472100 bgd. counts: snr = 19.151612
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.079829 pixels
  Position = (277.8, 210.1) = 5 35 16.80 -4 40 31.2
  Extent = 4.9 (4.3-5.6)", rotation angle = 0
  Source counts = 175.0 +/- 16.1
  Background counts = 83.5
  Rate = 0.007 +/- 0.0006
[Thu Jun 28 11:04:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:04:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:04:08 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 11:04:08 2012] Source does appear to be extended
[Thu Jun 28 11:04:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:11:31 2012] XMMSAS src. selection expression = ellipse(24123.690100, 18228.331200, 294.925208, 294.925208, 0.000000, X, Y)
[Thu Jun 28 15:11:31 2012] Writing source region out to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src21_src.reg
[Thu Jun 28 15:11:31 2012] Extracting stamp from image fullrun_mos2_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (261, 193) - (295, 227)
[Thu Jun 28 15:11:31 2012] XMMSAS bgd. selection expression = annulus(24123.690100, 18228.331200, 491.542014, 983.084028, X, Y) && !ellipse(23953.381100, 17390.905400, 473.763214, 322.086409, 26.398833, X, Y)
[Thu Jun 28 15:11:31 2012] Writing fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src21.gif
[Thu Jun 28 15:16:09 2012] Mean detx,y = (143.29, 5356.81) 
[Thu Jun 28 15:16:10 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:16:23 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:16:23 2012] Setting source spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jun 28 15:16:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Thu Jun 28 16:37:53 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:53 2012] Error reading totcts from fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Thu Jun 28 16:37:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:56 2012] Using photon index=1.80, rate=0.00663, arf fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src21.arf
[Thu Jun 28 16:37:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:56 2012] Updating source flux to 1.6e-13