[Wed Jun 27 17:47:37 2012] Detection parameters:
  Position = (362.2, 379.0) = 5 34 52.26 -4 28 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.3 +/- 16.7
  Background counts = 7.1
  Rate = 0.007 +/- 0.0006

[Wed Jun 27 17:47:39 2012] Off-axis axis estimate = 7.45'
[Wed Jun 27 23:36:02 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 23:36:02 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Wed Jun 27 23:36:02 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.121
[Wed Jun 27 23:36:02 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 10.15"
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src22.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src22.csv
[Thu Jun 28 02:41:18 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src22_1.ximg exists
[Thu Jun 28 02:41:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src22.csv
[Thu Jun 28 02:41:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Thu Jun 28 02:41:19 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Thu Jun 28 02:41:19 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Thu Jun 28 02:42:09 2012] Source 11 is offset by -4.775500 and 0.986127 pixels which is larger than
2 X fitted extent = 1.122244 x 1.122244, not incorporating fit results
[Thu Jun 28 02:42:09 2012] Warning, spatial fit 22 centroid is now closest to src. 12
[Thu Jun 28 02:42:09 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:42:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:42:09 2012] Assessing source extent using major
[Thu Jun 28 02:42:09 2012] Source does appear to be extended
[Thu Jun 28 02:42:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 07:55:44 2012] Using EEF radius (= 10.15 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 07:55:44 2012] Initial guess for spatial extent in simple fitting = 10.15"
[Thu Jun 28 07:55:44 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.121
[Thu Jun 28 07:55:44 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 10.15"
[Thu Jun 28 11:02:55 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src22.ximg exists
[Thu Jun 28 11:02:55 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Jun 28 11:02:55 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_src22 appears to have run properly
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Jun 28 11:02:56 2012] fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Jun 28 11:02:56 2012] Fit fullrun_mos2_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Thu Jun 28 11:04:08 2012] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 13.085320 pixels away
[Thu Jun 28 11:04:08 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:04:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:04:08 2012] Assessing source extent using major
[Thu Jun 28 11:04:08 2012] Source does appear to be extended
[Thu Jun 28 11:04:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 15:11:31 2012] XMMSAS src. selection expression = ellipse(31463.113464, 32921.375031, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 15:11:31 2012] Writing source region out to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 28 15:11:31 2012] Extracting stamp from image fullrun_mos2_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (325, 341) - (400, 416)
[Thu Jun 28 15:11:31 2012] XMMSAS bgd. selection expression = annulus(31463.113464, 32921.375031, 1087.500000, 2175.000000, X, Y) && !ellipse(31124.061400, 31959.806400, 593.052017, 416.000012, 30.921426, X, Y) && !ellipse(33144.546800, 31985.098800, 380.706411, 380.706411, 0.000000, X, Y)
[Thu Jun 28 15:11:31 2012] Writing fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src11.gif
[Thu Jun 28 15:19:13 2012] Mean detx,y = (6332.50, -8907.59) 
[Thu Jun 28 15:19:14 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 15:19:25 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 15:19:25 2012] Setting source spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 28 15:19:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 28 16:22:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 16:22:00 2012] rmf not generated due to insufficient counts
[Thu Jun 28 16:37:53 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:53 2012] Error reading totcts from fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 28 16:37:56 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:56 2012] Using photon index=1.80, rate=0.00702, arf fullrun_mos2_xmm0049560301_pi300-10000_pass1_cl_src11.arf
[Thu Jun 28 16:37:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:56 2012] Updating source flux to 1.5e-13
[Thu Jun 28 16:39:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting