[Wed Jun 27 17:46:55 2012] Detection parameters:
  Position = (199.1, 211.8) = 5 35 39.70 -4 40 23.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 158.2 +/- 15.5
  Background counts = 7.3
  Rate = 0.01 +/- 0.001

[Wed Jun 27 17:46:56 2012] Off-axis axis estimate = 9.55'
[Wed Jun 27 21:06:09 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 21:06:09 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Wed Jun 27 21:06:09 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Wed Jun 27 21:06:09 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.21"
[Wed Jun 27 23:35:59 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jun 27 23:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src13.csv
[Wed Jun 27 23:35:59 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jun 27 23:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src13.csv
[Wed Jun 27 23:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 23:36:01 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jun 27 23:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 27 23:36:01 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jun 27 23:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jun 27 23:36:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:41:54 2012] Warning, spatial fit 13 centroid is now closest to src. 60
[Thu Jun 28 02:41:54 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:41:54 2012] Assessing source extent using major
[Thu Jun 28 02:41:54 2012] Source does appear to be extended
[Thu Jun 28 02:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 05:47:11 2012] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 05:47:11 2012] Initial guess for spatial extent in simple fitting = 11.21"
[Thu Jun 28 05:47:11 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.951
[Thu Jun 28 05:47:11 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.21"
[Thu Jun 28 07:55:42 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 28 07:55:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src13.csv
[Thu Jun 28 07:55:42 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 28 07:55:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src13.csv
[Thu Jun 28 07:55:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 07:55:43 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 28 07:55:43 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 28 07:55:43 2012] Fit fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Thu Jun 28 11:03:46 2012] Spatial fit model total counts = 205.419000, observed total counts = 211.000000
[Thu Jun 28 11:03:46 2012] Offset between fit and detection position for source 62 = 0.217671 pixels
[Thu Jun 28 11:03:46 2012] 203.092400 total counts/ 83.978400 bgd. counts: snr = 12.998074
Spatial fit parameters:
  Offset between fit and detection position for source 62 = 0.217671 pixels
  Position = (199.1, 211.6) = 5 35 39.70 -4 40 24.6
  Extent = 5.7 (4.9-6.7)", rotation angle = 0
  Source counts = 119.1 +/- 14.3
  Background counts = 84.0
  Rate = 0.005 +/- 0.0005
[Thu Jun 28 11:03:46 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:03:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:03:46 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 11:03:46 2012] Source does appear to be extended
[Thu Jun 28 11:03:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 13:50:32 2012] XMMSAS src. selection expression = ellipse(17276.880400, 18358.339000, 342.564610, 342.564610, 0.000000, X, Y)
[Thu Jun 28 13:50:32 2012] Writing source region out to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src62_src.reg
[Thu Jun 28 13:50:32 2012] Extracting stamp from image fullrun_mos1_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (179, 192) - (219, 231)
[Thu Jun 28 13:50:32 2012] XMMSAS bgd. selection expression = annulus(17276.880400, 18358.339000, 570.941016, 1141.882033, X, Y)
[Thu Jun 28 13:50:32 2012] Writing fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src62.gif
[Thu Jun 28 13:55:51 2012] Mean detx,y = (5861.10, 6593.04) 
[Thu Jun 28 13:55:54 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 13:56:16 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 13:56:16 2012] Setting source spectrum file to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Thu Jun 28 13:56:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Thu Jun 28 16:37:50 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:50 2012] Error reading totcts from fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Thu Jun 28 16:37:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:51 2012] Using photon index=1.80, rate=0.00452, arf fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src62.arf
[Thu Jun 28 16:37:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:51 2012] Updating source flux to 9.4e-14