[Wed Jun 27 17:46:54 2012] Detection parameters:
  Position = (277.7, 210.4) = 5 35 16.86 -4 40 30.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 271.8 +/- 20.0
  Background counts = 10.2
  Rate = 0.02 +/- 0.001

[Wed Jun 27 17:46:56 2012] Off-axis axis estimate = 6.56'
[Wed Jun 27 21:06:09 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 21:06:09 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Wed Jun 27 21:06:09 2012] source mask rpix=2.2, npix_max = 29, mask sum = 18, frac = 0.603
[Wed Jun 27 21:06:09 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 9.71"
[Wed Jun 27 23:35:59 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jun 27 23:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src10.csv
[Wed Jun 27 23:35:59 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jun 27 23:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src10.csv
[Wed Jun 27 23:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 23:36:00 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jun 27 23:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun 27 23:36:00 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jun 27 23:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jun 27 23:36:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 02:41:54 2012] Warning, spatial fit 10 centroid is now closest to src. 63
[Thu Jun 28 02:41:54 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:41:54 2012] Assessing source extent using major
[Thu Jun 28 02:41:54 2012] Source does appear to be extended
[Thu Jun 28 02:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 05:47:11 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 05:47:11 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Thu Jun 28 05:47:11 2012] source mask rpix=2.2, npix_max = 29, mask sum = 18, frac = 0.603
[Thu Jun 28 05:47:11 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 9.71"
[Thu Jun 28 07:55:42 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src10.ximg exists
[Thu Jun 28 07:55:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src10.csv
[Thu Jun 28 07:55:42 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Jun 28 07:55:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src10.csv
[Thu Jun 28 07:55:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 07:55:43 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Jun 28 07:55:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun 28 07:55:43 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Jun 28 07:55:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src10.csv
[Thu Jun 28 07:55:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 28 11:03:46 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 15 at 11.717177 pixels away
[Thu Jun 28 11:03:46 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:03:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:03:46 2012] Assessing source extent using major
[Thu Jun 28 11:03:46 2012] Source does appear to be extended
[Thu Jun 28 11:03:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 13:50:32 2012] XMMSAS src. selection expression = ellipse(24107.163635, 18253.392212, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 28 13:50:32 2012] Writing source region out to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src15_src.reg
[Thu Jun 28 13:50:32 2012] Extracting stamp from image fullrun_mos1_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (240, 173) - (315, 248)
[Thu Jun 28 13:50:32 2012] XMMSAS bgd. selection expression = annulus(24107.163635, 18253.392212, 1087.500000, 2175.000000, X, Y) && !ellipse(25858.411800, 18904.478000, 367.723211, 367.723211, 0.000000, X, Y) && !ellipse(22470.974800, 16311.613400, 453.900813, 453.900813, 0.000000, X, Y) && !ellipse(25021.428284, 15271.508896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23983.463520, 17417.526400, 422.452812, 422.452812, 0.000000, X, Y) && !ellipse(26248.373200, 17335.289380, 1126.240032, 1126.240032, 0.000000, X, Y)
[Thu Jun 28 13:50:32 2012] Writing fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src15.gif
[Thu Jun 28 13:54:32 2012] Mean detx,y = (5836.64, -159.98) 
[Thu Jun 28 13:54:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 13:55:00 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 13:55:00 2012] Setting source spectrum file to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 28 13:55:00 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Jun 28 14:34:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 28 14:34:54 2012] rmf not generated due to insufficient counts
[Thu Jun 28 16:37:50 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:50 2012] Error reading totcts from fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Jun 28 16:37:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:51 2012] Using photon index=1.80, rate=0.0158, arf fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src15.arf
[Thu Jun 28 16:37:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:51 2012] Updating source flux to 2.9e-13
[Thu Jun 28 16:38:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting