[Wed Jun 27 17:46:54 2012] Detection parameters:
  Position = (283.3, 152.2) = 5 35 15.21 -4 44 42.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2115.0 +/- 54.5
  Background counts = 10.2
  Rate = 0.2 +/- 0.004

[Wed Jun 27 17:46:56 2012] Off-axis axis estimate = 10.66'
[Wed Jun 27 21:06:09 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Wed Jun 27 21:06:09 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jun 27 21:06:09 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Wed Jun 27 21:06:09 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.877
[Wed Jun 27 21:06:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.76"
[Wed Jun 27 23:35:59 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Jun 27 23:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 23:35:59 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Jun 27 23:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src1.csv
[Wed Jun 27 23:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 27 23:36:00 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Jun 27 23:36:00 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Jun 27 23:36:00 2012] Fit fullrun_mos1_xmm0049560301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun 28 02:41:54 2012] Warning, spatial fit 1 centroid is now closest to src. 72
[Thu Jun 28 02:41:54 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 02:41:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 02:41:54 2012] Assessing source extent using major
[Thu Jun 28 02:41:54 2012] Source does appear to be extended
[Thu Jun 28 02:41:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 05:47:11 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Thu Jun 28 05:47:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 28 05:47:11 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Thu Jun 28 05:47:11 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.877
[Thu Jun 28 05:47:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.76"
[Thu Jun 28 07:55:42 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 28 07:55:42 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 28 07:55:42 2012] Fit fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_src1 appears to have run properly
[Thu Jun 28 07:55:43 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 28 07:55:43 2012] fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 28 07:55:43 2012] Fit fullrun_mos1_xmm0049560301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun 28 11:03:46 2012] Spatial fit model total counts = 3127.360000, observed total counts = 3118.000000
[Thu Jun 28 11:03:46 2012] Offset between fit and detection position for source 1 = 0.143385 pixels
[Thu Jun 28 11:03:46 2012] 3180.590000 total counts/ 1692.860000 bgd. counts: snr = 36.158766
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.143385 pixels
  Position = (283.3, 152.3) = 5 35 15.21 -4 44 42.4
  Extent = 6.4 (6.1-6.7)", rotation angle = 0
  Source counts = 1487.7 +/- 56.4
  Background counts = 1692.9
  Rate = 0.06 +/- 0.002
[Thu Jun 28 11:03:46 2012] Vigneting correction estimate = 1.000000
[Thu Jun 28 11:03:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 28 11:03:46 2012] Assessing source extent using major axis lower bound
[Thu Jun 28 11:03:46 2012] Source does appear to be extended
[Thu Jun 28 11:03:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 28 13:50:31 2012] Counts = 1487.730000, rescaling region sizes by 2.000000
[Thu Jun 28 13:50:31 2012] XMMSAS src. selection expression = ellipse(24601.274000, 13203.175000, 766.740022, 766.740022, 0.000000, X, Y)
[Thu Jun 28 13:50:31 2012] Writing source region out to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 28 13:50:31 2012] Extracting stamp from image fullrun_mos1_xmm0049560301_pi300-10000_cl_sm2.00.img.gz, (239, 108) - (327, 196)
[Thu Jun 28 13:50:31 2012] XMMSAS bgd. selection expression = annulus(24601.274000, 13203.175000, 2555.800074, 5111.600147, X, Y) && !ellipse(25408.864000, 13552.614400, 443.540013, 443.540013, 0.000000, X, Y) && !ellipse(22159.511139, 14740.645081, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21105.632800, 9827.992000, 724.652021, 383.161611, 11.911708, X, Y) && !ellipse(24107.163635, 18253.392212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19268.723206, 14071.476807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22470.974800, 16311.613400, 453.900813, 453.900813, 0.000000, X, Y) && !ellipse(22344.771118, 8651.530533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23771.636963, 13025.792191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20801.875000, 12801.822400, 727.803221, 459.416013, 199.438000, X, Y) && !ellipse(25021.428284, 15271.508896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22176.726600, 7948.634000, 338.752010, 338.752010, 0.000000, X, Y) && !ellipse(27689.100000, 7811.615600, 346.508010, 346.508010, 0.000000, X, Y) && !ellipse(24136.374092, 11979.865272, 578.575133, 242.428748, 165.519413, X, Y) && !ellipse(23983.463520, 17417.526400, 422.452812, 422.452812, 0.000000, X, Y) && !ellipse(30070.939860, 11585.452200, 699.684820, 354.465610, 341.065200, X, Y) && !ellipse(26248.373200, 17335.289380, 1126.240032, 1126.240032, 0.000000, X, Y) && !ellipse(27615.598588, 9198.336860, 539.602552, 244.028289, 349.019039, X, Y) && !ellipse(28147.908478, 7637.351822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25687.256531, 10992.542213, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 28 13:50:31 2012] Writing fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1.gif
[Thu Jun 28 13:50:37 2012] Mean detx,y = (10423.72, -1113.77) 
[Thu Jun 28 13:50:38 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 28 13:51:15 2012] Binned source spectrum to 10 counts/bin
[Thu Jun 28 13:51:16 2012] Setting source spectrum file to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 13:51:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 28 16:37:49 2012] Updating aperture counts using extracted products
[Thu Jun 28 16:37:49 2012] Error reading totcts from fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 28 16:37:51 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:37:51 2012] Using photon index=1.80, rate=0.0564, arf fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 16:37:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:37:51 2012] Updating source flux to 1.2e-12
[Thu Jun 28 16:39:47 2012] Reading fit data from xmm0049560301/analysis//spectral/fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun 28 16:39:47 2012] Spectral fit parameter nH value = 2.10381e+21
[Thu Jun 28 16:39:47 2012] Spectral fit parameter PhoIndex value = 3.04401
[Thu Jun 28 16:39:47 2012] Failed to get F(0.3-8.0) from xmm0049560301/analysis//spectral/fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun 28 16:39:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun 28 16:39:47 2012] Using Nh = 2.1e+21, photon index=3.04, rate=0.0564, arf fullrun_mos1_xmm0049560301_pi300-10000_pass1_cl_src1.arf
[Thu Jun 28 16:39:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 28 16:39:47 2012] Updating source flux to 8.7e-13