[Sat Jun 23 05:39:12 2012] Detection parameters:
  Position = (375.7, 341.8) = 16 33 42.44 57 11 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.1 +/- 23.6
  Background counts = 73.5
  Rate = 0.01 +/- 0.001

[Sat Jun 23 05:39:13 2012] Off-axis axis estimate = 6.42'
[Sat Jun 23 05:41:31 2012] Using EEF radius (= 9.64 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 05:41:31 2012] Initial guess for spatial extent in simple fitting = 9.64"
[Sat Jun 23 05:41:31 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.017
[Sat Jun 23 05:41:31 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 9.64"
[Sat Jun 23 06:21:51 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun 23 06:21:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src17.csv
[Sat Jun 23 06:21:51 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun 23 06:21:51 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src17.csv
[Sat Jun 23 06:21:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 06:21:51 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun 23 06:21:51 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun 23 06:21:51 2012] Fit fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Jun 23 06:58:49 2012] Spatial fit model total counts = 372.851000, observed total counts = 363.000000
[Sat Jun 23 06:58:49 2012] Offset between fit and detection position for source 19 = 0.081495 pixels
[Sat Jun 23 06:58:49 2012] 371.620000 total counts/ 229.516000 bgd. counts: snr = 9.379935
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.081495 pixels
  Position = (375.6, 341.8) = 16 33 42.47 57 11 16.3
  Extent = 5.6 (4.8-6.6)", rotation angle = 0
  Source counts = 142.1 +/- 19.3
  Background counts = 229.5
  Rate = 0.009 +/- 0.001
[Sat Jun 23 06:58:49 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 06:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 06:58:49 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 06:58:49 2012] Source does appear to be extended
[Sat Jun 23 06:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 06:59:04 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 23 06:59:04 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Sat Jun 23 06:59:04 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Sat Jun 23 06:59:04 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 5.64"
[Sat Jun 23 07:36:27 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src16.ximg exists
[Sat Jun 23 07:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src16.csv
[Sat Jun 23 07:36:27 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src16_1.ximg exists
[Sat Jun 23 07:36:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src16.csv
[Sat Jun 23 07:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 07:36:28 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sat Jun 23 07:36:28 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sat Jun 23 07:36:28 2012] Fit fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sat Jun 23 08:14:53 2012] Spatial fit model total counts = 378.079000, observed total counts = 371.000000
[Sat Jun 23 08:14:53 2012] Offset between fit and detection position for source 19 = 0.013831 pixels
[Sat Jun 23 08:14:53 2012] 378.031000 total counts/ 237.890000 bgd. counts: snr = 9.086092
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.013831 pixels
  Position = (375.6, 341.8) = 16 33 42.47 57 11 16.3
  Extent = 5.5 (4.8-6.6)", rotation angle = 0
  Source counts = 140.1 +/- 19.4
  Background counts = 237.9
  Rate = 0.008 +/- 0.001
[Sat Jun 23 08:14:53 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 08:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 08:14:53 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 08:14:53 2012] Source does appear to be extended
[Sat Jun 23 08:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 08:15:07 2012] XMMSAS src. selection expression = ellipse(32631.677200, 29685.595360, 331.683010, 331.683010, 0.000000, X, Y)
[Sat Jun 23 08:15:07 2012] Writing source region out to fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src19_src.reg
[Sat Jun 23 08:15:07 2012] Extracting stamp from image fullrun_pn_xmm0049540401_pi300-10000_cl_sm2.00.img.gz, (357, 323) - (395, 361)
[Sat Jun 23 08:15:07 2012] XMMSAS bgd. selection expression = annulus(32631.677200, 29685.595360, 552.805016, 1105.610032, X, Y) && !ellipse(30821.233582, 30990.563385, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 08:15:07 2012] Writing fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src19.gif
[Sat Jun 23 08:26:51 2012] Mean detx,y = (6432.57, -266.34) 
[Sat Jun 23 08:26:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 08:27:06 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 08:27:06 2012] Setting source spectrum file to fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun 23 08:27:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Jun 23 09:28:06 2012] Updating aperture counts using extracted products
[Sat Jun 23 09:28:06 2012] Error reading totcts from fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Sat Jun 23 09:28:07 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 09:28:07 2012] Using photon index=1.80, rate=0.00843, arf fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src19.arf
[Sat Jun 23 09:28:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 09:28:07 2012] Updating source flux to 3.2e-14