[Sat Jun 23 05:39:12 2012] Detection parameters:
  Position = (358.1, 407.4) = 16 33 51.78 57 16 2.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.8 +/- 16.9
  Background counts = 65.8
  Rate = 0.008 +/- 0.001

[Sat Jun 23 05:39:13 2012] Off-axis axis estimate = 9.01'
[Sat Jun 23 05:41:31 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 05:41:31 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Sat Jun 23 05:41:31 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Sat Jun 23 05:41:31 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.93"
[Sat Jun 23 06:21:50 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 23 06:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src11.csv
[Sat Jun 23 06:21:50 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 23 06:21:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src11.csv
[Sat Jun 23 06:21:50 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 06:21:51 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 23 06:21:51 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 23 06:21:51 2012] Fit fullrun_pn_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Jun 23 06:58:49 2012] Warning, spatial fit 11 centroid is now closest to src. 14
[Sat Jun 23 06:58:49 2012] Source 13 is offset by -0.732885 and -8.452825 pixels which is larger than
2 X fitted extent = 1.229172 x 1.229172, not incorporating fit results
[Sat Jun 23 06:58:49 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 06:58:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 06:58:49 2012] Assessing source extent using major
[Sat Jun 23 06:58:49 2012] Source does appear to be extended
[Sat Jun 23 06:58:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 06:59:04 2012] Using EEF radius (= 10.93 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 06:59:04 2012] Initial guess for spatial extent in simple fitting = 10.93"
[Sat Jun 23 06:59:04 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.991
[Sat Jun 23 06:59:04 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 10.93"
[Sat Jun 23 07:36:27 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 23 07:36:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src10.csv
[Sat Jun 23 07:36:27 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 23 07:36:27 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src10.csv
[Sat Jun 23 07:36:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 07:36:28 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 23 07:36:28 2012] fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 23 07:36:28 2012] Fit fullrun_pn_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sat Jun 23 08:14:53 2012] Spatial fit model total counts = 333.074000, observed total counts = 332.000000
[Sat Jun 23 08:14:53 2012] Offset between fit and detection position for source 13 = 0.093734 pixels
[Sat Jun 23 08:14:53 2012] 320.210700 total counts/ 282.824000 bgd. counts: snr = 2.223100
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.093734 pixels
  Position = (358.1, 407.3) = 16 33 51.78 57 16 1.4
  Extent = 4.1 (2.8-5.4)", rotation angle = 0
  Source counts = 37.4 +/- 17.9
  Background counts = 282.8
  Rate = 0.002 +/- 0.001
[Sat Jun 23 08:14:53 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 08:14:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 08:14:53 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 08:14:53 2012] Source does appear to be extended
[Sat Jun 23 08:14:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 08:15:07 2012] XMMSAS src. selection expression = ellipse(31106.492120, 35385.457200, 245.512207, 245.512207, 0.000000, X, Y)
[Sat Jun 23 08:15:07 2012] Writing source region out to fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 23 08:15:07 2012] Extracting stamp from image fullrun_pn_xmm0049540401_pi300-10000_cl_sm2.00.img.gz, (344, 393) - (372, 421)
[Sat Jun 23 08:15:07 2012] XMMSAS bgd. selection expression = annulus(31106.492120, 35385.457200, 409.187012, 818.374024, X, Y) && !ellipse(30286.675000, 35156.930800, 419.999212, 419.999212, 0.000000, X, Y)
[Sat Jun 23 08:15:07 2012] Writing fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src13.gif
[Sat Jun 23 08:24:16 2012] Mean detx,y = (6566.61, -6156.93) 
[Sat Jun 23 08:24:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 08:24:26 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 08:24:26 2012] Setting source spectrum file to fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 23 08:24:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun 23 08:49:56 2012] Not generating rmf since there are only 37 counts
[Sat Jun 23 08:49:56 2012] rmf not generated due to insufficient counts
[Sat Jun 23 09:28:06 2012] Updating aperture counts using extracted products
[Sat Jun 23 09:28:06 2012] Error reading totcts from fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 23 09:28:07 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 09:28:07 2012] Using photon index=1.80, rate=0.00225, arf fullrun_pn_xmm0049540401_pi300-10000_pass1_cl_src13.arf
[Sat Jun 23 09:28:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 09:28:07 2012] Updating source flux to 1.2e-14
[Sat Jun 23 09:28:33 2012] Flag b found in src. 13 procflags, skipping spectral fitting
[Sat Jun 23 09:28:33 2012] Source 13 has fewer than 100.000000 counts, skipping spectral fitting