[Sat Jun 23 05:39:48 2012] Detection parameters:
  Position = (305.5, 321.2) = 16 34 19.99 57 9 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3827.4 +/- 73.3
  Background counts = 32.0
  Rate = 0.1 +/- 0.003

[Sat Jun 23 05:39:49 2012] Off-axis axis estimate = 1.73'
[Sat Jun 23 06:40:25 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 06:40:25 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 23 06:40:25 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sat Jun 23 06:40:25 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sat Jun 23 06:58:43 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 23 06:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 06:58:43 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 23 06:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_src1.csv
[Sat Jun 23 06:58:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 06:58:43 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 23 06:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 06:58:43 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 23 06:58:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 23 06:58:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 06:58:55 2012] Warning, spatial fit 1 centroid is now closest to src. 11
[Sat Jun 23 06:58:55 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 06:58:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 06:58:55 2012] Assessing source extent using major
[Sat Jun 23 06:58:55 2012] Source does appear to be extended
[Sat Jun 23 06:58:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 07:52:48 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 07:52:48 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sat Jun 23 07:52:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sat Jun 23 07:52:48 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Sat Jun 23 08:14:47 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 23 08:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 08:14:47 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 23 08:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_src1.csv
[Sat Jun 23 08:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 08:14:47 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 23 08:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 08:14:47 2012] fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 23 08:14:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 23 08:14:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 08:14:58 2012] Source 1 is offset by -6.192003 and -7.532854 pixels which is larger than
2 X fitted extent = 0.838129 x 0.838129, not incorporating fit results
[Sat Jun 23 08:14:58 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 08:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 08:14:58 2012] Assessing source extent using major
[Sat Jun 23 08:14:58 2012] Source does appear to be extended
[Sat Jun 23 08:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 09:15:45 2012] Counts = 3827.423096, rescaling region sizes by 2.000000
[Sat Jun 23 09:15:45 2012] XMMSAS src. selection expression = ellipse(26531.133698, 27893.479675, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sat Jun 23 09:15:45 2012] Writing source region out to fullrun_mos2_xmm0049540401_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 23 09:15:45 2012] Extracting stamp from image fullrun_mos2_xmm0049540401_pi300-10000_cl_sm2.00.img.gz, (231, 246) - (381, 396)
[Sat Jun 23 09:15:45 2012] XMMSAS bgd. selection expression = annulus(26531.133698, 27893.479675, 4350.000000, 8700.000000, X, Y) && !ellipse(34380.725159, 22551.236816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30429.865400, 27411.054400, 385.522411, 385.522411, 0.000000, X, Y) && !ellipse(29269.506422, 23186.452000, 338.174410, 338.174410, 0.000000, X, Y) && !ellipse(30318.753357, 35104.849884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26890.502400, 32002.536400, 430.038412, 430.038412, 0.000000, X, Y) && !ellipse(32639.169000, 29651.778400, 353.764010, 353.764010, 0.000000, X, Y) && !ellipse(29092.692688, 23737.997742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20638.691200, 21711.589600, 630.305618, 130.504004, 22.621318, X, Y) && !ellipse(26812.208374, 27107.410461, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 23 09:15:45 2012] Writing fullrun_mos2_xmm0049540401_pi300-10000_pass1_cl_src1.gif
[Sat Jun 23 09:15:48 2012] Mean detx,y = (90.12, 100.38) 
[Sat Jun 23 09:15:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 09:18:11 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 09:18:11 2012] Setting source spectrum file to fullrun_mos2_xmm0049540401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 09:18:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049540401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 23 09:22:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 09:22:20 2012] rmf not generated due to insufficient counts
[Sat Jun 23 09:28:08 2012] Updating aperture counts using extracted products
[Sat Jun 23 09:28:08 2012] Error reading totcts from fullrun_mos2_xmm0049540401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 23 09:28:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 09:28:08 2012] Using photon index=1.80, rate=0.146, arf fullrun_mos2_xmm0049540401_pi300-10000_pass1_cl_src1.arf
[Sat Jun 23 09:28:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 09:28:08 2012] Updating source flux to 1.4e-12
[Sat Jun 23 09:28:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 23 09:28:33 2012] xmm0049540401/analysis//spectral/fullrun_mos2_xmm0049540401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete