[Sat Jun 23 05:39:30 2012] Detection parameters:
  Position = (349.1, 404.5) = 16 33 56.59 57 15 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.7 +/- 13.4
  Background counts = 31.3
  Rate = 0.005 +/- 0.0007

[Sat Jun 23 05:39:30 2012] Off-axis axis estimate = 8.52'
[Sat Jun 23 06:21:51 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 06:21:51 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Sat Jun 23 06:21:51 2012] source mask rpix=2.5, npix_max = 34, mask sum = 30, frac = 0.858
[Sat Jun 23 06:21:51 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.69"
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 23 06:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 23 06:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src5.csv
[Sat Jun 23 06:40:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 23 06:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 23 06:40:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 23 06:40:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 06:58:52 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 14.181626 pixels away
[Sat Jun 23 06:58:52 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 06:58:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 06:58:52 2012] Assessing source extent using major
[Sat Jun 23 06:58:52 2012] Source does appear to be extended
[Sat Jun 23 06:58:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 07:36:28 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 07:36:28 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Sat Jun 23 07:36:28 2012] source mask rpix=2.5, npix_max = 34, mask sum = 30, frac = 0.858
[Sat Jun 23 07:36:28 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.69"
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 23 07:52:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src5.csv
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 23 07:52:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src5.csv
[Sat Jun 23 07:52:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 23 07:52:48 2012] Fit fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jun 23 08:14:56 2012] Spatial fit model total counts = 196.586000, observed total counts = 181.000000
[Sat Jun 23 08:14:56 2012] Offset between fit and detection position for source 8 = 0.109169 pixels
[Sat Jun 23 08:14:56 2012] 196.083900 total counts/ 139.270000 bgd. counts: snr = 4.814219
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.109169 pixels
  Position = (349.1, 404.4) = 16 33 56.61 57 15 48.9
  Extent = 4.3 (3.2-5.4)", rotation angle = 0
  Source counts = 56.8 +/- 14.0
  Background counts = 139.3
  Rate = 0.002 +/- 0.0006
[Sat Jun 23 08:14:56 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 08:14:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 08:14:56 2012] Assessing source extent using major axis lower bound
[Sat Jun 23 08:14:56 2012] Source does appear to be extended
[Sat Jun 23 08:14:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 09:00:17 2012] XMMSAS src. selection expression = ellipse(30322.840580, 35132.641600, 260.875208, 260.875208, 0.000000, X, Y)
[Sat Jun 23 09:00:17 2012] Writing source region out to fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src8_src.reg
[Sat Jun 23 09:00:17 2012] Extracting stamp from image fullrun_mos1_xmm0049540401_pi300-10000_cl_sm2.00.img.gz, (334, 389) - (364, 419)
[Sat Jun 23 09:00:17 2012] XMMSAS bgd. selection expression = annulus(30322.840580, 35132.641600, 434.792013, 869.584025, X, Y)
[Sat Jun 23 09:00:17 2012] Writing fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src8.gif
[Sat Jun 23 09:01:33 2012] Mean detx,y = (6223.89, 5411.04) 
[Sat Jun 23 09:01:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 09:01:49 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 09:01:49 2012] Setting source spectrum file to fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 23 09:01:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jun 23 09:14:12 2012] Not generating rmf since there are only 56 counts
[Sat Jun 23 09:14:12 2012] rmf not generated due to insufficient counts
[Sat Jun 23 09:28:07 2012] Updating aperture counts using extracted products
[Sat Jun 23 09:28:07 2012] Error reading totcts from fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 23 09:28:07 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 09:28:07 2012] Using photon index=1.80, rate=0.00241, arf fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src8.arf
[Sat Jun 23 09:28:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 09:28:07 2012] Updating source flux to 4.1e-14
[Sat Jun 23 09:28:09 2012] Source 8 has fewer than 100.000000 counts, skipping spectral fitting