[Sat Jun 23 05:39:29 2012] Detection parameters:
  Position = (436.9, 334.0) = 16 33 9.68 57 10 41.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 649.4 +/- 31.6
  Background counts = 29.3
  Rate = 0.04 +/- 0.002

[Sat Jun 23 05:39:30 2012] Off-axis axis estimate = 10.37'
[Sat Jun 23 06:21:51 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 06:21:51 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 06:21:51 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Sat Jun 23 06:21:51 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Sat Jun 23 06:21:51 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.61"
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src2.ximg exists
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Jun 23 06:40:25 2012] Fit fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_src2 appears to have run properly
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Jun 23 06:40:25 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Jun 23 06:40:25 2012] Fit fullrun_mos1_xmm0049540401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Jun 23 06:58:52 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.207431 pixels away
[Sat Jun 23 06:58:52 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 06:58:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 06:58:52 2012] Assessing source extent using major
[Sat Jun 23 06:58:52 2012] Source does appear to be extended
[Sat Jun 23 06:58:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 07:36:28 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Sat Jun 23 07:36:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 23 07:36:28 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Sat Jun 23 07:36:28 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Sat Jun 23 07:36:28 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.61"
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src2.ximg exists
[Sat Jun 23 07:52:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src2.csv
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Jun 23 07:52:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src2.csv
[Sat Jun 23 07:52:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Jun 23 07:52:48 2012] fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Jun 23 07:52:48 2012] Fit fullrun_mos1_xmm0049540401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Jun 23 08:14:56 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.750322 pixels away
[Sat Jun 23 08:14:56 2012] Vigneting correction estimate = 1.000000
[Sat Jun 23 08:14:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 23 08:14:56 2012] Assessing source extent using major
[Sat Jun 23 08:14:56 2012] Source does appear to be extended
[Sat Jun 23 08:14:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 23 09:00:17 2012] XMMSAS src. selection expression = ellipse(37963.626129, 29010.548737, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 23 09:00:17 2012] Writing source region out to fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src3_src.reg
[Sat Jun 23 09:00:17 2012] Extracting stamp from image fullrun_mos1_xmm0049540401_pi300-10000_cl_sm2.00.img.gz, (399, 297) - (474, 372)
[Sat Jun 23 09:00:17 2012] XMMSAS bgd. selection expression = annulus(37963.626129, 29010.548737, 1087.500000, 2175.000000, X, Y)
[Sat Jun 23 09:00:17 2012] Writing fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src3.gif
[Sat Jun 23 09:00:35 2012] Mean detx,y = (-1750.09, 11039.16) 
[Sat Jun 23 09:00:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 23 09:00:50 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 23 09:00:50 2012] Setting source spectrum file to fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 09:00:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jun 23 09:10:04 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 23 09:10:04 2012] rmf not generated due to insufficient counts
[Sat Jun 23 09:28:07 2012] Updating aperture counts using extracted products
[Sat Jun 23 09:28:07 2012] Error reading totcts from fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jun 23 09:28:07 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 23 09:28:07 2012] Using photon index=1.80, rate=0.0421, arf fullrun_mos1_xmm0049540401_pi300-10000_pass1_cl_src3.arf
[Sat Jun 23 09:28:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 23 09:28:07 2012] Updating source flux to 6.7e-13
[Sat Jun 23 09:28:09 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting