[Mon May  6 17:50:08 2013] Detection parameters:
  Position = (307.6, 310.2) = 16 34 18.59 57 8 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 44.7 +/- 11.9
  Background counts = 26.6
  Rate = 0.002 +/- 0.0005

[Mon May  6 17:50:08 2013] Off-axis axis estimate = 1.08'
[Mon May  6 18:26:34 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Mon May  6 18:26:34 2013] Initial guess for spatial extent in simple fitting = 6.97"
[Mon May  6 18:26:34 2013] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.735
[Mon May  6 18:26:34 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 6.97"
[Mon May  6 18:58:28 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_src25.ximg exists
[Mon May  6 18:58:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_src25.csv
[Mon May  6 18:58:28 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon May  6 18:58:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_src25.csv
[Mon May  6 18:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 18:58:28 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon May  6 18:58:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon May  6 18:58:28 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon May  6 18:58:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon May  6 18:58:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049540301_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 18:58:36 2013] Warning, spatial fit 25 centroid is now closest to src. 17
[Mon May  6 18:58:36 2013] Vigneting correction estimate = 1.000000
[Mon May  6 18:58:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 18:58:36 2013] Assessing source extent using major
[Mon May  6 18:58:36 2013] Source does appear to be extended
[Mon May  6 18:58:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 19:30:45 2013] Using EEF radius (= 6.97 ")to estimate initial spatial extent for simple fitting
[Mon May  6 19:30:45 2013] Initial guess for spatial extent in simple fitting = 6.97"
[Mon May  6 19:30:45 2013] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.735
[Mon May  6 19:30:45 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 6.97"
[Mon May  6 19:58:24 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass1_src22.ximg exists
[Mon May  6 19:58:24 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass1_src22_1.ximg exists
[Mon May  6 19:58:24 2013] Fit fullrun_mos2_xmm0049540301_pi300-10000_cl_pass1_src22 appears to have run properly
[Mon May  6 19:58:24 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Mon May  6 19:58:24 2013] fullrun_mos2_xmm0049540301_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Mon May  6 19:58:24 2013] Fit fullrun_mos2_xmm0049540301_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Mon May  6 19:58:32 2013] Spatial fit model total counts = 664.355000, observed total counts = 644.000000
[Mon May  6 19:58:32 2013] Offset between fit and detection position for source 18 = 7.186518 pixels
[Mon May  6 19:58:32 2013] 686.535000 total counts/ 561.134000 bgd. counts: snr = 5.293802
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 7.186518 pixels
  Position = (312.0, 304.6) = 16 34 16.20 57 8 36.9
  Extent = 13.9 (13.6-27.9)", rotation angle = 0
  Source counts = 125.4 +/- 26.2
  Background counts = 561.1
  Rate = 0.005 +/- 0.001
[Mon May  6 19:58:32 2013] Vigneting correction estimate = 1.000000
[Mon May  6 19:58:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 19:58:32 2013] Assessing source extent using major axis lower bound
[Mon May  6 19:58:32 2013] Source does appear to be extended
[Mon May  6 19:58:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 20:52:57 2013] XMMSAS src. selection expression = ellipse(27099.592000, 26450.942000, 836.340024, 836.340024, 0.000000, X, Y)
[Mon May  6 20:52:57 2013] Writing source region out to fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18_src.reg
[Mon May  6 20:52:57 2013] Extracting stamp from image fullrun_mos2_xmm0049540301_pi300-10000_cl_sm2.00.img.gz, (264, 257) - (360, 353)
[Mon May  6 20:52:57 2013] XMMSAS bgd. selection expression = annulus(27099.592000, 26450.942000, 1393.900040, 2787.800080, X, Y) && !ellipse(26486.042614, 27890.378000, 407.619212, 342.108810, 40.118000, X, Y) && !ellipse(30399.017548, 27361.148956, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26083.259460, 27698.796997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29049.535187, 23713.961761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29167.341020, 23395.663000, 1315.128038, 290.784808, 68.738000, X, Y)
[Mon May  6 20:52:57 2013] Writing fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18.gif
[Mon May  6 20:56:52 2013] Mean detx,y = (-56.11, -1382.99) 
[Mon May  6 20:56:53 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 20:56:59 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 20:56:59 2013] Setting source spectrum file to fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May  6 20:56:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May  6 21:06:09 2013] Updating aperture counts using extracted products
[Mon May  6 21:06:09 2013] Total counts from fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 351.00
[Mon May  6 21:06:09 2013] Total counts from fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18_bgd.pi.gz = 2184.00
[Mon May  6 21:06:09 2013] Got source and background scale factors 1895416.000000, 15697368.000000
[Mon May  6 21:06:09 2013] User source parameters:
  Position = (312.0, 304.6) = 16 34 16.20 57 8 36.9
  Extent = 13.9 (13.6-27.9)", rotation angle = 0
  Source aperture counts = 87.3 +/- 19.8
  Background aperture counts = 263.7
  Rate = 0.004 +/- 0.0008

[Mon May  6 21:06:10 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 21:06:10 2013] Using photon index=1.80, rate=0.00505, arf fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18.arf
[Mon May  6 21:06:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 21:06:10 2013] Updating source flux to 5.5e-14
[Mon May  6 21:06:13 2013] xmm0049540301/analysis//spectral/fullrun_mos2_xmm0049540301_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete