[Sun Aug 19 10:53:38 2012] Detection parameters:
  Position = (318.1, 279.0) = 14 29 35.55 -62 43 40.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 471.2 +/- 37.0
  Background counts = 269.0
  Rate = 0.01 +/- 0.0009

[Sun Aug 19 10:53:38 2012] Off-axis axis estimate = 2.01'
[Sun Aug 19 11:15:01 2012] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 11:15:01 2012] Initial guess for spatial extent in simple fitting = 7.43"
[Sun Aug 19 11:15:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.820
[Sun Aug 19 11:15:01 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.43"
[Sun Aug 19 11:26:38 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Aug 19 11:26:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_src3.csv
[Sun Aug 19 11:26:38 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Aug 19 11:26:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_src3.csv
[Sun Aug 19 11:26:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 11:26:38 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Aug 19 11:26:38 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Aug 19 11:26:38 2012] Fit fullrun_pn_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Aug 19 14:45:16 2012] Spatial fit model total counts = 3870.640000, observed total counts = 3821.000000
[Sun Aug 19 14:45:16 2012] Offset between fit and detection position for source 3 = 2.486173 pixels
[Sun Aug 19 14:45:16 2012] 3913.300000 total counts/ 2718.250000 bgd. counts: snr = 22.921413
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.486173 pixels
  Position = (319.2, 276.7) = 14 29 34.83 -62 43 46.9
  Extent = 14.9 (14.7-29.7)", rotation angle = 0
  Source counts = 1195.0 +/- 62.6
  Background counts = 2718.2
  Rate = 0.02 +/- 0.001
[Sun Aug 19 14:45:16 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 14:45:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 14:45:16 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 14:45:16 2012] Source does appear to be extended
[Sun Aug 19 14:45:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 14:45:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 14:45:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 14:45:37 2012] Initial guess for spatial extent in simple fitting = 14.86"
[Sun Aug 19 14:45:37 2012] source mask rpix=3.4, npix_max = 61, mask sum = 64, frac = 1.043
[Sun Aug 19 14:45:37 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.86"
[Sun Aug 19 17:30:07 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Aug 19 17:30:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_src3.csv
[Sun Aug 19 17:30:07 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Aug 19 17:30:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_src3.csv
[Sun Aug 19 17:30:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 17:30:07 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Aug 19 17:30:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Aug 19 17:30:07 2012] fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Aug 19 17:30:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Aug 19 17:30:07 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:03:43 2012] Warning, spatial fit 3 centroid is now closest to src. 22
[Sun Aug 19 18:03:43 2012] Source 3 in spatial fitting is no longer close to this source
[Sun Aug 19 18:03:43 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:03:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:03:43 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 18:03:43 2012] Source does appear to be extended
[Sun Aug 19 18:03:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 18:03:58 2012] Counts = 1195.050000, rescaling region sizes by 2.000000
[Sun Aug 19 18:03:58 2012] XMMSAS src. selection expression = ellipse(27724.191000, 24028.440000, 1783.584051, 1783.584051, 0.000000, X, Y)
[Sun Aug 19 18:03:58 2012] Writing source region out to fullrun_pn_xmm0049350101_pi300-10000_pass1_cl_src3_src.reg
[Sun Aug 19 18:03:58 2012] Extracting stamp from image fullrun_pn_xmm0049350101_pi300-10000_cl_sm2.00.img.gz, (217, 174) - (422, 379)
[Sun Aug 19 18:03:58 2012] XMMSAS bgd. selection expression = annulus(27724.191000, 24028.440000, 5945.280171, 11890.560342, X, Y) && !ellipse(26729.902000, 27680.812000, 1597.841654, 1597.841654, 0.000000, X, Y) && !ellipse(27292.091200, 25675.564000, 1136.480033, 1136.480033, 0.000000, X, Y)
[Sun Aug 19 18:03:58 2012] Writing fullrun_pn_xmm0049350101_pi300-10000_pass1_cl_src3.gif
[Sun Aug 19 18:33:52 2012] Mean detx,y = (210.23, 3120.40) 
[Sun Aug 19 18:34:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 18:36:48 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 18:36:49 2012] Setting source spectrum file to fullrun_pn_xmm0049350101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 19 18:36:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0049350101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Aug 19 20:06:52 2012] Updating aperture counts using extracted products
[Sun Aug 19 20:06:52 2012] Error reading totcts from fullrun_pn_xmm0049350101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Aug 19 20:06:52 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 20:06:52 2012] Using photon index=1.80, rate=0.0182, arf fullrun_pn_xmm0049350101_pi300-10000_pass1_cl_src3.arf
[Sun Aug 19 20:06:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 20:06:52 2012] Updating source flux to 7.2e-14