[Sun Aug 19 10:54:34 2012] Detection parameters:
  Position = (307.9, 318.8) = 14 29 41.98 -62 40 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143550.0 +/- 439.3
  Background counts = 94.2
  Rate = 2 +/- 0.007

[Sun Aug 19 10:54:35 2012] Off-axis axis estimate = 1.63'
[Sun Aug 19 12:11:01 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 12:11:01 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Aug 19 12:11:01 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Sun Aug 19 12:11:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.24"
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Aug 19 14:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Aug 19 14:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src1.csv
[Sun Aug 19 14:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Aug 19 14:45:11 2012] Fit fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Aug 19 14:45:29 2012] Spatial fit model total counts = 131000.000000, observed total counts = 126917.000000
[Sun Aug 19 14:45:29 2012] Offset between fit and detection position for source 5 = 0.399066 pixels
[Sun Aug 19 14:45:29 2012] 131606.300000 total counts/ 20440.300000 bgd. counts: snr = 777.550037
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.399066 pixels
  Position = (307.6, 318.7) = 14 29 42.22 -62 40 44.7
  Extent = 7.4 (7.4-7.4)", rotation angle = 0
  Source counts = 111166.0 +/- 362.8
  Background counts = 20440.3
  Rate = 2 +/- 0.006
[Sun Aug 19 14:45:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 14:45:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 14:45:29 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 14:45:29 2012] Source does appear to be extended
[Sun Aug 19 14:45:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 17:45:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Aug 19 17:45:30 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Sun Aug 19 17:45:30 2012] source mask rpix=1.7, npix_max = 19, mask sum = 25, frac = 1.292
[Sun Aug 19 17:45:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.39"
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug 19 18:03:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug 19 18:03:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src1.csv
[Sun Aug 19 18:03:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug 19 18:03:40 2012] Fit fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug 19 18:03:50 2012] Spatial fit model total counts = 126685.000000, observed total counts = 127301.000000
[Sun Aug 19 18:03:50 2012] Offset between fit and detection position for source 5 = 0.172648 pixels
[Sun Aug 19 18:03:50 2012] 127415.000000 total counts/ 25600.000000 bgd. counts: snr = 636.343750
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.172648 pixels
  Position = (307.7, 318.6) = 14 29 42.12 -62 40 44.8
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 101815.0 +/- 357.0
  Background counts = 25600.0
  Rate = 2 +/- 0.005
[Sun Aug 19 18:03:50 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:03:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:03:50 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 18:03:50 2012] Source does appear to be extended
[Sun Aug 19 18:03:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 19:48:07 2012] Counts = 101815.000000, rescaling region sizes by 3.000000
[Sun Aug 19 19:48:07 2012] XMMSAS src. selection expression = ellipse(26724.350200, 27670.452600, 1027.701030, 1027.701030, 0.000000, X, Y)
[Sun Aug 19 19:48:07 2012] Writing source region out to fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5_src.reg
[Sun Aug 19 19:48:07 2012] Extracting stamp from image fullrun_mos2_xmm0049350101_pi300-10000_cl_sm2.00.img.gz, (249, 260) - (367, 378)
[Sun Aug 19 19:48:07 2012] XMMSAS bgd. selection expression = annulus(26724.350200, 27670.452600, 5138.505148, 10277.010296, X, Y) && !ellipse(36041.605286, 20587.293060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27396.779449, 28308.819183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26916.848389, 38070.103424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33916.703033, 26297.589355, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Aug 19 19:48:07 2012] Writing fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5.gif
[Sun Aug 19 19:48:40 2012] Mean detx,y = (-0.34, -132.45) 
[Sun Aug 19 19:48:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 19:52:03 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 19:52:04 2012] Setting source spectrum file to fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Aug 19 19:52:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Aug 19 20:06:53 2012] Updating aperture counts using extracted products
[Sun Aug 19 20:06:53 2012] Error reading totcts from fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun Aug 19 20:06:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 20:06:54 2012] Using photon index=1.80, rate=1.57, arf fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5.arf
[Sun Aug 19 20:06:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 20:06:54 2012] Updating source flux to 1.6e-11
[Sun Aug 19 20:08:30 2012] Reading fit data from xmm0049350101/analysis//spectral/fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5_pl.csv
[Sun Aug 19 20:08:30 2012] Spectral fit parameter nH value = 4.28123e+21
[Sun Aug 19 20:08:30 2012] Spectral fit parameter PhoIndex value = 5.20317
[Sun Aug 19 20:08:30 2012] Failed to get F(0.3-8.0) from xmm0049350101/analysis//spectral/fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sun Aug 19 20:08:30 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 20:08:30 2012] Using Nh = 4.3e+21, photon index=5.20, rate=1.57, arf fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src5.arf
[Sun Aug 19 20:08:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 20:08:30 2012] Updating source flux to 9.5e-12