[Sun Aug 19 10:54:34 2012] Detection parameters:
  Position = (486.3, 300.8) = 14 27 49.19 -62 41 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 637.7 +/- 32.5
  Background counts = 52.9
  Rate = 0.01 +/- 0.0005

[Sun Aug 19 10:54:35 2012] Off-axis axis estimate = 13.62'
[Sun Aug 19 12:11:01 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 12:11:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 12:11:01 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Sun Aug 19 12:11:01 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sun Aug 19 12:11:01 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.24"
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Aug 19 14:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src3.csv
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Aug 19 14:45:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src3.csv
[Sun Aug 19 14:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Aug 19 14:45:11 2012] Fit fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Aug 19 14:45:29 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.105958 pixels away
[Sun Aug 19 14:45:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 14:45:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 14:45:29 2012] Assessing source extent using major
[Sun Aug 19 14:45:29 2012] Source does appear to be extended
[Sun Aug 19 14:45:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 17:45:30 2012] Using EEF radius (= 13.24 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 17:45:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Aug 19 17:45:30 2012] Initial guess for spatial extent in simple fitting = 13.24"
[Sun Aug 19 17:45:30 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.975
[Sun Aug 19 17:45:30 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.24"
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Aug 19 18:03:40 2012] Fit fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_src3 appears to have run properly
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Aug 19 18:03:40 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Aug 19 18:03:40 2012] Fit fullrun_mos2_xmm0049350101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Aug 19 18:03:50 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 17.105958 pixels away
[Sun Aug 19 18:03:50 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 18:03:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 18:03:50 2012] Assessing source extent using major
[Sun Aug 19 18:03:50 2012] Source does appear to be extended
[Sun Aug 19 18:03:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 19:48:07 2012] XMMSAS src. selection expression = ellipse(42261.651276, 26124.515961, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Aug 19 19:48:07 2012] Writing source region out to fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src2_src.reg
[Sun Aug 19 19:48:07 2012] Extracting stamp from image fullrun_mos2_xmm0049350101_pi300-10000_cl_sm2.00.img.gz, (449, 263) - (524, 338)
[Sun Aug 19 19:48:07 2012] XMMSAS bgd. selection expression = annulus(42261.651276, 26124.515961, 1087.500000, 2175.000000, X, Y)
[Sun Aug 19 19:48:07 2012] Writing fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src2.gif
[Sun Aug 19 19:52:36 2012] Mean detx,y = (-14716.56, -5350.09) 
[Sun Aug 19 19:52:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug 19 19:52:59 2012] Binned source spectrum to 10 counts/bin
[Sun Aug 19 19:52:59 2012] Setting source spectrum file to fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 19 19:52:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Aug 19 19:59:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Aug 19 19:59:55 2012] rmf not generated due to insufficient counts
[Sun Aug 19 20:06:53 2012] Updating aperture counts using extracted products
[Sun Aug 19 20:06:53 2012] Error reading totcts from fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Aug 19 20:06:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug 19 20:06:54 2012] Using photon index=1.80, rate=0.0096, arf fullrun_mos2_xmm0049350101_pi300-10000_pass1_cl_src2.arf
[Sun Aug 19 20:06:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug 19 20:06:54 2012] Updating source flux to 2.3e-13
[Sun Aug 19 20:07:47 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting