[Sun Aug 19 10:54:34 2012] Detection parameters:
  Position = (228.1, 304.5) = 14 30 32.42 -62 41 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 181.4 +/- 17.6
  Background counts = 69.0
  Rate = 0.005 +/- 0.0004

[Sun Aug 19 10:54:35 2012] Off-axis axis estimate = 5.11'
[Sun Aug 19 12:11:01 2012] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting
[Sun Aug 19 12:11:01 2012] Initial guess for spatial extent in simple fitting = 8.99"
[Sun Aug 19 12:11:01 2012] source mask rpix=2.1, npix_max = 26, mask sum = 21, frac = 0.797
[Sun Aug 19 12:11:01 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 8.99"
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src5.ximg exists
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Aug 19 14:45:11 2012] Fit fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_src5 appears to have run properly
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Aug 19 14:45:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Aug 19 14:45:11 2012] fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Aug 19 14:45:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sun Aug 19 14:45:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049350101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug 19 14:45:29 2012] Spatial fit model total counts = -693.541000, observed total counts = 628.000000
[Sun Aug 19 14:45:29 2012] Poor agreement between spatial fit and data for source 17
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Aug 19 14:45:29 2012] Spatial fit model total counts = 850.275000, observed total counts = 850.000000
[Sun Aug 19 14:45:29 2012] Offset between fit and detection position for source 17 = 0.402208 pixels
[Sun Aug 19 14:45:29 2012] Warning, changing simple spatial fit ID from 5 to 10
[Sun Aug 19 14:45:29 2012] 856.853500 total counts/ 782.496000 bgd. counts: snr = 2.658176
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.402208 pixels
  Position = (228.5, 304.5) = 14 30 32.17 -62 41 45.9
  Extent = 4.6 (3.5-6.4)", rotation angle = 0
  Source counts = 74.4 +/- 29.3
  Background counts = 782.5
  Rate = 0.001 +/- 0.0005
[Sun Aug 19 14:45:29 2012] Vigneting correction estimate = 1.000000
[Sun Aug 19 14:45:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug 19 14:45:29 2012] Assessing source extent using major axis lower bound
[Sun Aug 19 14:45:29 2012] Source does appear to be extended
[Sun Aug 19 14:45:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug 19 14:45:29 2012] Deleting source due to low Poisson probability 0.9