[Sun Oct  9 12:02:18 2011] Detection parameters:
  Position = (385.8, 208.3) = 22 20 23.50 -24 48 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.9 +/- 7.9
  Background counts = 7.2
  Rate = 0.002 +/- 0.0005

[Sun Oct  9 12:02:18 2011] Off-axis axis estimate = 9.10'
[Sun Oct  9 13:12:43 2011] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 13:12:43 2011] Initial guess for spatial extent in simple fitting = 10.98"
[Sun Oct  9 13:12:43 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Sun Oct  9 13:12:43 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 10.98"
[Sun Oct  9 13:47:37 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src20.ximg exists
[Sun Oct  9 13:47:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src20.csv
[Sun Oct  9 13:47:37 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun Oct  9 13:47:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src20.csv
[Sun Oct  9 13:47:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 13:47:38 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun Oct  9 13:47:38 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun Oct  9 13:47:38 2011] Fit fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun Oct  9 13:47:51 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 13.938428 pixels away
[Sun Oct  9 13:47:51 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 13:47:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 13:47:51 2011] Assessing source extent using major
[Sun Oct  9 13:47:51 2011] Source does appear to be extended
[Sun Oct  9 13:47:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 14:49:15 2011] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 14:49:15 2011] Initial guess for spatial extent in simple fitting = 10.98"
[Sun Oct  9 14:49:15 2011] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Sun Oct  9 14:49:15 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 10.98"
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src20.ximg exists
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun Oct  9 15:27:50 2011] Fit fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src20 appears to have run properly
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun Oct  9 15:27:50 2011] Fit fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun Oct  9 15:28:02 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 30 at 14.911446 pixels away
[Sun Oct  9 15:28:02 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 15:28:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 15:28:02 2011] Assessing source extent using major
[Sun Oct  9 15:28:02 2011] Source does appear to be extended
[Sun Oct  9 15:28:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 16:16:39 2011] XMMSAS src. selection expression = ellipse(33516.462677, 18074.022415, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Oct  9 16:16:39 2011] Writing source region out to fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src30_src.reg
[Sun Oct  9 16:16:39 2011] Extracting stamp from image fullrun_mos2_xmm0049340201_pi300-10000_cl_sm2.00.img.gz, (348, 171) - (423, 246)
[Sun Oct  9 16:16:39 2011] XMMSAS bgd. selection expression = annulus(33516.462677, 18074.022415, 1087.500000, 2175.000000, X, Y)
[Sun Oct  9 16:16:39 2011] Writing fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src30.gif
[Sun Oct  9 16:19:16 2011] Mean detx,y = (-8792.85, -5963.06) 
[Sun Oct  9 16:19:17 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Oct  9 16:19:29 2011] Binned source spectrum to 10 counts/bin
[Sun Oct  9 16:19:29 2011] Setting source spectrum file to fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Oct  9 16:19:29 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src30_bgd.pi.gz
[Sun Oct  9 16:24:52 2011] Not generating rmf since there are only 32 counts
[Sun Oct  9 16:24:52 2011] rmf not generated due to insufficient counts
[Sun Oct  9 16:25:51 2011] Updating aperture counts using extracted products
[Sun Oct  9 16:25:51 2011] Error reading totcts from fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src30_src_b10.pi.gz
[Sun Oct  9 16:25:51 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 16:25:51 2011] Using photon index=1.80, rate=0.00198, arf fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src30.arf
[Sun Oct  9 16:25:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Oct  9 16:25:51 2011] Updating source flux to 3.3e-14
[Sun Oct  9 16:26:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting