[Sun Oct  9 12:02:18 2011] Detection parameters:
  Position = (287.9, 341.5) = 22 20 54.77 -24 38 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.9 +/- 10.1
  Background counts = 9.0
  Rate = 0.002 +/- 0.0004

[Sun Oct  9 12:02:18 2011] Off-axis axis estimate = 3.21'
[Sun Oct  9 13:12:43 2011] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Sun Oct  9 13:12:43 2011] Initial guess for spatial extent in simple fitting = 8.03"
[Sun Oct  9 13:12:43 2011] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.908
[Sun Oct  9 13:12:43 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 8.03"
[Sun Oct  9 13:47:37 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src17.ximg exists
[Sun Oct  9 13:47:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src17.csv
[Sun Oct  9 13:47:37 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun Oct  9 13:47:37 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src17.csv
[Sun Oct  9 13:47:37 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 13:47:38 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun Oct  9 13:47:38 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun Oct  9 13:47:38 2011] Fit fullrun_mos2_xmm0049340201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun Oct  9 13:47:51 2011] Spatial fit model total counts = 195.757000, observed total counts = 195.000000
[Sun Oct  9 13:47:51 2011] Offset between fit and detection position for source 12 = 3.232628 pixels
[Sun Oct  9 13:47:51 2011] 192.272500 total counts/ 52.034500 bgd. counts: snr = 19.441063
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 3.232628 pixels
  Position = (290.5, 343.4) = 22 20 53.95 -24 38 30.7
  Extent = 14.5 (11.5-16.1)", rotation angle = 0
  Source counts = 140.2 +/- 13.9
  Background counts = 52.0
  Rate = 0.005 +/- 0.0005
[Sun Oct  9 13:47:51 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 13:47:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 13:47:51 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 13:47:51 2011] Source does appear to be extended
[Sun Oct  9 13:47:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 13:47:51 2011] Source is confused with source 11
[Sun Oct  9 14:49:15 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Oct  9 14:49:15 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Oct  9 14:49:15 2011] Initial guess for spatial extent in simple fitting = 14.54"
[Sun Oct  9 14:49:15 2011] source mask rpix=3.3, npix_max = 59, mask sum = 49, frac = 0.830
[Sun Oct  9 14:49:15 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 14.54"
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src17.ximg exists
[Sun Oct  9 15:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src17.csv
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun Oct  9 15:27:50 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src17.csv
[Sun Oct  9 15:27:50 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun Oct  9 15:27:50 2011] fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun Oct  9 15:27:50 2011] Fit fullrun_mos2_xmm0049340201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun Oct  9 15:28:02 2011] Warning, spatial fit 17 centroid is now closest to src. 18
[Sun Oct  9 15:28:02 2011] Vigneting correction estimate = 1.000000
[Sun Oct  9 15:28:02 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Oct  9 15:28:02 2011] Assessing source extent using major axis lower bound
[Sun Oct  9 15:28:02 2011] Source does appear to be extended
[Sun Oct  9 15:28:02 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Oct  9 16:16:39 2011] XMMSAS src. selection expression = ellipse(25223.148000, 29827.966400, 872.280025, 872.280025, 0.000000, X, Y)
[Sun Oct  9 16:16:39 2011] Writing source region out to fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12_src.reg
[Sun Oct  9 16:16:39 2011] Extracting stamp from image fullrun_mos2_xmm0049340201_pi300-10000_cl_sm2.00.img.gz, (240, 293) - (341, 394)
[Sun Oct  9 16:16:39 2011] XMMSAS bgd. selection expression = annulus(25223.148000, 29827.966400, 1453.800042, 2907.600084, X, Y) && !ellipse(25381.350440, 29937.701950, 438.911630, 353.463617, 102.988067, X, Y)
[Sun Oct  9 16:16:39 2011] Writing fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12.gif
[Sun Oct  9 16:18:53 2011] Mean detx,y = (3305.32, 1740.99) 
[Sun Oct  9 16:18:54 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Oct  9 16:18:59 2011] Binned source spectrum to 10 counts/bin
[Sun Oct  9 16:19:00 2011] Setting source spectrum file to fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Oct  9 16:19:00 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sun Oct  9 16:25:51 2011] Updating aperture counts using extracted products
[Sun Oct  9 16:25:51 2011] Error reading totcts from fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sun Oct  9 16:25:51 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 16:25:51 2011] Using photon index=1.80, rate=0.00516, arf fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12.arf
[Sun Oct  9 16:25:51 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Oct  9 16:25:51 2011] Updating source flux to 6.2e-14
[Sun Oct  9 16:26:05 2011] Flag c found in src. 12 procflags, skipping spectral fitting
[Sun Oct  9 16:26:10 2011] Reading fit data from xmm0049340201/analysis//spectral/fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12_pl.csv
[Sun Oct  9 16:26:10 2011] Spectral fit parameter nH value = 1.19118e+21
[Sun Oct  9 16:26:10 2011] Spectral fit parameter PhoIndex value = 1.83284
[Sun Oct  9 16:26:10 2011] Failed to get F(0.3-8.0) from xmm0049340201/analysis//spectral/fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12_pl.csv, possibly due to different flux energy range selected
[Sun Oct  9 16:26:10 2011] Calculating source flux in energy range 0.30-8.00
[Sun Oct  9 16:26:10 2011] Using Nh = 1.2e+21, photon index=1.83, rate=0.00516, arf fullrun_mos2_xmm0049340201_pi300-10000_pass1_cl_src12.arf
[Sun Oct  9 16:26:10 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Oct  9 16:26:10 2011] Updating source flux to 6.7e-14